Glove Box/Compartment...

kenchan · 09-22-2010, 11:52 AM

yah, tracing paper is too thin to work with, but if you use a regular old 8x11 letter sized paper it works pretty well.

that's how i did all the DiNoc templates.

ive had issues with my painter's tape leaving residue (i must just have a bad batch) so ive kinda stayed away from using it too much.

m4a1mustang · 09-22-2010, 11:53 AM

Were you using the orange label tape? That is the delicate surface stuff that is less likely to leave residue behind.

kenchan · 09-22-2010, 11:56 AM

no, just regular 3M painter's blue tape... for some reason the one roll i have leaves behind residue.

Slynky · 09-22-2010, 12:07 PM

Quote:

Originally Posted by kenchan

no, just regular 3M painter's blue tape... for some reason the one roll i have leaves behind residue.

Just for those who might not know, there are (at least as far as I know), two kinds of painter tape (both blue). Look at the label and you will see two differnt levels of stickiness.

wilsonp · 09-22-2010, 06:46 PM

This looks like it might be a good way to make door handle templates for DiNoc

09-22-2010, 11:53 AM	#17 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Were you using the orange label tape? That is the delicate surface stuff that is less likely to leave residue behind. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

09-22-2010, 06:46 PM	#20 (permalink)
wilsonp A True Z Fanatic Join Date: Jul 2010 Location: Virginia Posts: 1,134 Drives: 2009 Touring Sp Nav Rep Power: 17	This looks like it might be a good way to make door handle templates for DiNoc felix_aj22 likes this. __________________ 2014 Cayman S PDK Sport Chrono White/Black Was 2009 370Z Touring Sport+Nav 7AT Metallic Black/Persimmon Was 1991 NSX Auto Black/Black

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
storage compartment in dash	ZSPEED	Exterior & Interior	49	09-12-2014 12:22 PM
No glove box light?	GTRFAN	Australia/New Zealand	9	04-05-2010 01:51 AM
glove box fit	vortrex	Exterior & Interior	1	01-30-2010 03:37 PM
Fabric in the center compartment	dthem370	Exterior & Interior	10	12-18-2009 05:46 PM
Has anyone tried to fit a screen in the top compartment?	sebaztianl	Audio & Video	7	08-24-2009 09:53 PM

09-22-2010, 11:52 AM	#16 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, tracing paper is too thin to work with, but if you use a regular old 8x11 letter sized paper it works pretty well. that's how i did all the DiNoc templates. ive had issues with my painter's tape leaving residue (i must just have a bad batch) so ive kinda stayed away from using it too much.

09-22-2010, 11:56 AM	#18 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	no, just regular 3M painter's blue tape... for some reason the one roll i have leaves behind residue.