Fujimura cf Rear diffuser installed! (with pics)( AK370Z)

kenchan · 09-13-2013, 12:30 PM

Quote:

Originally Posted by OldFart

I doubled up the tape along the top as you told AK to do, once it grabbed it wasn't going to let go. I can't complain at all about the fitment though, along with the price. Spats are next, already painted so just a matter of installing, but I wanted to get this on first.

sounds good. which tape did you use?

OldFart · 09-13-2013, 01:07 PM

Quote:

Originally Posted by kenchan

sounds good. which tape did you use?

I used the clear 3/4" 3m VHB, bought it off of amazon. I think I bought the 15yard version since I had the EVOR front lip, this and the spats to do..

kenchan · 09-13-2013, 03:03 PM

Quote:

Originally Posted by OldFart

I used the clear 3/4" 3m VHB, bought it off of amazon. I think I bought the 15yard version since I had the EVOR front lip, this and the spats to do..

sounds good.

that might be the same one Beemaz used.

kenchan · 09-23-2013, 07:27 PM

i suggest you guys put a dab of thread-lock blue on the mounting bolts that go on the bottom since you dont want to crank the fasteners too tight (can crack the resin).

TreeSemdyZee · 09-28-2013, 04:36 PM

Need experienced advice. I just got my car back from the bodyshop yesterday and I've had my Fujimara diffuser staring at me for one and a half months and I'm dying to install it. Should I wait for awhile and let the paint cure a bit? The bodyshop told me to wait two months before I waxed, etc.

I don't want to mess up the paint with the VHB tape, so I need advice. Either you feed my addiction or teach me patience.

Zoren 370 · 06-26-2014, 11:26 PM

Im just curious why was the thread of Evor 370z rear diffuser the link on your page 1 post is already closed?

Any of our sponsored dealers authorized distributor of fujimura rear diffusers?

speedfreek · 04-27-2015, 02:45 PM

I will be following this guide hopefully in a few weeks when my Fujimura diffuser finally shows up.

I ordered 5 yards of the 3M 5952 (0.75 inch wide) tape for the job.

Should I have ordered a different width? 0.75 in. seems to be what most everyone else has used.

Also was there any prep work to the clear coat needed? Or just install it straight out of the box?

Solid370z · 04-17-2016, 07:30 PM

How many of you actually drilled holes for the smaller screws?

acelesson · 04-17-2016, 08:29 PM

anyone have an amazon link to the tape?

Trips · 04-17-2016, 08:47 PM

Quote:

Originally Posted by acelesson

anyone have an amazon link to the tape?

https://www.amazon.com/s/ref=nb_sb_s...49%2Caps%2C204

acelesson · 04-17-2016, 09:20 PM

Quote:

Originally Posted by Trips

https://www.amazon.com/s/ref=nb_sb_s...49%2Caps%2C204

I see a lot of people here using the 3M 5952 version. what Is the difference between the 4941 and 5952?

madwi · 04-17-2016, 09:30 PM

Quote:

Originally Posted by Solid370z

How many of you actually drilled holes for the smaller screws?

I did.

acelesson · 04-24-2016, 04:23 PM

Installed mine a couple days ago. Tape should be cured by now (hopefully)

COSMO · 04-24-2016, 05:47 PM

Lose the HKS emblem and cut your grass man!!! lol

09-28-2013, 04:36 PM	#65 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,885 Drives: '09 370 & ‘14 Juke Rep Power: 27409	Need educated patience help Need experienced advice. I just got my car back from the bodyshop yesterday and I've had my Fujimara diffuser staring at me for one and a half months and I'm dying to install it. Should I wait for awhile and let the paint cure a bit? The bodyshop told me to wait two months before I waxed, etc. I don't want to mess up the paint with the VHB tape, so I need advice. Either you feed my addiction or teach me patience.

04-27-2015, 02:45 PM	#67 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 18	I will be following this guide hopefully in a few weeks when my Fujimura diffuser finally shows up. I ordered 5 yards of the 3M 5952 (0.75 inch wide) tape for the job. Should I have ordered a different width? 0.75 in. seems to be what most everyone else has used. Also was there any prep work to the clear coat needed? Or just install it straight out of the box? carlitos_370z likes this. __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

04-17-2016, 08:29 PM	#69 (permalink)
acelesson Base Member Join Date: Jul 2015 Location: Minnesota Posts: 103 Drives: 2011 Sport Rep Power: 10	anyone have an amazon link to the tape? __________________ Armytrix Exhaust / Z1 Motorsports Y-Pipe / ARK Resonated Test Pipes / Takeda Intake / PW:JDM CF Engine Dress Up / iJDMTOY LED's / Tommy Kaira Heavy Baby / Fujimura CF Rear Diffuser / Forgestar F14 / BC BR Coilovers

04-24-2016, 04:23 PM	#73 (permalink)
acelesson Base Member Join Date: Jul 2015 Location: Minnesota Posts: 103 Drives: 2011 Sport Rep Power: 10	Installed mine a couple days ago. Tape should be cured by now (hopefully) madwi likes this. __________________ Armytrix Exhaust / Z1 Motorsports Y-Pipe / ARK Resonated Test Pipes / Takeda Intake / PW:JDM CF Engine Dress Up / iJDMTOY LED's / Tommy Kaira Heavy Baby / Fujimura CF Rear Diffuser / Forgestar F14 / BC BR Coilovers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)	AK370Z	DIY Section (Do-It-Yourself)	254	02-14-2023 08:08 PM
Fujimura Auto Carbon Z34 Diffuser!	NewYorkJon34	Exterior & Interior	109	10-21-2012 01:10 AM
Fujimura Diffuser	Jquad	Exterior & Interior	7	08-13-2010 08:18 PM
OK, ?? Does the fujimura and Evo Rear Diffuser actually work??	Soon	Exterior & Interior	21	07-27-2010 07:43 PM
shaved the rear burger and installed shine end caps with evo-r diffuser	simota1	Exterior & Interior	44	04-28-2010 08:11 AM

09-23-2013, 07:27 PM	#64 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i suggest you guys put a dab of thread-lock blue on the mounting bolts that go on the bottom since you dont want to crank the fasteners too tight (can crack the resin).

06-26-2014, 11:26 PM	#66 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Im just curious why was the thread of Evor 370z rear diffuser the link on your page 1 post is already closed? Any of our sponsored dealers authorized distributor of fujimura rear diffusers?

04-17-2016, 07:30 PM	#68 (permalink)
Solid370z Base Member Join Date: Mar 2013 Location: New Jersey Posts: 102 Drives: 2011 370z Rep Power: 12	How many of you actually drilled holes for the smaller screws?

04-24-2016, 05:47 PM	#74 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Lose the HKS emblem and cut your grass man!!! lol