OEM shift knob removal (SEARCHED)

kenchan · 01-05-2015, 12:22 AM

but you still need to make a collar inside the boot regardless to keep the boot up.

i use packing material from wire shelves... and hell i have a ton of those from the wire shelves i made 2yrs ago

Dragon_Ball_Z · 01-20-2015, 01:54 AM

Stock knob is h*ll. I broke two strap wrenches already. Going to give it another go tomorrow. Shift knob still intact for now.

blackcherry20 · 01-20-2015, 07:23 PM

Quote:

Originally Posted by rajmangal7

Stock knob is h*ll. I broke two strap wrenches already. Going to give it another go tomorrow. Shift knob still intact for now.

Shift knob=1
rajmangal7=0

( Click to show/hide )

Dragon_Ball_Z · 01-20-2015, 07:24 PM

Quote:

Originally Posted by blackcherry20

Shift knob=1

rajmangal7=0

( Click to show/hide )

I tried again today and broke two more wrenches. It won't come off

-Raj

blackcherry20 · 01-20-2015, 07:29 PM

Quote:

Originally Posted by rajmangal7

I tried again today and broke two more wrenches. It won't come off

-Raj

Hold the shifter arm / shaft with a set of vise grips then strap wrench on the knob. Have somebody hold the vise grips for you. Thats what I did while hubby worked the strap wrench. It broke loose finally. You removed the boot-right?

Dragon_Ball_Z · 01-20-2015, 07:30 PM

Quote:

Originally Posted by blackcherry20

Hold the shifter arm / shaft with a set of vise grips then strap wrench on the knob. Have somebody hold the vise grips for you. Thats what I did while hubby worked the strap wrench. It broke loose finally. You removed the boot-right?

I did that exactly

-Raj

blackcherry20 · 01-20-2015, 07:32 PM

Quote:

Originally Posted by rajmangal7

I did that exactly

-Raj

Some people have had the same troubles. Dang. I got nothing.

Sorry.

1st · 01-20-2015, 07:34 PM

Try 2 strap wrenches forget the vise grips they slip. Thats how I did mine.

YzGyz · 01-20-2015, 07:57 PM

I have the stock shifter knob and like it as is. If I were to take the OEM off, I would grab 1 mouse pad and cut it in half. Wrap one around the base and the other piece around the knob. Apply two pipe wrenches and twist. Pipe wrenches can get just about anything loose given you have space to turn them.

YzGyz

Dragon_Ball_Z · 01-20-2015, 08:13 PM

Quote:

Originally Posted by 1st

Try 2 strap wrenches forget the vise grips they slip. Thats how I did mine.

I don't want to damage the Oem knob

-Raj

Dragon_Ball_Z · 01-20-2015, 08:13 PM

Quote:

Originally Posted by YzGyz

I have the stock shifter knob and like it as is. If I were to take the OEM off, I would grab 1 mouse pad and cut it in half. Wrap one around the base and the other piece around the knob. Apply two pipe wrenches and twist. Pipe wrenches can get just about anything loose given you have space to turn them.

YzGyz

I tried a pipe wrench

-Raj

Dragon_Ball_Z · 01-20-2015, 08:19 PM

When I say it won't come off I'm serious

-Raj

YzGyz · 01-20-2015, 08:24 PM

You need a bigger wrench and need to grab it closer to where it connect the rod. The other pipe wrench needs to up high closer to the knob. With a big enough wrench and space, it will turn if not bust and tear apart. If it tears apart, it can't be helped as it was put on by Jeebus himself.

YzGyz

kenchan · 01-20-2015, 08:24 PM

yah, mine looked like it was dipped in thread lock when i took it off.

i broke 2 strap wrenches and i was like f- it. used my oil filter wrench and twisted it off.
i bought a used one from a local guy (no scratches) who said he had no issue removing his stock knob from his 370z.

currently my Z runs twm biggie type-r

Dragon_Ball_Z · 01-20-2015, 08:26 PM

Quote:

Originally Posted by YzGyz

You need a bigger wrench and need to grab it closer to where it connect the rod. The other pipe wrench needs to up high closer to the knob. With a big enough wrench and space, it will turn if not bust and tear apart. If it tears apart, it can't be helped as it was put on by Jeebus himself.

YzGyz

I used strap wrenches on bottom and rotated between vice grips and the pipe wrench to hold the shaft. There are marks on the shaft from the vice grips

-Raj

01-20-2015, 01:54 AM	#62 (permalink)
Dragon_Ball_Z A True Z Fanatic Join Date: Jul 2014 Location: Mississippi Posts: 1,117 Drives: Nismo& Sport/Touring Rep Power: 17	Stock knob is h*ll. I broke two strap wrenches already. Going to give it another go tomorrow. Shift knob still intact for now. __________________ Build in Progress

01-20-2015, 07:34 PM	#68 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,708 Drives: Platinum Z Rep Power: 1616	Try 2 strap wrenches forget the vise grips they slip. Thats how I did mine. SouthArk370Z, blackcherry20 and Dragon_Ball_Z like this.

01-20-2015, 07:57 PM	#69 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	I have the stock shifter knob and like it as is. If I were to take the OEM off, I would grab 1 mouse pad and cut it in half. Wrap one around the base and the other piece around the knob. Apply two pipe wrenches and twist. Pipe wrenches can get just about anything loose given you have space to turn them. YzGyz SouthArk370Z and Dragon_Ball_Z like this.

01-20-2015, 08:19 PM	#72 (permalink)
Dragon_Ball_Z A True Z Fanatic Join Date: Jul 2014 Location: Mississippi Posts: 1,117 Drives: Nismo& Sport/Touring Rep Power: 17	When I say it won't come off I'm serious -Raj __________________ Build in Progress

01-20-2015, 08:24 PM	#73 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	You need a bigger wrench and need to grab it closer to where it connect the rod. The other pipe wrench needs to up high closer to the knob. With a big enough wrench and space, it will turn if not bust and tear apart. If it tears apart, it can't be helped as it was put on by Jeebus himself. YzGyz Dragon_Ball_Z likes this.

01-05-2015, 12:22 AM	#61 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	but you still need to make a collar inside the boot regardless to keep the boot up. i use packing material from wire shelves... and hell i have a ton of those from the wire shelves i made 2yrs ago

01-20-2015, 08:24 PM	#74 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, mine looked like it was dipped in thread lock when i took it off. i broke 2 strap wrenches and i was like f- it. used my oil filter wrench and twisted it off. i bought a used one from a local guy (no scratches) who said he had no issue removing his stock knob from his 370z. currently my Z runs twm biggie type-r Dragon_Ball_Z likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: AT Shift knob removal/replacement	Imtired	DIY Section (Do-It-Yourself)	43	04-07-2016 11:24 AM
AT Knob Removal - Help.	chippy	Exterior & Interior	30	11-08-2010 03:58 PM
New Shift Knob... let's try this again!	m4a1mustang	Exterior & Interior	19	06-22-2009 07:41 PM
Shift knob HELp!	DJcuetip	Southern California Region	0	06-16-2009 07:58 AM
S2K Aluminum shift knob to replace OEM knob	initialgemini	Exterior & Interior	12	04-19-2009 03:56 PM