NISMO Titanium Shift Knob installed!!!!

eddieconfetti · 04-16-2011, 10:50 PM

i did it and i love it. Seriously is agreat shift knob. only sad thing is i destroyed my stock knob.

nynhex · 05-13-2011, 01:39 PM

I love the looks of this shift knob. I think I'll get one for my 370z. Where did everyone get theirs? Sorry for thread-jacking

FromG2Z · 05-13-2011, 02:12 PM

I got the knob from my local dealer.... you can get it anywhere. Even our sponsors on here have them.

And yes, it rocks.

bflosabre91 · 05-13-2011, 02:19 PM

i ordered the black aluminum knob about a week ago. can't wait for it to come in. I got mine from thezstore.com. I hope my install goes as smooth as the OP. Thanks for the how to tho, OP. i will def be using this in the next week or so

RoshDawg · 05-13-2011, 02:39 PM

Does anyone have the cf nismo knob? With a carbonsignal cf gear shift cover I would imagine these two products would look great with each other

FromG2Z · 05-13-2011, 02:52 PM

Quote:

Originally Posted by bflosabre91

i ordered the black aluminum knob about a week ago. can't wait for it to come in. I got mine from thezstore.com. I hope my install goes as smooth as the OP. Thanks for the how to tho, OP. i will def be using this in the next week or so

Np on the how-to... I figurd I would try to help out someone else with my DIY... Let me know how that turns out. I got the Ti because I liked the look of it with the brushed nickel in the interior of our Z's.

TWYNBYZ · 05-13-2011, 03:07 PM

I just got the Nismo CF knob but haven't installed it because I need the strap wrench. I guess I'll be stopping by home depot on the way home!

kenchan · 05-13-2011, 03:45 PM

my titanium knob should be in my hands tonight.

will be installing tomorrow.

(and yes, thanks to G2Z i have my strap wrench ready).

nynhex · 05-13-2011, 05:30 PM

I'm so undecided between the black knob and the TI/Brushed knob. I guess my touring interior is throwing me off a bit.

kenchan · 05-13-2011, 05:33 PM

if i was going to do a black knob id get the delrin one (matte-black) from passwordjdm and get a titanium ring for the bottom where it meets the boot.

FromG2Z · 05-13-2011, 05:38 PM

Quote:

Originally Posted by kenchan

my titanium knob should be in my hands tonight.

will be installing tomorrow.

(and yes, thanks to G2Z i have my strap wrench ready).

Ken, you HAVE to post pics of your install and results! I am curious to see how easy the install went for you

I hope you like the looks (and fee) of the Ti knob once you get it installed... I just LOVE mine.

Quote:

Originally Posted by nynhex

I'm so undecided between the black knob and the TI/Brushed knob. I guess my touring interior is throwing me off a bit.

nynhex, I would go with the Ti personally. I looked at the CF and black knobs closely, and it didn't give that "feel" and "look" I was going for. It might be right for some modded Z's... but for mine, I wanted it tasteful, yet sporty and aggressive looking, you know? The Ti makes it look stock, but in a sporty kind of way..... like it was "meant" to be there. (same with my exhaust, but that's a diff't story

)

kenchan · 05-13-2011, 05:51 PM

Quote:

Originally Posted by FromG2Z

Ken, you HAVE to post pics of your install and results! I am curious to see how easy the install went for you

I hope you like the looks (and fee) of the Ti knob once you get it installed... I just LOVE mine.

hahaha, i'll post picts if i fail removing the stock knob. how's that?

i hope i can take it off without breaking it and use it on my G.

nynhex · 05-13-2011, 06:06 PM

Quote:

Originally Posted by FromG2Z

nynhex, I would go with the Ti personally. I looked at the CF and black knobs closely, and it didn't give that "feel" and "look" I was going for. It might be right for some modded Z's... but for mine, I wanted it tasteful, yet sporty and aggressive looking, you know? The Ti makes it look stock, but in a sporty kind of way..... like it was "meant" to be there. (same with my exhaust, but that's a diff't story

)

Thanks G2Z, that's sort of the look I'm going for. "Factory sporty" lol. Most of the mods I'm doing on my Z will be very subtle and really just there for my amusement. I'm not trying to slap on every little part I see. Thanks for the advice, just need to figure out which vendor to buy from.

kdo2milger · 05-13-2011, 06:15 PM

shift knob looks good.

mental note to self: get these tools from sears for my short shifter install...

