Fujimura cf Rear diffuser installed! (with pics)( AK370Z)

WestCo Scott

I spy a PS3 controller too, COD anyone!?

__________________
Providing you with OEM/JDM & aftermarket performance

AK370Z

dude, I have both xbox 360 and PS3 but both of them has a layer of dust on them . After working on the forum, staying social and keeping my career running, I haven't had a chance to play a video games in 15+ months!

__________________
The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post
STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q.
Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section
My Monterey Blue Z ll My Exhaust --> My Intake --> G3
Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE
Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

bigaudiofanat

I seriously will take the ps3 I want one for GTR and twisted metal.

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/

WestCo Scott

is right. With all that said I would like to say thank you for such a great forum, the excellent write ups you've done and all the time you have put in to get all of us here!

-Scott

__________________
Providing you with OEM/JDM & aftermarket performance

RICH 370Z

Really nice fit AK I will do the same as you when i have time LOL...

kenchan

Just an update on the fujimura CF diffuser... my VHB wasnt so vhb and started to sag about 3mm from the bumper
so yanked it off slowly and reapplied a different VHB tape. this time used VHB 5952.

5952 literally has almost no initial cure time... if you make a mistake, like accidentally install your diffuser up-side-down lol,
well, that's permanent.

prep... to prevent scuffs i use japanse rice paper masking tape.



VHB applied...



wiped bumper with alcohol and applied...



this is only like a minute after application. it is STUCK on there.



i applied good amount of pressure and will let it cure.

BeemaaZ

Looking good Ken!

Good thing I used 3M VHB 4910 Clear on my Fujimura diffuser + the screws that came with it. I might part out before selling the car in 2070

When installing the front lip with the same VHB, I was also surprised with the initial cure time. Only after a few seconds I could no longer seperate the lip from the front bumper. I still added 6 more locked nuts and screws to make it permanent

__________________
SoCal 40th Meet
Old & New Mods
** Steering Lock RECALL**
Own 40th 370Z? Get the build # and the Manuf. date here

Waiz

I love your attention to detail ken

kenchan

thanks, beemaz. so does the clear tape have more adhesion or??? the tape i used is still black and i saw reviews where people were using it to mount spoilers and stuff. also signs, fastener replacement, etc. this stuff is STRONG. i too used the screws that came with the fujimura.

thanks, waizzz.

TreeSemdyZee

This thread is killing me. I got my VHB tape today and the diffuser just left customs.

Hope the fitment with mine is as good as yours.

kenchan

i am sure it is, treesmedyzee. made in japan means something still.

i suggest you kind of 'practice' how you're going to pull the sides over and the bottom before you peel back the tape lining. if you just gently place it on the bumper it looks like the evor's finish picture.

you have to slightly 'stretch' it open, and let the tape tack down real nice. then the fitment is perfect.

TreeSemdyZee

Did you spray any soapy water (like they do on window tinting) to keep if from grabbing too quickly?

kenchan

i wanted full strength, so no solution. i just aligned the diffuser to my fog lamp, then pulled the ride side bottom, attached it to the bumper. then the left side bottom same thing, then along the top at the end.

at the top i used one long tape. i peeled back the liner about 2" on each side, and folded the liner outward so that i can grab and pull it off while mounting the diffuser about 4-5" at a time to the bumper.

after all the liners were off, at the very end i gave it a good push counting to 30 a section at a time. and repeated that 4-5 times. the adhesive needs to be squashed in order to become fully active.

carlitos_370z

super like brother!!! looks awesome!!!

kenchan

hey thanks, carlitos. it's a well made piece for sure. worth every penny.