370Z Harness Bar

edconline · 11-30-2011, 12:09 PM

Another thread revive, any news on meridian from AU guys? I want to buy the harness bar from them but not getting any response from email, and their site says they are closing.. have I missed the boat on the only good option for a harness bar here?

jay666 · 12-03-2011, 06:30 PM

They never replied to me either. I ended up getting the one from outerpwerformance. They responded to me right away and shipped in a few weeks.

They have both a roll bar and a partial roll cage. Comes tack welded. Quality is very good.

edconline · 12-03-2011, 07:33 PM

Do you have a picture of it installed or details of where it bolts to, etc? Also I'm assuming the roll bar allows for harness mounting the same way the one from meridian did?
Thanks!

sfearl1 · 12-03-2011, 07:50 PM

jay, your links are broken

Mike · 12-03-2011, 10:37 PM

And is that name spelled correctly?

Mozen · 12-04-2011, 01:28 AM

Quote:

Originally Posted by sfearl1

jay, your links are broken

Guys ill nip this one now. The site auto censors any links from that site. For more info you will have to ask AK.

Bottom line i walked away with when i made the mistake and linked stuff from them (a while back in a similar thread) is that if they have been blocked by AK for whatever reason then their business is not worth my time. Just a heads up.

In addition their bar is part weld in part bolt in. So you weld in the supports and then the bar or cage bolts on to it. For a full weld in option you can check out some of the pictures in my profile. My cage and theirs is almost identical with the exception mine is all one-piece.

edconline · 12-04-2011, 02:33 AM

Thanks for the info, I noticed that too after tracking down the actual manufacturer. If you mouse over the link and look at the end of the garbage, you can see the manufacturer name. It does say on their site that most applications are bolt in only, requiring no welding but I can see some of the cages needing welding perhaps. The 370Z is not listed on the site, however the 350Z has the full range of products available so I assume they make them all for the 370 as well.

I have zero interest in having one custom made for me, the only option that will work for me is something pre-made, and entirely bolt in so I'm hoping that if the one from Meridian is no longer available, these guys will come thru.

Definitely need more info on it like installed pictures, whether it is entirely bolt in and price. Weight would be nice too, obviously being a roll bar and not just a harness bar it will be heavier but by how much.

sfearl1 · 12-04-2011, 11:40 AM

What effects (positve or negative) does a roll cage have on handling in our car? I had a harness bar in my last car that tied the b-pillars together and it seemed like it reduced body flex and added stiffness to the chassis. Turn-in was tighter and the car felt like it handled a lot better overall. Would this hold merit in a Z car that has a bolt-in cage?

jay666 · 12-04-2011, 02:43 PM

Quote:

Originally Posted by Mozen

Guys ill nip this one now. The site auto censors any links from that site. For more info you will have to ask AK.

Bottom line i walked away with when i made the mistake and liked stuff from them (a while back in a similar thread) is that if they have been blocked by AK for whatever reason then their business is not worth my time. Just a heads up.

In addition their bar is part weld in part bolt in. So you weld in the supports and then the bar or cage bolts on to it. For a full weld in option you can check out some of the pictures in my profile. My cage and theirs is almost identical with the exception mine is all one-piece.

Whoa, wait a sec. I learned about the Outperformance one on THIS forum, from THIS thread. Roll Cage anyone??

Now you're telling me it's crap? Under what basis.

Mike · 12-04-2011, 06:23 PM

Actually, I think he is saying that vendor may or may not be crap, but is blocked from this site, not the actual manufacturer of the part.

Mozen · 12-04-2011, 10:43 PM

Quote:

Originally Posted by Mike

Actually, I think he is saying that vendor may or may not be crap, but is blocked from this site, not the actual manufacturer of the part.

Absolutely correct. I honestly can not remember what thread i posted it in but Autopower is fine and they are reputable. However.....Outperformanceshop is not and any links to their site on the forum will be censored.

EDIT: To add to that AK had said why but ive long ago had to delete that PM in order to clear up inbox space. Sorry!

jay666 · 12-10-2011, 12:47 PM

Got it. Thanx for clearing that up.

I was going to say, the roll bar I got from them appears to be of very good quality.

For what it's worth, I had no issues in my experience buying this from Outerperformance. But, I understand how these things go.

spearfish25 · 08-04-2012, 05:01 PM

Quote:

Originally Posted by Volcom370Z

F-16s are 9G aircraft, and only in the proper configuration. You can youtube "G-LOC" to see what Gs can do to you in a sustained maneuver, but they are aren't hitting 12G... the on board computers prevent it.

