Fujimura cf Rear diffuser installed! (with pics)( AK370Z)

AK370Z · 09-01-2010, 10:10 PM

First of all, please ignore my dirty car/exhaust. I haven't washed or waxed it in a while. Seriously, the temp outside is more than 100+ EVERYDAY! Even during this install, I was sweating like a pig!

. I hate summer time

.

I'd like to thank NewYorkJon34 for creating the thread, Kenchan and 370Z JT for their very helpful DIY instructions (because the diffuser doesn't come with one!). I ALWAYS support my vendors but at the TIME the EVO-R one had some fitment issues. However, EVO-R has the new rear diffuser that's flawless and I def would've ordered EVO-R version now since it's cheaper and shipping time is much quicker (I bought mine from RHDJapan BTW and I had no problem with them. From placing order to delivered to my doorstep = exactly 23 days. However, some members DO NOT recommend that site).

Here are some pictures:

First, I took the diffuser and applied VHB tapes on it. The tape they provide is a joke. I think I used VHB 4941 which is .45 mil. You can use any one of the models. They are all VERY good. I also left it in the sun as suggested by Kenchan.

Gave it a quick polish before the install.

As you can see in this pic, the diffuser comes with small round tape and 5 bolts.

Please note, the big screw/bolt goes underneath the rear fog light. BTW, I didn't even use the other 4 bolts because the bond was SO strong (and it was 120 degrees out .) I may add the other bolts this weekend.

You have to take this clip off. It's not easy like other clips. Kinda use extra force. Mine kinda broke during process but it's fine. You throw it away anyway.

Clip is off

I first cleaned with water and then these solutions to clean the rear valence area.

Clean surface

If I you think my HKS logo is cheesy, I understand. I just put it there since putting it on the other side felt weird . I may take it off soon.

I believe Kenchan said to "double up on the top if you're using .45 tape". I did according to his instructions.

INSTALLED:

WOOT! Looks good? BTW, this is before I adjusted the exhaust tips.

Post tip adjustment.

I thought this was a cool pic . BTW, please ignore my dirty exhaust . I must polish it soon.

Far pic 1. This pic ended up being fuzzy due to being so bright outside! sorry

Same thing here .

So, I really like the product. I think it looks GREAT! It flows right in with the aggressive burnt HKS tips.

This completes my existing cf look Carbon Fiber Front Fang, B Pillars, Side Mirrors (stage 1) installed! (AK370Z) . Thank you for looking and your feedback is appreciated.

BTW, you can order the EXACT same thing from EVO-R. It's same quality, cheaper and faster shipping.

theDreamer · 09-01-2010, 10:16 PM

Hey, it is Tony's car a year ago.

Car is looking great AK, tell me about the weather, we had a "cool" front last week, 95°.

Sunsational04 · 09-01-2010, 10:19 PM

AK370Z · 09-01-2010, 10:22 PM

Quote:

Originally Posted by theDreamer

Hey, it is Tony's car a year ago.

Car is looking great AK, tell me about the weather, we had a "cool" front last week, 95°.

haha.. yeah dude, seriously F this weather!

I can't wait till the winter!

Quote:

Originally Posted by Sunsational04

Thanks.

JB-370z · 09-01-2010, 10:23 PM

Nice I like it AK

Edit: Yeah not a fan of the HKS logo.

kenchan · 09-01-2010, 10:37 PM

very nice Ak!

yep, double up the tape at the top.

keep pressing it from time to time while the tape cures.

Trips · 09-01-2010, 10:43 PM

Looks really nice Ak, and it looks pretty easy.
I don't know about the blue flip flop though?

AK370Z · 09-01-2010, 10:48 PM

Quote:

Originally Posted by kenchan

very nice Ak!

yep, double up the tape at the top.

keep pressing it from time to time while the tape cures.

Yes, I do that from time to time

Quote:

Originally Posted by JB-370z

Edit: Yeah not a fan of the HKS logo.

Says the guy with HKS logo as his avatar! haha J/K

. I know what you mean

Quote:

Originally Posted by Triple's

Looks really nice Ak, and it looks pretty easy.
I don't know about the blue flip flop though?

Thanks. lol.. it's the affect of TONY syndrome!

Well, I think the real test going to be how well it withstands the heat from the tailpipes. My tailpipes get REALLY hot! So far so good but I'll keep you guys posted.

One_Quick_Z · 09-01-2010, 10:52 PM

Looks like great fitment! Great write up/DIY

DAN

TreeSemdyZee · 09-01-2010, 11:15 PM

Dang it AK. I'm starting to feel like a mod stalker. I want.

kenchan · 09-01-2010, 11:25 PM

Quote:

Originally Posted by Triple's

I don't know about the blue flip flop though?

hahah, yah, phalen would be wearing these:

JDM driving shoes:

Ztoon · 09-01-2010, 11:49 PM

Really nice fit. Best I've seen!

OK AK, that's done now, time to cut the lawn.

EVOR · 09-02-2010, 12:41 AM

Looks great. Nice close detail install photo.

Imperial · 09-02-2010, 01:03 AM

They should make these for the Nismo.

Jquad · 09-02-2010, 01:03 AM

Nice!!! u finally got the time to install it

I got mine in 12 days

still sitting in the garage though! Nicely done AK It's a bad A$$..

