Easy & Clean Radar Install

faya · 02-08-2013, 08:56 PM

Quote:

Originally Posted by Wonka2581

Hell I know I do don't mean to but the z gets away from me lol

hell yeah!!! cheers!!

CDepp · 03-10-2013, 11:15 AM

Quote:

Originally Posted by Wonka2581

LMAO, yes as long as your not up front or by your self your good, now keep in mind their is alot of types of radar, the one I told you about and then theres ones then track first and second cars but those are really expensive and not everyone has one. and one that uses a laser called LIDAR look it up thats really expensive and you can only use it by holding it like a gun and aiming it at the vehicle you are tracking.

I don't mean to question, but doesn't your radar manufacturer state that 'popping' your radar gun is not sufficient to get an accurate reading as the gun may not read properly immediately on coming out of standby?

/thank you for your service to the community, sometimes it's a thankless job

cooltoy · 06-07-2014, 06:14 PM

Small update.

My 2014 has black/red, black/white and black/yellow wires.

Black invisicord goes to black/white, red goes to black red.

I just popped out the harness from the mirror and tapped the invisicord in. Easier to work with then trying to tap in with the wire harness still in the mirror.

MacCool · 06-15-2014, 08:24 AM

Quote:

Originally Posted by cooltoy

Small update.

My 2014 has black/red, black/white and black/yellow wires.

Black invisicord goes to black/white, red goes to black red.

I just popped out the harness from the mirror and tapped the invisicord in. Easier to work with then trying to tap in with the wire harness still in the mirror.

Just to clarify...your Homelink and auto dimming still works?

cooltoy · 06-15-2014, 08:29 AM

You bet.

aszyd · 08-06-2014, 11:37 PM

I love this place. I needed to know the correct wires to tap and boom, results on the forum!

MacCool · 01-25-2015, 10:05 AM

Quote:

Originally Posted by Wonka2581

Guys I wouldnt really throw your money away on one of these. Police have a little button on the radar that turns it on and stand by mode, When in stand by mode the detctor will not pick up the radar, but when they take it off stad by it will but by then its too late BC they already got you clocked.

With that being said each to there own, it up to you just my 2 Cents.

Radar detectors aren't foolproof. They don't guarantee you won't get pinched for speeding. All radar detectors do is give you an edge. I've had 5 Escorts or V1s since my 1980 280ZX. They have saved me countless tickets over the years. Not all of them...I've had a few...but last year alone, "Instant On" and everything, my PassPort saved me from getting two tickets, and that's about right...two tickets a year. It has MORE than paid for itself.

MacCool · 01-28-2015, 03:38 PM

Quote:

Originally Posted by swj123

Here is a Escort 8500 mounted in a weather proof box mounted under the front. I ran a 4 conductor phone wire for power and the beeper. Comes on with the ignition and there is a switch within reach to turn off the beeper. The red box is a Hammond and selected clear red so that the Laser sensor will still work. I am going to get a smaller box to make it a little lower profile. But it works good and nothing on the dash.

swj123, just out of curiosity, why are you using MY avatar which is a picture of MY car as your own avatar? Seems odd, and just a little like bad form.

cooltoy · 01-28-2015, 03:48 PM

I am sure he had no idea it was YOUR car. He just probably found a picture of a black car and used it. Now that the knows, he probably will change the pictures to someone's else car.

Joker_J · 01-28-2015, 03:59 PM

i wish there were pictures of everything! xD

jsutton2 · 01-29-2015, 04:12 PM

Do our Z's require the "micro" version? Will the standard version work?

Micro Version:
Invisicord Products

Standard Version:
Invisicord Products

Redman24 · 06-09-2015, 08:54 PM

Quote:

Originally Posted by cooltoy

Small update.

My 2014 has black/red, black/white and black/yellow wires.

Black invisicord goes to black/white, red goes to black red.

I just popped out the harness from the mirror and tapped the invisicord in. Easier to work with then trying to tap in with the wire harness still in the mirror.

