OEM shift knob removal (SEARCHED)

morgan · 03-23-2013, 07:21 PM

Thanks! I tried to get mine off last week and thought I was going to rip the whole shifter out so stopped after a couple twists. Here i come Sears.

Quote:

Originally Posted by FromG2Z

ALRIGHT!!! Thank you to everyone on this forum. I got it done! I used a combination of everyone's suggestions and it worked like a charm

So I used:

1) Robo-grip pliers and rubber protection on plier teeth (both from Sears)
2) Strap wrench (from Sears)

That's it!

Since the Robo-grip pliers had the red rubber protection, I used my left hand and gripped it straight on the shaft after lowering the boot. No marring on the shaft. Then I used my right hand on the strap wrench straight on the stock knob. Voila! It gave IMMEDIATELY. No marring on the knob whatsoever. It was a matter of having the right tools and the right leverage. That stock knob was on there tight though, after loosening it with the strap wrench, I figured I could just loosen it the rest of the way with my hands... but I was wrong. I pretty much had to use the strap wrench all the way till the knob was almost off.

This was my setup. You can see the robo pliers on the left, and the strap wrench on the knob. What a wonderful combo.

Stock knob is off!!! No damage to it (front and back)!!! Look at ALL that Loctite on the shaft threads!!!

And here she is all installed!!! I love it!!!

I was surprised the whole affair took me 15 minutes total... just needed the right tools... amazing. I love the new Nismo knob on there. I haven't driven her yet, but am looking forward to it!!! It looks and feels good though however... exactly the look I am looking for.

Thank you again to EVERYone who chimed in and the existing DYI's posted in this forum. You guys are a tremendous help.

enkei2k · 03-24-2013, 11:42 AM

I got the same strap wrench, but for some reason, it doesn't seem to grip the shifter very well and slides off after a few attempts.

Ss751827 · 01-01-2014, 04:36 PM

After giving it some carefull thought I pulled the trigger and installed a z-car shifter. I followed the instructions from what you guys have previously posted : duct taped the shift knob, channel locked the shifter under the boot, used a strap and with a little leverage it came off,,, thanks guys my original knob is intact.

beharris · 03-26-2014, 08:26 PM

This technique worked perfectly and the Password JDM fits nicely.

Ke0n3 · 07-23-2014, 09:32 PM

This proved to be one of THE most simple, yet irritating removals of all.

My friends and I always joke about having to make a few trips to Home Depot, for anything car related that requires some improvisation.

Well, this damn shift knob took me a trip to Sears (strap wrench), and a trip to Ace (pipe wrench). Eventually I gave up on the idea that I wasn't going to demolish the stock shift knob...I mean we hardly ever reuse or sell stock parts such as these, but we ALL feel the need to keep them in mint condition.

Well, I gave up when I just wanted to get the damn thing off. The protective towel technique was never going to work in my case, because I needed so much torque to get this damn thing off.

The strap wrench was worthless for my application.
The pipe wrench worked, but I seriously had to use it to turn the damn knob 7-8 turns before I could use my hands to remove it. I guess Nissan has had problems with these things just falling off all the time or something...lol

Anyway, after demolishing the stock knob, I'm ready to finally install my short shifter and new knob. I will post a pic once finished, but I really felt the need to vent...

I feel better already

kenchan · 07-23-2014, 09:38 PM

i broke two strap wrenches trying to get the stock one off.

i said f-k it and used my larger oil filter wrench. (currently running biggy type-r knob)
bought a used mint one from a local member. he told me his came off easy.

aszyd · 07-23-2014, 09:52 PM

Yup, following the DIY, I picked up a strap wrench and thought it would simple. My god, we always talk about demon bolts, well this was a damned demon knob! I didn't break the wrench, but I thought I was going to. I was so happy when I finally got the thing off.

jdsto · 07-23-2014, 10:43 PM

I took mine off simply using a strap wrench. I didn't need the vice grips below the boot. It did take a surprising amount of force.

With out the strap wrench you would need a pretty serious "Kung Fu Grip".

kazman · 08-24-2014, 12:11 AM

subscribed

OldBonesMcGee · 12-29-2014, 04:37 AM

I'm about to attempt this, I just wondered if anyone has a picture of the underside showing exactly where they clamped the mole grips to?

If you are clamping straight onto a perfectly round metal shaft is the likelihood of it slipping not fairly high?

Cheers

Dan

Vaibe · 01-04-2015, 07:36 PM

Sorry to bump an old thread, but I didn't want to make a new one for a simple question. I finally got my OEM knob off and installed one from flossy, but now there's a space between the knob and boot, anyone know what I can do to get rid of it?

Here's a picture:

http://i.imgur.com/bsyL6dR.jpg

blackcherry20 · 01-04-2015, 07:38 PM

Kenchan finds the gasket/plumbing/ hardware aisles at home depot very handy. Seriously. GL!

cooltoy · 01-04-2015, 08:22 PM

Zeetoyz Inc. - Nissan 350Z, Ring Kits, Engines, Cold Air Intake

law2004 · 01-04-2015, 11:17 PM

i destroyed my shift knob lol

kenchan · 01-05-2015, 12:18 AM

ballcock shank washer mod...

i just realized i did the "washer mod" on my car unknowingly...

03-24-2013, 11:42 AM	#47 (permalink)
enkei2k A True Z Fanatic Join Date: Apr 2011 Location: NYC Posts: 6,365 Drives: '12 G41 B/S M6 Rep Power: 3716	I got the same strap wrench, but for some reason, it doesn't seem to grip the shifter very well and slides off after a few attempts. Benique_Z likes this. __________________ ...need boost...

