|
If you don't clay with enough lube, I clay with a foam gun much better imo, you will have residual clay left behind. This might be what you are feeling.
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
10-14-2010, 04:31 PM
|
#1 (permalink) |
|
Track Member
Join Date: May 2009
Location: Vancouver Island
Posts: 530
Drives: 2010 370Z 7AT
Rep Power: 18  |
If you don't clay with enough lube, I clay with a foam gun much better imo, you will have residual clay left behind. This might be what you are feeling. The clay bar should glide easily across the paint surface with a little pressure and never stick. This would leave rough sticky areas. If this is the case use a cleaner wax or mild polish to restore finish. As some have already told you claying will leave the surface very smooth. I alway like to use a cleaner or polish after claying. Chances are if you need to clay then it's probably time to polish as well. Good luck.
__________________
2010 Carbon Silver 370Z 7AT charcoal int. sports package | Clear Bra | Invidia Gemini CBE | CF B-Pillars | CF Fangs | CF Z emblems | Swift Springs | 20mm & 25mm Spacers | SPC Camber Arms | Brushed Aluminum shift knob |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DO i clay?? suggestions or opinions plz | g35300mm | Detailing / Washing / Waxing / Cosmetic Maintenance and Repair | 31 | 05-10-2010 01:54 PM |
| FAQ: Clay Bars & Paint Restoration | Alexus | Detailing / Washing / Waxing / Cosmetic Maintenance and Repair | 16 | 05-10-2010 11:45 AM |
| Clay Bar Virgin - cherry popped | Zdom | Detailing / Washing / Waxing / Cosmetic Maintenance and Repair | 5 | 12-01-2009 12:11 PM |
| Waxing and using clay bar | CAN-ZED | Detailing / Washing / Waxing / Cosmetic Maintenance and Repair | 3 | 07-15-2009 07:53 PM |
| FAQ: Clay Bars & Paint Restoration | Alexus | Exterior & Interior | 3 | 05-27-2009 11:43 PM |
Hybrid Mode
