Best Looking side skirts (Opinions needed)

Fire · 02-26-2011, 11:06 PM

I've got stock sides. As stated before I recieved stillen sides but they didn't fit. Has anyone seen any aftermarket sides on a vert? I think that there is a differance just behind the door, maybe some reinforcement for the vert. This might make any sides that replace stock ones hard to fit unless it is taken into account. I'm lowered on Eibachs a little over an inch I think. I have to measure to be sure. I'm not worried about blades on my car as I used to own a 69 Vette with 4" side pipes. Talk about something you have to watch as you get out. Insant 2nd degree burns to unprotected skin.

kellyefields · 02-27-2011, 05:31 AM

Quote:

Originally Posted by KaienZ34

Thanks for the info, are you lowered and if so on what and how low. I'm still at stock height/suspension it's just a little lower than stock due to the 20inch rims with smaller side wall tires.

I am still at stock height. Looking to get a set of springs and a set of spacers. I need 15mm bad on the front and back.

LunaZ · 02-27-2011, 08:53 AM

Here's my opinion: (free with purchase of a**hole

)

It really depends on the overall look you're trying to achieve with the car.
By themselves, the Zele skirts get my vote for the right blend of aggressive and sleek. The EVO-R skirts are great if you want your car to have the look of a carbon fiber undertray. I don't think the Amuse would work unless you did the rest of the kit. I hate fake holes, so the IMPUL is a no.
The Stillen piece is nice, too. The Nismo pieces are a good choice if you want a factory-tuned look.

kevr6 · 02-27-2011, 09:01 AM

Quote:

Originally Posted by KaienZ34

Ok so this is not evo-r blades but the ones VIP sells, but i think that they are pretty much the same.

I believe those are Supra side blades made to fit. Someone else posted that info when VIP first put those on their car over a year ago or so.

KaienZ34 · 02-27-2011, 09:07 AM

Yeah these are the side blades from rick at VIP. I do have the full Amuse CF kit minus the wing, and was thinking it would be hot to add the CF side blades with it and the CF side mirrors and B-pillars.

EVOR · 02-28-2011, 09:34 AM

Yea, the VIP one are from FEED for Mazda RX-7. Very popular sides for RX-7.

A.J@CarbonSignal · 02-28-2011, 10:55 AM

I really like the look of both the Amuse and Nismo sides. As said before though, you need to decide what front and rear your car is going to have so you can compliment it with the sides. Mixing and matching kits is not easy.

Fire · 03-11-2011, 11:57 PM

Got my EVO-R rear diffuser and side skirts (blades). Due to limited room in my garage and crappy NY weather I wasn't able check fitment of the blades but the diffuser looks good. Is there a DIY on the sides and diffuser? Thanks EVO for your products.

Fire · 03-18-2011, 10:16 AM

Just got my sides on yesterday. Even though they look stuck out, when you look straight down from over the door they are even with the door. Here's a couple pics, including the rear diffuser and fron splitter and canards. I'm very happy.

KaienZ34 · 03-18-2011, 12:42 PM

Just me, but i'm not digging the canards.

98intrigue · 03-18-2011, 01:36 PM

Well, I'm not digging you.

EVOR · 03-18-2011, 01:42 PM

Wow nice. First install on the roadster! Great job.

SPOHN · 03-18-2011, 01:48 PM

Varis makes the best side skirts IMHO.

Fire · 03-18-2011, 02:56 PM

Thank you EVO-R I'm likin your parts. Since I took these pics I modified the sport trim pieces that mounted in the front wheel well. They look good with the blades. It only took a couple of minutes to remove most of the extra plastic. Sorry for the dirt, the whole car needs a bath. Here are the pics.

KaienZ34 · 03-18-2011, 03:17 PM

Quote:

Originally Posted by 98intrigue

Well, I'm not digging you.

Not even for a hand job back rub??

