Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   trunk dimenssions (http://www.the370z.com/exterior-interior/2659-trunk-dimenssions.html)

kishianker 03-13-2009 02:55 AM

trunk dimenssions
 
3 Attachment(s)
I was wondering about the size of the trunk. I know that you can fit two golf bags (as seen below), but I'm not a golfer. So can any one give dimensions to this picture someone posted asking this question. I found it on one of the threads here. I hope this is not a repost I could only find one picture on this subject and no answers.
I have also made one my self (the white car) with the same dimensions just different view. Thanks

a= length of trunk
b= width of hatch opening
c= width between pillars
d= with at the widest point inside the trunk
e= maximum height floor to roof
f= minimum height floor to trunk hatch at lowest point

dboccabella 06-10-2009 05:28 PM

Trunk Size.
 
Did you ever figure this out - I have the same question.

CBRich 06-10-2009 07:36 PM

A 35.5
B 41-43
C 21
D 52
E 18
F 8

All in inches on my 370Z Base.

huoZian 08-29-2009 11:44 AM

+1 Thanks for taking the time for the measurements.

FlashBazbo 08-29-2009 11:55 AM

If you have to ask, they're too small.

If I take both wheels off my road bicycle and place the wheels in the passenger seat, the rest of the bike will fit under the hatch. Barely.

bigaudiofanat 08-29-2009 12:16 PM

Wow and than you kill like half your space when you put a sub box in there from z enclosures. But oh well.

need4speed 08-29-2009 10:34 PM

I put my wheelchair in the trunk on test drives I took. I have to take off the wheels but both wheels n frame fit snug in the trunk. I can tell that I can still fit the custom z sub box in there and can still use the cross brace. Its all about placement with my chair. But it works. Something I couldn't do with the 350z cuz the crossbrace. Was poorly placed n wouldn't come out. That's y I had bought a G35! :)
N that's y I drive automatics now as well. :(

370zlove3 03-16-2010 06:09 PM

I have a question. With the trunk cover, what would the height be?

kishianker 03-17-2010 02:06 AM

acording to my original post and CBRich response:

"a= length of trunk
b= width of hatch opening
c= width between pillars
d= with at the widest point inside the trunk
e= maximum height floor to roof
f= minimum height floor to trunk hatch at lowest point
"

"A 35.5
B 41-43
C 21
D 52
E 18
F 8
"
BTW thank You CBRich

CBRich 03-17-2010 06:16 PM

This thread is back from the grave!!!

Knewrome 04-08-2010 04:02 PM

1 Attachment(s)
Added the dimensions to one of the original images provided by kishianker...

CBRich 04-08-2010 04:50 PM

Now that's handy.

mchsueh87 05-26-2011 01:08 PM

Would this fit?
 
I am thinking about buying a folding bike. seems like a tight fit. Was wondering would this fit

Montague Bikes | 2010 SwissBike X50

Econ 05-26-2011 04:08 PM

i just fit:

(2) 20 x 8.5 wheels
(2) 20 x 10 wheels

in my Z :)

shadoquad 05-26-2011 04:17 PM

According to my standard units of measure, you can fit 3 dead hookers back there, 5 if you chop 'em up first.


All times are GMT -5. The time now is 02:50 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2