Swapping Stock Spoiler: Nismo vs S-tune vs other?

Jordo! · 06-30-2010, 11:06 PM

From what I understand the S-tune spoiler will require new holes to be drilled into the hatch and leave several holes from the sport package model spoiler exposed -- is this correct? How visible are they?

Also, does this same problem hold true for the OEM Nismo spoiler (i.e., NOT the S-tune one)?

Finally, are there any aftermarket spoilers that simply line up with the stock sport package spoiler holes?

Thanks!

Baker · 07-01-2010, 10:40 AM

Almost any aftermarket (even Nismo or S-Tune) will require new holes and filling so bet on that from the get go.

Jordo! · 07-01-2010, 01:23 PM

Quote:

Originally Posted by Baker Tuning

Almost any aftermarket (even Nismo or S-Tune) will require new holes and filling so bet on that from the get go.

Ergh... I wsa afraid of that... thank you for confirming. I couldn't find a clear statement of whether this applied to all available spoilers or just the S-tune.

Don't suppose anyone offers a simple soultion for the extra holes like little plugs?

Or would the old holes be so visible that plugs would look terrible?

Jamaica · 07-01-2010, 01:29 PM

Heads up. There are four screws to take out the oem spoiler. Make sure all screws are out. The oem spoiler is also has double sided tape. And then it has clips all around. To get the spoiler out you need to push foward and pull up. It was a hassle. You going to have over ten holes exposed. I haven't seen a nismo spolierinstalled but the knock off s tune should cover it up. Seibonhas kit in carbon fiber also.

Jordo! · 07-01-2010, 01:37 PM

Quote:

Originally Posted by jamaica951

Heads up. There are four screws to take out the oem spoiler. Make sure all screws are out. The oem spoiler is also has double sided tape. And then it has clips all around. To get the spoiler out you need to push foward and pull up. It was a hassle. You going to have over ten holes exposed. I haven't seen a nismo spolierinstalled but the knock off s tune should cover it up. Seibonhas kit in carbon fiber also.

Okay -- that's the kind of info I was looking for! I don't care if thre are extra holes in the hatch if they aren't exposed. I might even be able to jam a rubber plug in there to prevent water leaking in.

Also, in this thread http://www.the370z.com/nissan-370z-g...t-coupe-2.html it was mentioned that there's some sort of base for the OEM Nismo spoiler (I prefer the S-tune, but I like the Nismo one too), and that this base might cover the sport pack spoiler holes

However -- this user only has a few posts, and no updates since then

Do you know if anyone on here has installed the S-tune and found that the holes were completely covered. I couldn't find a thread on it

Or is it only the knock-off S-tune that will completely cover it? If so, is there a FRP knock off?

Hell, even 99% covered would probably be fine unless you were looking right up under it...

EDIT#1:
More confusion -- Stillen rep claims the Nismo spoiler base completely covers the sport pack wing holes

New Seibon CF Spoiler...

And this post claims the S-tune will definitely leave some holes exposed NISMO 370Z S-Tune Aero Parts available @ Z1 Motorsports

Okay... so, I'm not insane... it isn't clear and there is conflicting info on all of this.

What's the real deal -- not worried about drilling new holes -- but which wings (if any?) cover the factory holes???

Also, how much are the old holes left exposed? Also, anyone thought about developing some paint matched plugs? I've seen these used when rear wiper assemblies have been removed, for example, and they work pretty well.

EDIT#2:
Looking at the S-tune it will definitely leave two holes exposed -- the ones on either side of the rear brake light. However, two plugs if paint matched could work...

On the OEM Nismo (or a knock-off) I think it should completely cover all the holes, although new ones may need to be drilled, and a few may need to be plugged to prevent leaking, the old holes should not be exposed.

Can anyone confirm all of this?

Jamaica · 07-01-2010, 03:48 PM

yes it does cover all of the holes. I just confirmed it with one of my reps.

Jordo! · 07-01-2010, 10:29 PM

Quote:

Originally Posted by jamaica951

yes it does cover all of the holes. I just confirmed it with one of my reps.

OEM Nismo does, but not S-tune?

Jamaica · 07-02-2010, 12:46 AM

Not sure.....

Jordo! · 07-02-2010, 01:31 AM

Quote:

Originally Posted by jamaica951

Not sure.....

Well, at least based on what info I've been able to find, and careful scrutiny of photos of both, it looks like the Nismo will perfectly cover it and the S-tune will leave two holes, one on either side of the brake light.

Basically, to make the S-tune spoiler work without bodywork, we need someone to make two little paint matched plugs...

Lemers · 07-02-2010, 02:59 AM

I've been wanting to put the nismo wing on mine too, but don't want any holes showing. You would think at the very least Nissan would have made the stune spoiler to match the holes left by the sports spoiler. Likely losing sales over this issue.

jikhead · 07-02-2010, 03:17 AM

This is why i bought mine that didn't originally have the stock spoiler installed by the dealer, and had them install the s-tune one upon purchase. I think the s-tune makes the Z stand out more than the stock one. It definitely looks more sportier...

Jordo! · 07-02-2010, 05:25 AM

I prefer the S-tune over the standard Nismo, but I like that one better than the sport package spoiler...

All we really need are two little paint matched plugs tho'...

Kind of like these Keytechniqus Keyhole covers,Wiper plugs and Bumper plugs - NewCelica.org Forum

Scroll down at link to see the bumper plugs...

