Looking for ignition switch for the connection for the daytime greddy lights

balistic · 10-02-2010, 02:17 PM

any input would help

christian370z · 10-02-2010, 04:02 PM

It is vastly easier to splice into the parking light wiring and will allow the DRLs to be operated in the parking light setting and they will remain on when the headlights are on as well.

kenchan · 10-02-2010, 04:49 PM

just tap any switched fuse and run a relay if needed. how many amps do those LED's take in total?

WarmAndSCSI · 10-02-2010, 04:54 PM

Quote:

Originally Posted by kenchan

just tap any switched fuse and run a relay if needed. how many amps do those LED's take in total?

Probably like 0.5 A

But I'd like to know a good source to tap for this. I asked my wife, and this is how she wants it wired, so that's how it'll be

kenchan · 10-02-2010, 05:10 PM

lol at 0.5A you dont need a relay. just tap one of the switched fuses in the driver side (powersocket/cigarette lighter/etc), go through the firewall, through the fender. then ground your wire on the fender or something close to the lamps. should be a no brainer.

but if i was to do it i would also just tap the parking marker light and use it only at night time.

10-02-2010, 02:17 PM	#1 (permalink)
balistic Base Member Join Date: Jun 2010 Location: Jacksonville,fl Posts: 90 Drives: 09 370z sp touring Rep Power: 15	Looking for ignition switch for the connection for the daytime greddy lights any input would help

10-02-2010, 04:02 PM	#2 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	It is vastly easier to splice into the parking light wiring and will allow the DRLs to be operated in the parking light setting and they will remain on when the headlights are on as well. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Daytime Running Lights	TacoZ	Exterior & Interior	76	03-07-2015 10:01 PM
Led daytime driving lights	rhood	Exterior & Interior	81	06-12-2012 04:50 AM
US OEM Daytime Running Lights	base64	Exterior & Interior	9	07-10-2011 08:47 PM
Hyper LED Daytime Driving Lights	Asi	Exterior & Interior	13	12-03-2009 10:34 AM

10-02-2010, 04:49 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	just tap any switched fuse and run a relay if needed. how many amps do those LED's take in total?

10-02-2010, 05:10 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	lol at 0.5A you dont need a relay. just tap one of the switched fuses in the driver side (powersocket/cigarette lighter/etc), go through the firewall, through the fender. then ground your wire on the fender or something close to the lamps. should be a no brainer. but if i was to do it i would also just tap the parking marker light and use it only at night time.