want to paint my own door handle's, any tips

Soon · 07-23-2010, 05:02 AM

does anyone know the steps for painting the handles flat black at home??

i figured sand,prime,wet sand, 1st coat,wet sand, two more coats?

but how do you wet sand and what sanding paper do i use, how long should they dry etc?
anybody specialize in this? wanna paint my handles this weekend..

Holliday · 07-23-2010, 09:00 AM

here is a start

DIY Removal of Door Handles

simota1 · 07-23-2010, 09:24 AM

Quote:

Originally Posted by Soon

does anyone know the steps for painting the handles flat black at home??

i figured sand,prime,wet sand, 1st coat,wet sand, two more coats?

but how do you wet sand and what sanding paper do i use, how long should they dry etc?
anybody specialize in this? wanna paint my handles this weekend..

use the DIY above...

wet sand it thoroughly with 400 grit..... after u wet sand it with 400grit you will have to prop the handle open a lil so you can shoot the inside of the handle... so that when u open the handle its black inside and not silver...

dont forget to sand in there also... wash the door handle with a mild soap... blow it dry... and then wipe it down with prep solve... shoot a plastic adhesion promotor on there....let it dry... then shoot a primer sealer on it.... i recommend a 2k urethane primer... wet sand the primer sealer then blow it dry once again.... wipe it with prep solve once again... shoot the black color on the handles or wat ever color ur going to paint the handles... DONT FORGET to leave the handles propped open so ull get the paint everywhere.... not just the outside but the inside as well... let the base coat dry then shoot a clear coat on there for protection..... depending on what finish you want... i highly recommend shooting clear on the handles.... reason being is that it goes through a beating everytime u open ur door handle... ur nails hands clothes etc.. etc... can easily scratch the paint if its not clear coated... even when its clear coated it can still chip and get scratched... but it takes more of a beating rather than just paint with no clear.... there is clear that are available in satin and even flat finishes you just have to check your local automotive paint stores if they have it.....

i think i covered everything...

remember... painting the handles isnt the more important part... prepping the pieces ur going to paint is the most important part in any painting job

take ur time and have fun bro... weekend project!!! ahah

Soon · 07-23-2010, 10:05 AM

Thanks man!

Buuut whats a prep solvent and with the wet sand
I jus dip the sand paper in water?

Thanks again
Also
How long should i wait for handles to dry inbetween coats?
Thanks man
+1

kenchan · 07-23-2010, 12:53 PM

you can use rubbing alcohol as prep solvent.

for wet sanding, if the part is small i would just do it under a running faucet in my wash basin. the purpose for wetsanding is to prevent crap from buidling up in the sand paper so that you get a consistent sanding surface. i add a dab of soap at times.

but the door handles are already painted. you shouldn't have to sand anything and just wipe it down, spray your paint.

simota1 · 07-23-2010, 02:42 PM

Quote:

Originally Posted by kenchan

you can use rubbing alcohol as prep solvent.

for wet sanding, if the part is small i would just do it under a running faucet in my wash basin. the purpose for wetsanding is to prevent crap from buidling up in the sand paper so that you get a consistent sanding surface. i add a dab of soap at times.

but the door handles are already painted. you shouldn't have to sand anything and just wipe it down, spray your paint.

what he said

thezmonster · 07-23-2010, 02:59 PM

I did sanded them with 320grit sand paper then sealed them with primer then basecoat then clear coat then sanded the clearcoat and recleared them

Soon · 07-23-2010, 05:43 PM

last ?? guys
what did you use to prop open the handle??

simota1 · 07-23-2010, 11:16 PM

u can use anything.... i actually wedged welding rods in mine LOL...

Soon · 07-24-2010, 05:03 AM

+1 everybody

07-23-2010, 05:02 AM	#1 (permalink)
Soon Base Member Join Date: Mar 2010 Location: Rockland NY Posts: 240 Drives: 2008 Cherokee SRT8 Rep Power: 16	want to paint my own door handle's, any tips does anyone know the steps for painting the handles flat black at home?? i figured sand,prime,wet sand, 1st coat,wet sand, two more coats? but how do you wet sand and what sanding paper do i use, how long should they dry etc? anybody specialize in this? wanna paint my handles this weekend.. __________________ 2009 blk 370z=SOLD Now drives... SRT!!

07-23-2010, 09:00 AM	#2 (permalink)
Holliday Track Member Join Date: Aug 2009 Location: Cache, OK Age: 38 Posts: 916 Drives: in the fast lane.... Rep Power: 17	here is a start DIY Removal of Door Handles __________________

07-23-2010, 10:05 AM	#4 (permalink)
Soon Base Member Join Date: Mar 2010 Location: Rockland NY Posts: 240 Drives: 2008 Cherokee SRT8 Rep Power: 16	Thanks man! Buuut whats a prep solvent and with the wet sand I jus dip the sand paper in water? Thanks again Also How long should i wait for handles to dry inbetween coats? Thanks man +1 __________________ 2009 blk 370z=SOLD Now drives... SRT!!

07-23-2010, 02:59 PM	#7 (permalink)
thezmonster Base Member Join Date: Aug 2009 Location: Charlotte Posts: 221 Drives: 09 Nissan 370z CB M6 Rep Power: 16	I did sanded them with 320grit sand paper then sealed them with primer then basecoat then clear coat then sanded the clearcoat and recleared them __________________ ZMONSTER!

07-23-2010, 05:43 PM	#8 (permalink)
Soon Base Member Join Date: Mar 2010 Location: Rockland NY Posts: 240 Drives: 2008 Cherokee SRT8 Rep Power: 16	last ?? guys what did you use to prop open the handle?? __________________ 2009 blk 370z=SOLD Now drives... SRT!!

07-23-2010, 12:53 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	you can use rubbing alcohol as prep solvent. for wet sanding, if the part is small i would just do it under a running faucet in my wash basin. the purpose for wetsanding is to prevent crap from buidling up in the sand paper so that you get a consistent sanding surface. i add a dab of soap at times. but the door handles are already painted. you shouldn't have to sand anything and just wipe it down, spray your paint.

07-23-2010, 11:16 PM	#9 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	u can use anything.... i actually wedged welding rods in mine LOL... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

07-24-2010, 05:03 AM	#10 (permalink)
Soon Base Member Join Date: Mar 2010 Location: Rockland NY Posts: 240 Drives: 2008 Cherokee SRT8 Rep Power: 16	+1 everybody __________________ 2009 blk 370z=SOLD Now drives... SRT!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Door Panel Removal & Door Speaker Size	jikhead	DIY Section (Do-It-Yourself)	46	07-16-2016 10:04 PM
Cleaned/polished my exhaust tips and door handles today! (Pictures inside)	AK370Z	Exterior & Interior	13	05-09-2010 02:06 AM
Car wash tips plz!!!	brakedrift12	The370Z.com Feedback, Suggestions & Questions	13	03-31-2010 09:21 AM
HELP!! Paint damaged behind door and infront of rear tires	phantom21	Nissan 370Z General Discussions	7	12-31-2009 05:46 AM
Cool Z/G tips	AK370Z	Nissan 370Z General Discussions	16	12-30-2009 01:15 PM