I could see about whether that Keytechniques guy would want to make some for those of us with the sport spoiler who want to swap to the S-tune... just a thought.

kielbasa16 · 07-02-2010, 08:38 AM

I know this may require some leg-work, but I think it could produce a win-win situation.

Swap your hatch with somebody that has a base model in your area. They get a sport wing and you have 0 holes in your hatch and are ready to install whichever spoiler you want.

Of course you need to find somebody with the same color Z and DIY would be incredibly helpful for taking off/reattaching the hatch.

Modshack · 07-02-2010, 09:51 AM

Quote:

Originally Posted by Jordo!

All we really need are two little paint matched plugs tho'...

I could see about whether that Keytechniques guy would want to make some for those of us with the sport spoiler who want to swap to the S-tune... just a thought.

You can make your own for about $2.... Pick up the plugs from the hardware drawers at Home Depot or Lowes, paint with touch up and shoot some clear. My GTI had some horrendous holes that these covered pretty well:

Also, when I replaced the spoiler on my old TT, it came with plugs...You can see them here but they were pretty unobtrusive from most angles, being under the spoiler. On the 370, those 2 on either side of the brake light are gonna be in your face..

Jordo! · 07-02-2010, 02:31 PM

^^^ Hmm. How large are the bolt holes? I can't imagine it would be all that noticeable.

And a lot less work than attempting to swap hatches or have extensive body work and paint done

06-30-2010, 11:06 PM	#1 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Swapping Stock Spoiler: Nismo vs S-tune vs other? From what I understand the S-tune spoiler will require new holes to be drilled into the hatch and leave several holes from the sport package model spoiler exposed -- is this correct? How visible are they? Also, does this same problem hold true for the OEM Nismo spoiler (i.e., NOT the S-tune one)? Finally, are there any aftermarket spoilers that simply line up with the stock sport package spoiler holes? Thanks! __________________ Enjoy it. Destroy it.

07-02-2010, 02:59 AM	#10 (permalink)
Lemers A True Z Fanatic Join Date: Mar 2010 Location: Izmir, Turkey Posts: 15,371 Drives: 2012 Traverse LTZ Rep Power: 52	I've been wanting to put the nismo wing on mine too, but don't want any holes showing. You would think at the very least Nissan would have made the stune spoiler to match the holes left by the sports spoiler. Likely losing sales over this issue. __________________ 2010 Black Cherry Touring/Sport/Nav Now - 2012 Travese LTZ until I leave for Turkey

07-02-2010, 05:25 AM	#12 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	I prefer the S-tune over the standard Nismo, but I like that one better than the sport package spoiler... All we really need are two little paint matched plugs tho'... Kind of like these Keytechniqus Keyhole covers,Wiper plugs and Bumper plugs - NewCelica.org Forum Scroll down at link to see the bumper plugs... I could see about whether that Keytechniques guy would want to make some for those of us with the sport spoiler who want to swap to the S-tune... just a thought. __________________ Enjoy it. Destroy it. Last edited by Jordo!; 07-02-2010 at 05:37 AM.

07-02-2010, 08:38 AM	#13 (permalink)
kielbasa16 Track Member Join Date: Jun 2009 Location: NY Posts: 770 Drives: 09 Blk Z Spt Rep Power: 17	I know this may require some leg-work, but I think it could produce a win-win situation. Swap your hatch with somebody that has a base model in your area. They get a sport wing and you have 0 holes in your hatch and are ready to install whichever spoiler you want. Of course you need to find somebody with the same color Z and DIY would be incredibly helpful for taking off/reattaching the hatch. __________________ Mag Black Kielbasa

07-02-2010, 02:31 PM	#15 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	^^^ Hmm. How large are the bolt holes? I can't imagine it would be all that noticeable. And a lot less work than attempting to swap hatches or have extensive body work and paint done __________________ Enjoy it. Destroy it.

07-01-2010, 10:40 AM	#2 (permalink)
Baker Enthusiast Member Join Date: Mar 2010 Location: Houston, TX Posts: 310 Drives: Top Secret 370Z Rep Power: 15	Almost any aftermarket (even Nismo or S-Tune) will require new holes and filling so bet on that from the get go.

07-01-2010, 01:29 PM	#4 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	Heads up. There are four screws to take out the oem spoiler. Make sure all screws are out. The oem spoiler is also has double sided tape. And then it has clips all around. To get the spoiler out you need to push foward and pull up. It was a hassle. You going to have over ten holes exposed. I haven't seen a nismo spolierinstalled but the knock off s tune should cover it up. Seibonhas kit in carbon fiber also.

07-01-2010, 03:48 PM	#6 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	yes it does cover all of the holes. I just confirmed it with one of my reps.

07-02-2010, 12:46 AM	#8 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	Not sure.....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo Rear and stock spoiler????	JonnieN	Nissan 370Z Photos / Spyshots / Video / Media Gallery	39	01-06-2017 02:37 PM
Swapping a base ECU with a NISMO ECU	Spartan 1771	Engine & Drivetrain	30	07-29-2013 09:00 PM
wtb nismo rear spoiler stock oem. not the aftermarket kit	tank3487	Wanted	0	05-06-2010 02:47 PM
Am I Officially the 1st w/Nismo S-Tune Spoiler?	jikhead	Exterior & Interior	15	07-19-2009 08:00 PM