password:jdm balanced shift knob

chops · 11-20-2010, 08:55 PM

ok, so who has one of these installed? i know quite a few of you do! am i retarded or something, because the collar will NOT screw into the knob. im waiting on a pm from thirdgearperformance but i figured id post up, maybe someone else someday will have the same issue. the threads screw in maybe once or twice then stop. i've tried everything aside from vice grips to screw this darn thing in and it wont budge! none of the threads look stripped or otherwise unusual on the collar nor the inside of the knob...am i missing something here?

see below:

ProfessorDave · 11-21-2010, 07:21 AM

I had no problem with mine. Did you try any grease or other lubricant? Can you get a picture of the threads inside the knob?

CCastro · 11-21-2010, 07:29 AM

that doesnt look like the same one as mine... the colar at least

CCastro · 11-21-2010, 05:41 PM

yea i just looked at mine my collar is not that big... i believe you have the wrong collar

chops · 11-21-2010, 07:13 PM

oh snap!! its a completely different collar. thanks ccastro!

phelan · 11-21-2010, 07:20 PM

get the right collar and you'll have no problems. enjoy, i really like the pw:jdm shift knob

XwChriswX · 11-22-2010, 01:16 AM

I wish they'd make one for 7AT's

ThirdGearPerformance · 11-22-2010, 02:24 PM

Yeah that the wrong collar and i do apologize for this. Password Sent us the wrong stuff.

PM me your # and i'll get a new one out to you.

cdawg410 · 11-22-2010, 05:12 PM

Quote:

Originally Posted by chops

ok, so who has one of these installed? i know quite a few of you do! am i retarded or something, because the collar will NOT screw into the knob. im waiting on a pm from thirdgearperformance but i figured id post up, maybe someone else someday will have the same issue. the threads screw in maybe once or twice then stop. i've tried everything aside from vice grips to screw this darn thing in and it wont budge! none of the threads look stripped or otherwise unusual on the collar nor the inside of the knob...am i missing something here?

see below:

Glad you got it worked out..... on a side note, as I have painfully learned over my 30 years of life; never ask another group of relative strangers whether or not you are retarded! Typically they'll take that opportunity to boost their own self esteem... bastards.

Gotta say I'm pretty proud of the forum members for letting that one slide.

XLR8SN · 11-22-2010, 06:31 PM

After you install it....check to see if it rattles. When I hit past 5000 RPM's...there is a rattling sound coming from the shift knob that I cant seem to locate nor get rid of.

Thanks.

XwChriswX · 11-22-2010, 07:06 PM

Quote:

Originally Posted by XLR8SN

After you install it....check to see if it rattles. When I hit past 5000 RPM's...there is a rattling sound coming from the shift knob that I cant seem to locate nor get rid of.

Thanks.

Have you tried using some thread sealer on it to see if its those two pieces?

If its not, maybe the knob is larger than the shift rod? I'd say try and get some plumbers tape and wrap it a few times to close that gap... Maybe that would help?

chops · 11-23-2010, 02:44 AM

Quote:

Originally Posted by cdawg410

Glad you got it worked out..... on a side note, as I have painfully learned over my 30 years of life; never ask another group of relative strangers whether or not you are retarded! Typically they'll take that opportunity to boost their own self esteem... bastards.

Gotta say I'm pretty proud of the forum members for letting that one slide.

i could care less if i get flamed. im here because i like to drive, and love to drive the Z.

sent you a PM with my number thirdgearperf.

ProfessorDave · 11-24-2010, 07:25 AM

Quote:

Originally Posted by XLR8SN

After you install it....check to see if it rattles. When I hit past 5000 RPM's...there is a rattling sound coming from the shift knob that I cant seem to locate nor get rid of.

Thanks.

The rattle seems to be under the shift knob, at least on mine. One of these days I'll pull the knob off and put some kind of soft washer under the boot to stop it. I think the stock knob sat a little lower, and pressed down on the washer under the openning of the boot.

XLR8SN · 11-24-2010, 01:48 PM

If people are experiencing a rattling at the upper RPM range...I think that its in the shifters design. The area right before the threaded area...is a little too narrow and lightly touches the shifter at high RPM's...I think. Not the attachment piece...the main shift knob has a small "dead" area before the threads. I think that it is somewhere in here......just cant locate it.

I have used electrical tape at the bottom....taped the threads to mitigate metal to metal contact...and it still vibrates. Took off the shift knob and floored it and I didnt hear the vibrations. So it must be in the shifter. I just cant seem to isolate it.

Hopefully someone can locate this rattling if it is indeed my shift knob.

ThirdGearPerformance · 11-24-2010, 02:14 PM

I wouldn't know what the issue was because i personally don't drive a Z, but if you guys find out what the problem is then i can get it fixed from Password.