What if they crash? Bam...12Gs+

sweetazzz16 · 09-22-2012, 11:19 AM

How long are the bolts that going into the shock tire brace? one forum said 8".

ChrisSlicks · 09-22-2012, 12:12 PM

Quote:

Originally Posted by sweetazzz16

How long are the bolts that going into the shock tire brace? one forum said 8".

The bolts that go through the mounting plates and hold the brace are about 8", but replacement braces do not use these bolts, instead they bolt to where the mounting plates attach on the side of the chassis. Those bolts are only about 1" long.

11-30-2011, 12:09 PM	#16 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	Another thread revive, any news on meridian from AU guys? I want to buy the harness bar from them but not getting any response from email, and their site says they are closing.. have I missed the boat on the only good option for a harness bar here? __________________ View Journal Audio Build

12-03-2011, 06:30 PM	#17 (permalink)
jay666 Base Member Join Date: Mar 2011 Location: Chicago, North Side Posts: 161 Drives: '09Nissan 370Z Nismo Rep Power: 14	They never replied to me either. I ended up getting the one from outerpwerformance. They responded to me right away and shipped in a few weeks. They have both a roll bar and a partial roll cage. Comes tack welded. Quality is very good. binary0x01 likes this.

12-03-2011, 07:33 PM	#18 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	Do you have a picture of it installed or details of where it bolts to, etc? Also I'm assuming the roll bar allows for harness mounting the same way the one from meridian did? Thanks! __________________ View Journal Audio Build Last edited by edconline; 12-03-2011 at 07:46 PM.

12-03-2011, 10:37 PM	#20 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	And is that name spelled correctly? __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

12-04-2011, 02:33 AM	#22 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	Thanks for the info, I noticed that too after tracking down the actual manufacturer. If you mouse over the link and look at the end of the garbage, you can see the manufacturer name. It does say on their site that most applications are bolt in only, requiring no welding but I can see some of the cages needing welding perhaps. The 370Z is not listed on the site, however the 350Z has the full range of products available so I assume they make them all for the 370 as well. I have zero interest in having one custom made for me, the only option that will work for me is something pre-made, and entirely bolt in so I'm hoping that if the one from Meridian is no longer available, these guys will come thru. Definitely need more info on it like installed pictures, whether it is entirely bolt in and price. Weight would be nice too, obviously being a roll bar and not just a harness bar it will be heavier but by how much. __________________ View Journal Audio Build

12-03-2011, 07:50 PM	#19 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 18	jay, your links are broken

12-04-2011, 11:40 AM	#23 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 18	What effects (positve or negative) does a roll cage have on handling in our car? I had a harness bar in my last car that tied the b-pillars together and it seemed like it reduced body flex and added stiffness to the chassis. Turn-in was tighter and the car felt like it handled a lot better overall. Would this hold merit in a Z car that has a bolt-in cage?

12-04-2011, 06:23 PM	#25 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	Actually, I think he is saying that vendor may or may not be crap, but is blocked from this site, not the actual manufacturer of the part. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

12-10-2011, 12:47 PM	#27 (permalink)
jay666 Base Member Join Date: Mar 2011 Location: Chicago, North Side Posts: 161 Drives: '09Nissan 370Z Nismo Rep Power: 14	Got it. Thanx for clearing that up. I was going to say, the roll bar I got from them appears to be of very good quality. For what it's worth, I had no issues in my experience buying this from Outerperformance. But, I understand how these things go.

09-22-2012, 11:19 AM	#29 (permalink)
sweetazzz16 Base Member Join Date: Oct 2010 Location: North Carolina Posts: 16 Drives: 2010 370z PG M6 Rep Power: 15	how long are the bolts? How long are the bolts that going into the shock tire brace? one forum said 8".

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY:REAR Fog Light install with New harness for US spec 370Z + Radar hardwire w/pics	AK370Z	DIY Section (Do-It-Yourself)	198	09-14-2019 03:11 PM
GB EOI: Z34 Coupe Harness bar	BGTV8	Exterior & Interior	6	04-10-2011 09:28 PM
Harness Mount	TrackRat	Track / Autocross / Drifting / Dragstrip	11	09-22-2010 11:45 PM
Harness ...?	HT Rambler	Audio & Video	15	06-17-2010 03:36 PM
wiring harness	510z	Audio & Video	4	04-30-2009 06:05 PM