01-01-2014, 04:36 PM	#48 (permalink)
Ss751827 Base Member Join Date: Nov 2013 Location: Maryland Posts: 4 Drives: 2014 Z roadster Rep Power: 12	Shift knob removal After giving it some carefull thought I pulled the trigger and installed a z-car shifter. I followed the instructions from what you guys have previously posted : duct taped the shift knob, channel locked the shifter under the boot, used a strap and with a little leverage it came off,,, thanks guys my original knob is intact. Benique_Z likes this.

03-26-2014, 08:26 PM	#49 (permalink)
beharris Base Member Join Date: Dec 2013 Location: Chesapeake, VA Posts: 4 Drives: 2014 Nissan 370z M6 Rep Power: 11	Password:JDM Acetal Copolymer Shift Knob Type II--Installed! This technique worked perfectly and the Password JDM fits nicely.

07-23-2014, 09:38 PM	#51 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i broke two strap wrenches trying to get the stock one off. i said f-k it and used my larger oil filter wrench. (currently running biggy type-r knob) bought a used mint one from a local member. he told me his came off easy. aszyd likes this.

07-23-2014, 09:52 PM	#52 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	Yup, following the DIY, I picked up a strap wrench and thought it would simple. My god, we always talk about demon bolts, well this was a damned demon knob! I didn't break the wrench, but I thought I was going to. I was so happy when I finally got the thing off. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

07-23-2014, 09:32 PM	#50 (permalink)
Ke0n3 Base Member Join Date: Sep 2011 Location: Orangevale, CA Posts: 51 Drives: 2012 370Z Rep Power: 14	This proved to be one of THE most simple, yet irritating removals of all. My friends and I always joke about having to make a few trips to Home Depot, for anything car related that requires some improvisation. Well, this damn shift knob took me a trip to Sears (strap wrench), and a trip to Ace (pipe wrench). Eventually I gave up on the idea that I wasn't going to demolish the stock shift knob...I mean we hardly ever reuse or sell stock parts such as these, but we ALL feel the need to keep them in mint condition. Well, I gave up when I just wanted to get the damn thing off. The protective towel technique was never going to work in my case, because I needed so much torque to get this damn thing off. The strap wrench was worthless for my application. The pipe wrench worked, but I seriously had to use it to turn the damn knob 7-8 turns before I could use my hands to remove it. I guess Nissan has had problems with these things just falling off all the time or something...lol Anyway, after demolishing the stock knob, I'm ready to finally install my short shifter and new knob. I will post a pic once finished, but I really felt the need to vent... I feel better already

07-23-2014, 10:43 PM	#53 (permalink)
jdsto Enthusiast Member Join Date: Feb 2014 Location: Toronto Posts: 250 Drives: Honda VFR800F 2015 Rep Power: 17	I took mine off simply using a strap wrench. I didn't need the vice grips below the boot. It did take a surprising amount of force. With out the strap wrench you would need a pretty serious "Kung Fu Grip".

08-24-2014, 12:11 AM	#54 (permalink)
kazman Enthusiast Member Join Date: Nov 2011 Location: AR Posts: 347 Drives: 12' 370z, 06 Eclipse Rep Power: 14	subscribed

12-29-2014, 04:37 AM	#55 (permalink)
OldBonesMcGee Base Member Join Date: Oct 2013 Location: Aberdeen, UK Posts: 39 Drives: 370z GT Rep Power: 12	I'm about to attempt this, I just wondered if anyone has a picture of the underside showing exactly where they clamped the mole grips to? If you are clamping straight onto a perfectly round metal shaft is the likelihood of it slipping not fairly high? Cheers Dan

01-04-2015, 07:36 PM	#56 (permalink)
Vaibe Base Member Join Date: Oct 2014 Location: Seattle Posts: 51 Drives: 09 Nissan 370z Gray Rep Power: 11	Sorry to bump an old thread, but I didn't want to make a new one for a simple question. I finally got my OEM knob off and installed one from flossy, but now there's a space between the knob and boot, anyone know what I can do to get rid of it? Here's a picture: http://i.imgur.com/bsyL6dR.jpg

01-04-2015, 07:38 PM	#57 (permalink)
blackcherry20 A True Z Fanatic Join Date: May 2012 Location: Southern Ohio Posts: 22,749 Drives: ‘17 badazz Z51 Rep Power: 240459	OEM shift knob removal (SEARCHED) Kenchan finds the gasket/plumbing/ hardware aisles at home depot very handy. Seriously. GL! kenchan likes this. __________________ Grand Sport Corvette Arctic White

01-04-2015, 08:22 PM	#58 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Zeetoyz Inc. - Nissan 350Z, Ring Kits, Engines, Cold Air Intake __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

01-04-2015, 11:17 PM	#59 (permalink)
law2004 Base Member Join Date: Jan 2010 Location: lombard Posts: 73 Drives: 370z 09 or 10 very s Rep Power: 15	i destroyed my shift knob lol

01-05-2015, 12:18 AM	#60 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	ballcock shank washer mod... i just realized i did the "washer mod" on my car unknowingly... blackcherry20 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: AT Shift knob removal/replacement	Imtired	DIY Section (Do-It-Yourself)	43	04-07-2016 11:24 AM
AT Knob Removal - Help.	chippy	Exterior & Interior	30	11-08-2010 03:58 PM
New Shift Knob... let's try this again!	m4a1mustang	Exterior & Interior	19	06-22-2009 07:41 PM
Shift knob HELp!	DJcuetip	Southern California Region	0	06-16-2009 07:58 AM
S2K Aluminum shift knob to replace OEM knob	initialgemini	Exterior & Interior	12	04-19-2009 03:56 PM