7AT Shift Boot!!!

XwChriswX · 09-04-2011, 11:30 PM

Quote:

Originally Posted by nogoodname

lol taking about shift knobs is never good

nogoodname · 09-04-2011, 11:34 PM

Quote:

Originally Posted by XwChriswX

/thread killed

XwChriswX · 09-04-2011, 11:35 PM

Quote:

Originally Posted by nogoodname

/thread killed

11Thumper · 09-06-2011, 03:20 PM

Quote:

Originally Posted by Xplicit97

Ok guys so I did a little bit of trial and error on my own. So I found a guy getting rid of a 2010 Z 6spd shift boot and surround. At first I thought I could just transfer one for the other, but then I reallized there were subtle differences. Also once you tear everything down you will find that there are clearance issues with the 6spd surround. It seems the opening on the 6 speed is slightly smaller than the 7AT, and will not fit over even once you take the indicator plate off and everything. So what I found was that I needed to remove the boot from the surround. Once I did this I just placed the boot over the indicator, lined it up and popped the original surround in place. The surround will pretty much keep the boot in place. Just thought some people might like this idea, if they wanted to stick with OEM parts. Heres are a couple pics, if anyone wants anymore of the teardown I can post those as well. Im getting a MOMO knob here in a couple of days too, so I'll post pics when I do that if someone wants

I like it, but it seems as if it would look better with a shorter boot. So it just fits under the AT surround and stays in place because of the tension?

gurneyeagle · 09-07-2011, 03:55 PM

Quote:

Originally Posted by Xplicit97

Ok guys so I did a little bit of trial and error on my own. So I found a guy getting rid of a 2010 Z 6spd shift boot and surround. At first I thought I could just transfer one for the other, but then I reallized there were subtle differences. Also once you tear everything down you will find that there are clearance issues with the 6spd surround. It seems the opening on the 6 speed is slightly smaller than the 7AT, and will not fit over even once you take the indicator plate off and everything. So what I found was that I needed to remove the boot from the surround. Once I did this I just placed the boot over the indicator, lined it up and popped the original surround in place. The surround will pretty much keep the boot in place. Just thought some people might like this idea, if they wanted to stick with OEM parts. Heres are a couple pics, if anyone wants anymore of the teardown I can post those as well. Im getting a MOMO knob here in a couple of days too, so I'll post pics when I do that if someone wants

I think it looks great too.

Maybe if you trimmed the bottom some so less of it was exposed outisde the trim piece.

Either way, it's a big improvement over the cheap looking plastic gate we have now.

11Thumper · 09-08-2011, 03:23 PM

Quote:

Originally Posted by gurneyeagle

Maybe if you trimmed the bottom some so less of it was exposed outisde the trim piece.

I don't see what you mean by trimming the bottom? Might be my old eyes but I don't see anything sticking out.

somatic · 09-09-2011, 11:41 PM

So does the ring on the boot fit snugly?

KaienZ34 · 09-10-2011, 12:17 AM

Subbed!!

TMAN1985 · 09-10-2011, 06:36 AM

In for updates

tonybui · 09-11-2011, 07:24 PM

Looks gay

Xplicit97 · 09-12-2011, 12:20 PM

Trim ring fits snug, and yes you just slide the boot over the piece that has the shift indicator on it. Then you just put the silver trim ring over it. As far as cutting the boot you could but then it might not fit, I actually kinda like the bunched up look but hey to each their own

11Thumper · 09-13-2011, 02:10 AM

Quote:

Originally Posted by Xplicit97

Trim ring fits snug, and yes you just slide the boot over the piece that has the shift indicator on it. Then you just put the silver trim ring over it. As far as cutting the boot you could but then it might not fit, I actually kinda like the bunched up look but hey to each their own

Does everything fit pretty secure? No problems with the boot sliding down?

somatic · 09-13-2011, 09:43 AM

does anyone know where to get the stock boot cheap? i wanna do this

Jamaica · 09-13-2011, 01:03 PM

^eBay?

gurneyeagle · 09-16-2011, 09:40 PM

Quote:

Originally Posted by 11Thumper

I don't see what you mean by trimming the bottom? Might be my old eyes but I don't see anything sticking out.

Sorry, should have been clearer. By trimming, I meant cutting off an inch or so off the bottom to make the boot shorter, and thus not so bunched-up.

It's a big improvement over what we have now, but just a little too big. I'm anxious to see what Redline can come up with. I'm in to order a boot if they can figure out the proper fit.

09-09-2011, 11:41 PM	#52 (permalink)
somatic A True Z Fanatic Join Date: Aug 2011 Location: Grapevine, TX Posts: 1,767 Drives: 2013 GS350 Rep Power: 17	So does the ring on the boot fit snugly? __________________ Passport 9500i HW\|Short Tail Exhaust\|Evo-r CF Fangs & Fog\|Blacked Out Roof\|Status Elite Intake 19/22\|AUTO Shift Boot DIY\|GTR Button\|Rear Limo Tint\|S2carbonworks hood dampeners\|Falken Rt-7m 20"s w/Jade Project Mu Tuner Lugs\|P:JDM Oil Cap\|Tow Hook\|SOLD Last edited by somatic; 09-09-2011 at 11:45 PM.

09-11-2011, 07:24 PM	#55 (permalink)
tonybui A True Z Fanatic Join Date: May 2009 Location: Maryland Posts: 1,397 Drives: 09 Sports 6 Speed Rep Power: 427	Looks gay N1SMOZ likes this.

09-12-2011, 12:20 PM	#56 (permalink)
Xplicit97 Track Member Join Date: May 2011 Location: Bremerton, WA Age: 45 Posts: 875 Drives: 2011 Nismo 370Z Rep Power: 300	Trim ring fits snug, and yes you just slide the boot over the piece that has the shift indicator on it. Then you just put the silver trim ring over it. As far as cutting the boot you could but then it might not fit, I actually kinda like the bunched up look but hey to each their own __________________ [B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

09-13-2011, 09:43 AM	#58 (permalink)
somatic A True Z Fanatic Join Date: Aug 2011 Location: Grapevine, TX Posts: 1,767 Drives: 2013 GS350 Rep Power: 17	does anyone know where to get the stock boot cheap? i wanna do this __________________ Passport 9500i HW\|Short Tail Exhaust\|Evo-r CF Fangs & Fog\|Blacked Out Roof\|Status Elite Intake 19/22\|AUTO Shift Boot DIY\|GTR Button\|Rear Limo Tint\|S2carbonworks hood dampeners\|Falken Rt-7m 20"s w/Jade Project Mu Tuner Lugs\|P:JDM Oil Cap\|Tow Hook\|SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Shift Boot Install	E-Licious	DIY Section (Do-It-Yourself)	8	10-06-2020 12:36 PM
6mt shift knob change, new boot?	spearfish25	Exterior & Interior	19	02-03-2011 10:11 AM
New shift boot help	theDreamer	Exterior & Interior	4	01-29-2010 06:24 PM
WTB OEM Shift Boot.	Rps13.jw	Parts for sale (Private Classifieds)	0	10-09-2009 06:43 PM
Aftermarket shift knob with short throw shifter and factory boot	m4a1mustang	Exterior & Interior	18	06-09-2009 09:15 AM

09-10-2011, 12:17 AM	#53 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	Subbed!!

09-10-2011, 06:36 AM	#54 (permalink)
TMAN1985 Enthusiast Member Join Date: Aug 2011 Location: Fort Myers, FL Posts: 296 Drives: 09 Touring/Sport/Nav Rep Power: 14	In for updates

09-13-2011, 01:03 PM	#59 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	^eBay?