OEM CF spoiler/wing

topherhidden · 02-02-2011, 02:54 PM

Hey guys i tried looking for pics with people who have had the CF spoiler installed on their car but with no luck. Anyone have this on their car and have pics? or know of any one who does? preferably a white z.

Thanks all

370Z JT · 02-03-2011, 03:13 AM

Here's looking at you kid!

topherhidden · 02-03-2011, 12:11 PM

nice =) thanks weaked my silver and got a white z started buying some CF parts to make it pop...more then it already does... =)

topherhidden · 02-04-2011, 12:16 PM

how hard was it for you to remove the spoiler and install the new one? i saw a diy on installing it. did u follow that guide?

or should i just take it to the shop and get it installed.

edit... im computer savvy not mechanically savvy....never really done much hands on.

370Z JT · 02-04-2011, 03:06 PM

I had a rough time removing the oem spoiler. Just need to be very patient. I broke mine in half when I pulled too hard.

It is held on by 2 bolts 2 nuts, about 8 clips and very sticky double sided tape. Good luck.

NewYorkJon34 · 02-04-2011, 03:46 PM

2theextreme has the stock wing in cf I believe, it's on a blue Z

topherhidden · 02-05-2011, 12:19 PM

hahahhah damn so i worked on it last night. following the diy to install one. so taking it off was super difficult. after taking off the 2 bolts and 2 nuts. 3m tape was the suck. first tried to fun it saw it off with some floss and heat...no dice...then tried goo gone.....no dice....then tried lighter fluid.....with heat from a blow drier and it started to come off...so at that point it could have been anything really. the heat, the goo gone, the lighter fluid...who knows but it was taking forever and in the end ended up cracking it so said whatever and went to town on it and just breaking it up in pieces. lol

what i wanted to know was so the stock spoiler had all kinds of extra connectors but the wholes were not drilled in the CF wing. the wing only came with 2 bolts and no nuts like the stock one and even if the nuts were there there were no holes to put them in. so i just 3m the hell out of it when i finally applied it on the logic that if it was that hard to make it come off in the first place i would be good. i also covered all the wholes with 3m tape. what did u end up doing and what was your situation with the nuts/bolts/extra connectors.

Thanks =)

02-02-2011, 02:54 PM	#1 (permalink)
topherhidden Base Member Join Date: Aug 2010 Location: westminster, CO Posts: 17 Drives: 2010 370z PW Rep Power: 15	OEM CF spoiler/wing Hey guys i tried looking for pics with people who have had the CF spoiler installed on their car but with no luck. Anyone have this on their car and have pics? or know of any one who does? preferably a white z. Thanks all

02-03-2011, 03:13 AM	#2 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Here's looking at you kid! __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

02-04-2011, 03:06 PM	#5 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	I had a rough time removing the oem spoiler. Just need to be very patient. I broke mine in half when I pulled too hard. It is held on by 2 bolts 2 nuts, about 8 clips and very sticky double sided tape. Good luck. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amuse Wing or Mines Wing Add on	Calvin	Exterior & Interior	54	11-13-2011 10:39 PM
FS: mines carbon fiber rear wing spoiler	zuperman 370	Parts for sale (Private Classifieds)	19	02-04-2011 03:54 PM
Nismo wing / R35 GTR wing	R390	Parts for sale (Private Classifieds)	0	02-02-2011 11:21 AM
G35 (or Altima) style rear wing/spoiler?	turbodog	Exterior & Interior	15	09-24-2010 03:16 PM

02-03-2011, 12:11 PM	#3 (permalink)
topherhidden Base Member Join Date: Aug 2010 Location: westminster, CO Posts: 17 Drives: 2010 370z PW Rep Power: 15	nice =) thanks weaked my silver and got a white z started buying some CF parts to make it pop...more then it already does... =)

02-04-2011, 12:16 PM	#4 (permalink)
topherhidden Base Member Join Date: Aug 2010 Location: westminster, CO Posts: 17 Drives: 2010 370z PW Rep Power: 15	how hard was it for you to remove the spoiler and install the new one? i saw a diy on installing it. did u follow that guide? or should i just take it to the shop and get it installed. edit... im computer savvy not mechanically savvy....never really done much hands on.

02-04-2011, 03:46 PM	#6 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	2theextreme has the stock wing in cf I believe, it's on a blue Z

02-05-2011, 12:19 PM	#7 (permalink)
topherhidden Base Member Join Date: Aug 2010 Location: westminster, CO Posts: 17 Drives: 2010 370z PW Rep Power: 15	hahahhah damn so i worked on it last night. following the diy to install one. so taking it off was super difficult. after taking off the 2 bolts and 2 nuts. 3m tape was the suck. first tried to fun it saw it off with some floss and heat...no dice...then tried goo gone.....no dice....then tried lighter fluid.....with heat from a blow drier and it started to come off...so at that point it could have been anything really. the heat, the goo gone, the lighter fluid...who knows but it was taking forever and in the end ended up cracking it so said whatever and went to town on it and just breaking it up in pieces. lol what i wanted to know was so the stock spoiler had all kinds of extra connectors but the wholes were not drilled in the CF wing. the wing only came with 2 bolts and no nuts like the stock one and even if the nuts were there there were no holes to put them in. so i just 3m the hell out of it when i finally applied it on the logic that if it was that hard to make it come off in the first place i would be good. i also covered all the wholes with 3m tape. what did u end up doing and what was your situation with the nuts/bolts/extra connectors. Thanks =)