Working on hook up. Point of clarification. Do you remove the black and white and black and red wires, and replace them with the new black and red wires?
If so, mine seem to be really in there very tight like they are clamped in or locked.

FYI, '14, touring/sport
Sitting in the driveway sweating bullets over this. In Houston and pretty hot.

Redman24 · 06-09-2015, 10:40 PM

Quote:

Originally Posted by Redman24

Working on hook up. Point of clarification. Do you remove the black and white and black and red wires, and replace them with the new black and red wires?
If so, mine seem to be really in there very tight like they are clamped in or locked.

FYI, '14, touring/sport
Sitting in the driveway sweating bullets over this. In Houston and pretty hot.

Done for the nite due to darkness, but some guys on the Houston Zs gave me a tip to try tomorrow. Open the connector with a key. Insert the wires together. Red and black with red in the same hole and black and white with the white wire. Snap the connector back together. Then done.
I'll add pics of this part as well.

LAVA · 06-14-2015, 04:29 PM

Does anyone know what wires to tap into for cars equipped with the OEM backup cam?

Filipe · 11-27-2016, 06:26 PM

For those of you who hardwired dash cams into your mirror using the inviscord, did you go with the fuse option?
Invisicord Products

06-07-2014, 06:14 PM	#93 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Small update. My 2014 has black/red, black/white and black/yellow wires. Black invisicord goes to black/white, red goes to black red. I just popped out the harness from the mirror and tapped the invisicord in. Easier to work with then trying to tap in with the wire harness still in the mirror. Joker_J likes this.

06-15-2014, 08:29 AM	#95 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	You bet. CDepp likes this.

08-06-2014, 11:37 PM	#96 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	I love this place. I needed to know the correct wires to tap and boom, results on the forum! __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

01-28-2015, 03:48 PM	#99 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	I am sure he had no idea it was YOUR car. He just probably found a picture of a black car and used it. Now that the knows, he probably will change the pictures to someone's else car. BeemaaZ likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

01-29-2015, 04:12 PM	#101 (permalink)
jsutton2 Base Member Join Date: Jul 2014 Location: Austin Posts: 239 Drives: 2010 370Z Sport Rep Power: 11	Do our Z's require the "micro" version? Will the standard version work? Micro Version: Invisicord Products Standard Version: Invisicord Products Joker_J likes this. __________________ 2010 Brilliant Silver 370z Sport - 08/01/2014 - And so it begins...

01-28-2015, 03:59 PM	#100 (permalink)
Joker_J Track Member Join Date: Aug 2014 Location: The Ville, KY Posts: 580 Drives: 2014 NISSAN 370Z Rep Power: 13	i wish there were pictures of everything! xD

06-14-2015, 04:29 PM	#104 (permalink)
LAVA Track Member Join Date: Nov 2014 Location: Ohio Posts: 775 Drives: AWD Q50S_3.7 Rep Power: 81	Does anyone know what wires to tap into for cars equipped with the OEM backup cam? __________________ BORLA / BERK / R2C / Z1 / Swift / NST / MOTORDYNE / OMP / H&R / EVO-R / AEROJACKET

11-27-2016, 06:26 PM	#105 (permalink)
Filipe Base Member Join Date: Dec 2015 Location: Connecticut Posts: 97 Drives: '84 Z31, '10 40th Rep Power: 9	For those of you who hardwired dash cams into your mirror using the inviscord, did you go with the fuse option? Invisicord Products

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Blinder installation and radar detector hardwire	semtex	DIY Section (Do-It-Yourself)	65	07-29-2012 08:49 PM
Where are you putting your radar detector?	LiquidZ	Nissan 370Z General Discussions	37	03-14-2012 08:12 PM
Hardwire Radar Detector	zero610	Audio & Video	7	03-04-2009 08:52 PM
Radar Detector	Jungle Prop	Nissan 370Z General Discussions	27	01-28-2009 12:53 AM
Yet another site to keep on your radar for all things Z	cstr_Cali	Nissan 370Z General Discussions	8	11-29-2008 04:15 AM