11-20-2010, 08:55 PM	#1 (permalink)
chops A True Z Fanatic Join Date: Oct 2010 Location: NA Posts: 1,732 Drives: NA Rep Power: 22	password:jdm balanced shift knob ok, so who has one of these installed? i know quite a few of you do! am i retarded or something, because the collar will NOT screw into the knob. im waiting on a pm from thirdgearperformance but i figured id post up, maybe someone else someday will have the same issue. the threads screw in maybe once or twice then stop. i've tried everything aside from vice grips to screw this darn thing in and it wont budge! none of the threads look stripped or otherwise unusual on the collar nor the inside of the knob...am i missing something here? see below:

11-21-2010, 07:21 AM	#2 (permalink)
ProfessorDave A True Z Fanatic Join Date: Jul 2010 Location: Scranton, PA Posts: 1,580 Drives: In the fairway Rep Power: 19	I had no problem with mine. Did you try any grease or other lubricant? Can you get a picture of the threads inside the knob? __________________ Rain, snow, sleet, hail: 2009 Mazda 3 sGT HB Everything else: 2009 370z, PW Touring 6MT

11-21-2010, 07:20 PM	#6 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	get the right collar and you'll have no problems. enjoy, i really like the pw:jdm shift knob __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

11-22-2010, 01:16 AM	#7 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	I wish they'd make one for 7AT's __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

11-22-2010, 02:24 PM	#8 (permalink)
ThirdGearPerformance Base Member Join Date: Sep 2010 Location: Anaheim Posts: 213 Drives: 02 Civic SI Rep Power: 15	Yeah that the wrong collar and i do apologize for this. Password Sent us the wrong stuff. PM me your # and i'll get a new one out to you. __________________ Third Gear Performance: Cell: (909) 539-7987 ask for Jon WE WILL MATCH OR BEAT ANYONE PRICE AROUND FOR PASSWORD JDM PARTS, HID, AND LEDS!!!!

11-21-2010, 07:29 AM	#3 (permalink)
CCastro Enthusiast Member Join Date: Sep 2010 Location: SF Posts: 300 Drives: 10 Nismo MB Rep Power: 15	that doesnt look like the same one as mine... the colar at least

11-21-2010, 07:13 PM	#5 (permalink)
chops A True Z Fanatic Join Date: Oct 2010 Location: NA Posts: 1,732 Drives: NA Rep Power: 22	oh snap!! its a completely different collar. thanks ccastro!

11-22-2010, 06:31 PM	#10 (permalink)
XLR8SN Enthusiast Member Join Date: Jun 2009 Location: Hawaii Posts: 363 Drives: Nissan Rep Power: 16	After you install it....check to see if it rattles. When I hit past 5000 RPM's...there is a rattling sound coming from the shift knob that I cant seem to locate nor get rid of. Thanks.

11-24-2010, 01:48 PM	#14 (permalink)
XLR8SN Enthusiast Member Join Date: Jun 2009 Location: Hawaii Posts: 363 Drives: Nissan Rep Power: 16	If people are experiencing a rattling at the upper RPM range...I think that its in the shifters design. The area right before the threaded area...is a little too narrow and lightly touches the shifter at high RPM's...I think. Not the attachment piece...the main shift knob has a small "dead" area before the threads. I think that it is somewhere in here......just cant locate it. I have used electrical tape at the bottom....taped the threads to mitigate metal to metal contact...and it still vibrates. Took off the shift knob and floored it and I didnt hear the vibrations. So it must be in the shifter. I just cant seem to isolate it. Hopefully someone can locate this rattling if it is indeed my shift knob.

11-24-2010, 02:14 PM	#15 (permalink)
ThirdGearPerformance Base Member Join Date: Sep 2010 Location: Anaheim Posts: 213 Drives: 02 Civic SI Rep Power: 15	I wouldn't know what the issue was because i personally don't drive a Z, but if you guys find out what the problem is then i can get it fixed from Password. __________________ Third Gear Performance: Cell: (909) 539-7987 ask for Jon WE WILL MATCH OR BEAT ANYONE PRICE AROUND FOR PASSWORD JDM PARTS, HID, AND LEDS!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Password:JDM Balance Shift Knob	ThirdGearPerformance	Third Gear Performance	29	03-30-2016 03:45 AM
Password:JDM Balance Shift Knob	ThirdGearPerformance	Body Interior/Exterior	49	06-26-2012 03:00 AM
Password:JDM Delrin Shift Knob	ThirdGearPerformance	Body Interior/Exterior	5	04-28-2011 02:05 PM
WTB: Password JDM Shift Knob	M.Bonanni	Wanted	2	10-19-2010 11:19 PM
Password: JDM shift knob, feedback?	Red370	Nissan 370Z General Discussions	3	12-26-2009 08:56 PM