Hazard switch
 

I have recently done the VSS bypass on my Nav unit. I have a temporary switch hanging out from under the center console by the drivers seat. I'd like to get a second hazard light switch and install it in the blank opposite the existing hazard switch and wire it to the VSS switch to make everything look stock. I've done some searching here and on google but I can't find anyone selling the switches. Does anyone know where I can get one?

I have the s mode and hazard switch off a 6 speed. I am not sure as far as compatability but I could send you some pics if you like.

Sure, send me a pic of it. I read somewhere that the syncro switch was a momentary switch but I don't know this for sure. I need a gate switch to work with my VSS bypass.

:worthless:

Here you are gents, pics hot off the grille... axeman, I hope you needed the SRM button and not the hazard and I just noticed that button was slightly scratched. Either way, pics are included with both. As an added bonus. I am also selling a NEW shift boot and console finisher trim. I thought I would give you guys first dibs since we are on the subject here.

http://www.the370z.com/attachment.ph...8&d=1283309605

http://www.the370z.com/attachment.ph...7&d=1283309605

http://www.the370z.com/attachment.ph...6&d=1283309605

http://www.the370z.com/attachment.ph...5&d=1283309605

Thanks specZ but after searching some other threads I'm pretty sure that the SRM button is a momentary switch and will not work for what I'm trying to do.

no problem, good luck with finding those switches!

Use the SRM switch with a relay and set it up so it only works when the engine is on and resets automatically when off :)