Quote:

Originally Posted by Fire

Thank you EVO-R I'm likin your parts. Since I took these pics I modified the sport trim pieces that mounted in the front wheel well. They look good with the blades. It only took a couple of minutes to remove most of the extra plastic. Sorry for the dirt, the whole car needs a bath. Here are the pics.

Now that i like, maybe i'll get the side blades and splash guard in CF. With this setup ...

02-26-2011, 11:06 PM	#61 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	I've got stock sides. As stated before I recieved stillen sides but they didn't fit. Has anyone seen any aftermarket sides on a vert? I think that there is a differance just behind the door, maybe some reinforcement for the vert. This might make any sides that replace stock ones hard to fit unless it is taken into account. I'm lowered on Eibachs a little over an inch I think. I have to measure to be sure. I'm not worried about blades on my car as I used to own a 69 Vette with 4" side pipes. Talk about something you have to watch as you get out. Insant 2nd degree burns to unprotected skin. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp Last edited by Fire; 02-26-2011 at 11:19 PM.

02-27-2011, 08:53 AM	#63 (permalink)
LunaZ A True Z Fanatic Join Date: Mar 2010 Location: Vagabond Posts: 6,704 Drives: Project: a white one Rep Power: 512	Here's my opinion: (free with purchase of ahole ) It really depends on the overall look you're trying to achieve with the car. By themselves, the Zele skirts get my vote for the right blend of aggressive and sleek. The EVO-R skirts are great if you want your car to have the look of a carbon fiber undertray. I don't think the Amuse would work unless you did the rest of the kit. I hate fake holes, so the IMPUL is a no. The Stillen piece is nice, too. The Nismo pieces are a good choice if you want a factory-tuned look. __________________ 2009 370Z Sport/Touring/Navigation \| see my journal for mods facebook: Be my friend... or not.

02-27-2011, 09:07 AM	#65 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Yeah these are the side blades from rick at VIP. I do have the full Amuse CF kit minus the wing, and was thinking it would be hot to add the CF side blades with it and the CF side mirrors and B-pillars. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

02-28-2011, 09:34 AM	#66 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 45	Yea, the VIP one are from FEED for Mazda RX-7. Very popular sides for RX-7. __________________ WWW.EVO-R.NET

03-11-2011, 11:57 PM	#68 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 43	Got my EVO-R rear diffuser and side skirts (blades). Due to limited room in my garage and crappy NY weather I wasn't able check fitment of the blades but the diffuser looks good. Is there a DIY on the sides and diffuser? Thanks EVO for your products. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

02-28-2011, 10:55 AM	#67 (permalink)
A.J@CarbonSignal Track Member Join Date: Feb 2011 Location: Dubai Posts: 581 Drives: '05 TT350z, '07 Z06 Rep Power: 16	I really like the look of both the Amuse and Nismo sides. As said before though, you need to decide what front and rear your car is going to have so you can compliment it with the sides. Mixing and matching kits is not easy.

03-18-2011, 12:42 PM	#70 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Just me, but i'm not digging the canards. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

03-18-2011, 01:36 PM	#71 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 39 Posts: 4,855 Drives: 2014 Viper Rep Power: 430	Well, I'm not digging you. __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

03-18-2011, 01:42 PM	#72 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 45	Wow nice. First install on the roadster! Great job. __________________ WWW.EVO-R.NET

03-18-2011, 01:48 PM	#73 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Varis makes the best side skirts IMHO. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EVO R CF side skirts/blades	Westwood	Exterior & Interior	52	08-08-2012 09:17 PM
Pic Request - Shine Auto Rear add-on side view with oem side skirts.	atx370z	Exterior & Interior	8	10-22-2010 11:51 AM
OEM Front bumper and side skirts	Jamaica	Parts for sale (Private Classifieds)	36	06-14-2010 02:02 AM
WTB :OEM side skirts	ejrives	Wanted	0	06-12-2010 08:33 PM
S-Tune side skirts - who has them?	Z-WHIZ	Exterior & Interior	5	11-07-2009 02:25 AM