RoshDawg · 05-13-2011, 07:03 PM

Quote:

Originally Posted by CGMMNY

I just got the Nismo CF knob but haven't installed it because I need the strap wrench. I guess I'll be stopping by home depot on the way home!

!!

Also, as I'm guessing you're a cf fan like me, check out putting either a fake cf wrap or real cf cover for the alluminum gear shift cover thing.

Hexxis 3D CF film
or
CarbonSignal Interior 11 piece Carbon fiber kit

05-13-2011, 02:12 PM	#33 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 18	I got the knob from my local dealer.... you can get it anywhere. Even our sponsors on here have them. And yes, it rocks. __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

05-13-2011, 02:19 PM	#34 (permalink)
bflosabre91 Base Member Join Date: Mar 2011 Location: na Posts: 114 Drives: car Rep Power: 14	i ordered the black aluminum knob about a week ago. can't wait for it to come in. I got mine from thezstore.com. I hope my install goes as smooth as the OP. Thanks for the how to tho, OP. i will def be using this in the next week or so __________________ Zzzzzzzzz

05-13-2011, 02:39 PM	#35 (permalink)
RoshDawg Track Member Join Date: May 2011 Location: NM / CA Posts: 981 Drives: '13 911 C2S Rep Power: 15	Does anyone have the cf nismo knob? With a carbonsignal cf gear shift cover I would imagine these two products would look great with each other __________________ \| EVO X MR \| '11 WRX STI \| 370Z SPRT \| 911 (991) C2S \|

05-13-2011, 06:15 PM	#44 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 59	shift knob looks good. mental note to self: get these tools from sears for my short shifter install... __________________ Project *NISMO*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo Titanium Shift Knob Open-O Design Installed	karotZ	40th Anniversary 370Z	22	03-04-2011 04:58 PM
FS: NISMO titanium shift knob	VancouverZ34	Parts for sale (Private Classifieds)	5	02-26-2011 09:43 AM
NISMO GT Titanium shift knob!	corner3garage	Body Interior/Exterior	4	01-16-2010 02:52 AM

04-16-2011, 10:50 PM	#31 (permalink)
eddieconfetti A True Z Fanatic Join Date: Jun 2009 Location: Duluth, GA Posts: 3,334 Drives: A Totaled PW Z Rep Power: 23	i did it and i love it. Seriously is agreat shift knob. only sad thing is i destroyed my stock knob.

05-13-2011, 01:39 PM	#32 (permalink)
nynhex Base Member Join Date: Apr 2011 Location: Houston Posts: 247 Drives: 370z Rep Power: 371	I love the looks of this shift knob. I think I'll get one for my 370z. Where did everyone get theirs? Sorry for thread-jacking

05-13-2011, 03:07 PM	#37 (permalink)
TWYNBYZ Base Member Join Date: Jan 2011 Location: S. Cali Posts: 229 Drives: 2013 Pearl White GTR Rep Power: 14	I just got the Nismo CF knob but haven't installed it because I need the strap wrench. I guess I'll be stopping by home depot on the way home!

05-13-2011, 03:45 PM	#38 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	my titanium knob should be in my hands tonight. will be installing tomorrow. (and yes, thanks to G2Z i have my strap wrench ready).

05-13-2011, 05:30 PM	#39 (permalink)
nynhex Base Member Join Date: Apr 2011 Location: Houston Posts: 247 Drives: 370z Rep Power: 371	I'm so undecided between the black knob and the TI/Brushed knob. I guess my touring interior is throwing me off a bit.

05-13-2011, 05:33 PM	#40 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	if i was going to do a black knob id get the delrin one (matte-black) from passwordjdm and get a titanium ring for the bottom where it meets the boot.