09-01-2010, 10:10 PM	#1 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	Fujimura cf Rear diffuser installed! (with pics)( AK370Z) First of all, please ignore my dirty car/exhaust. I haven't washed or waxed it in a while. Seriously, the temp outside is more than 100+ EVERYDAY! Even during this install, I was sweating like a pig! . I hate summer time . I'd like to thank NewYorkJon34 for creating the thread, Kenchan and 370Z JT for their very helpful DIY instructions (because the diffuser doesn't come with one!). I ALWAYS support my vendors but at the TIME the EVO-R one had some fitment issues. However, EVO-R has the new rear diffuser that's flawless and I def would've ordered EVO-R version now since it's cheaper and shipping time is much quicker (I bought mine from RHDJapan BTW and I had no problem with them. From placing order to delivered to my doorstep = exactly 23 days. However, some members DO NOT recommend that site). Here are some pictures: First, I took the diffuser and applied VHB tapes on it. The tape they provide is a joke. I think I used VHB 4941 which is .45 mil. You can use any one of the models. They are all VERY good. I also left it in the sun as suggested by Kenchan. Gave it a quick polish before the install. As you can see in this pic, the diffuser comes with small round tape and 5 bolts. Please note, the big screw/bolt goes underneath the rear fog light. BTW, I didn't even use the other 4 bolts because the bond was SO strong (and it was 120 degrees out .) I may add the other bolts this weekend. You have to take this clip off. It's not easy like other clips. Kinda use extra force. Mine kinda broke during process but it's fine. You throw it away anyway. Clip is off I first cleaned with water and then these solutions to clean the rear valence area. Clean surface If I you think my HKS logo is cheesy, I understand. I just put it there since putting it on the other side felt weird . I may take it off soon. I believe Kenchan said to "double up on the top if you're using .45 tape". I did according to his instructions. INSTALLED: WOOT! Looks good? BTW, this is before I adjusted the exhaust tips. Post tip adjustment. I thought this was a cool pic . BTW, please ignore my dirty exhaust . I must polish it soon. Far pic 1. This pic ended up being fuzzy due to being so bright outside! sorry Same thing here . So, I really like the product. I think it looks GREAT! It flows right in with the aggressive burnt HKS tips. This completes my existing cf look Carbon Fiber Front Fang, B Pillars, Side Mirrors (stage 1) installed! (AK370Z) . Thank you for looking and your feedback is appreciated. BTW, you can order the EXACT same thing from EVO-R. It's same quality, cheaper and faster shipping. gurneyeagle, carlitos_370z, lgarcia and 3 others like this. __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

09-01-2010, 10:16 PM	#2 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Hey, it is Tony's car a year ago. Car is looking great AK, tell me about the weather, we had a "cool" front last week, 95°. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

09-01-2010, 10:23 PM	#5 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	Nice I like it AK Edit: Yeah not a fan of the HKS logo. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

09-01-2010, 10:43 PM	#7 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Looks really nice Ak, and it looks pretty easy. I don't know about the blue flip flop though? __________________

09-01-2010, 10:52 PM	#9 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 219	Looks like great fitment! Great write up/DIY DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

09-01-2010, 10:19 PM	#3 (permalink)
Sunsational04 Administrative Assistant Join Date: Oct 2008 Location: Galloway, NJ Posts: 1,937 Drives: 2019 430xi BMDUBBB Rep Power: 2684374

09-01-2010, 10:37 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	very nice Ak! yep, double up the tape at the top. keep pressing it from time to time while the tape cures.

09-01-2010, 11:15 PM	#10 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27408	Dang it AK. I'm starting to feel like a mod stalker. I want.

09-01-2010, 11:49 PM	#12 (permalink)
Ztoon Track Member Join Date: Aug 2009 Location: B.C. Posts: 578 Drives: '09 370a7 Rep Power: 25	Really nice fit. Best I've seen! OK AK, that's done now, time to cut the lawn. __________________ Stillen G3\|CBE\|ground kit, F.I. H.F.C., C.F. fangs\|mirrors\|pillars, Hotchkis, SSR Type-F, RE-11, UpRev, BC BR coilovers 15% tint, LED black hdlts, color match handles, Dynamat, tail lt. tint, Mines C.F. frt. lip\|rear spoiler, Amuse rear,skirts, vented fenders, c.f. vented hood, gloss blk. roof

09-02-2010, 12:41 AM	#13 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 45	Looks great. Nice close detail install photo. __________________ WWW.EVO-R.NET

09-02-2010, 01:03 AM	#14 (permalink)
Imperial Enthusiast Member Join Date: Aug 2010 Location: Long Beach, CA Posts: 486 Drives: 10 Nismo 370Z PW M6 Rep Power: 15	They should make these for the Nismo.

09-02-2010, 01:03 AM	#15 (permalink)
Jquad A True Z Fanatic Join Date: Apr 2010 Location: Ny Posts: 1,391 Drives: 2k10Z34Pw Rep Power: 17	Nice!!! u finally got the time to install it I got mine in 12 days still sitting in the garage though! Nicely done AK It's a bad A$$..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)	AK370Z	DIY Section (Do-It-Yourself)	254	02-14-2023 08:08 PM
Fujimura Auto Carbon Z34 Diffuser!	NewYorkJon34	Exterior & Interior	109	10-21-2012 01:10 AM
Fujimura Diffuser	Jquad	Exterior & Interior	7	08-13-2010 08:18 PM
OK, ?? Does the fujimura and Evo Rear Diffuser actually work??	Soon	Exterior & Interior	21	07-27-2010 07:43 PM
shaved the rear burger and installed shine end caps with evo-r diffuser	simota1	Exterior & Interior	44	04-28-2010 08:11 AM