Gauging interest in a harness bar

Mike · 06-26-2010, 03:22 PM

Quote:

Originally Posted by Scott @ RA

What class of PCA are you wanting to run? or tell me the requirements of what you are needing to meet as far as the harness bar/ hoop bar is concerned.
Our cages, bars, etc always meet NASA, SCCA, RLTA, riles and regulations for the perspective class we design them for. PM or e-mail me your specific class requirements and we will have NO problem meeting them.

I just want to do HPDEs, and I know they have gotten picky lately. I'm sure SCCA is good enough. Looking at their site, there are no specifics I guess, just specifics for the seat belts and seats.

Mozen · 06-26-2010, 03:34 PM

Quote:

Originally Posted by jamaica951

The amuse has mounting points on both sides.

All amuse bars ive seen installed only have 1 set of mounting points. I even asked the owners about it. They may have a new bar out with both points but even then, im thinking the angle down to the bar from the seat will be 2 low safely attach the harnesses. From what i understand the amuse bar is more for looks....BUT im getting off topic sorry Scott!

Bottom line is i want something a little more race inspired and custom yet still easy to remove if i want to...Scott can provide me both

pg6speed · 06-26-2010, 07:51 PM

Very interested. In for more info, design, and price point.

Mozen · 06-29-2010, 06:52 AM

/Bump to try and pull more interest!

Zat_Zuma · 06-29-2010, 09:03 AM

Interested but waiting for more info and price

Jamaica · 06-29-2010, 06:44 PM

Quote:

Originally Posted by Zat_Zuma

Interested but waiting for more info and price

vipor · 06-29-2010, 07:16 PM

I'd love to look into this down the line if it didn't require mangling my plastics. (Removing them is okay)

To meet these guidelines can the bar be removable or does it have to be welded?

Jamaica · 06-29-2010, 07:18 PM

Quote:

Originally Posted by vipor

I'd love to look into this down the line if it didn't require mangling my plastics. (Removing them is okay)

To meet these guidelines can the bar be removable or does it have to be welded?

good question

Mozen · 06-29-2010, 09:21 PM

Quote:

Originally Posted by jamaica951

good question

Scott is looking into creating a removable hoop/harness bar. Not sure if it will be a replacement of the interior brace bar or a separate setup similar to the autopower bolt on/ U-Weld setup. I need to call him >_< ive just been busy at work and my shift + time zone make it hard to call when anyone is awake.

LateralG'z · 06-29-2010, 09:48 PM

Count me in for very interested,

BGTV8 · 06-29-2010, 10:02 PM

PM sent

Scott @ RA · 07-02-2010, 06:24 AM

Quote:

Originally Posted by BGTV8

PM sent

pm replied to.

bullitt5897 · 07-02-2010, 11:35 AM

I would like to see a concept drawing of the design. I am interested though in a harness bar/roll cage combo.

Mozen · 07-02-2010, 09:12 PM

[QUOTE=bullitt5897;603001]I would like to see a concept drawing of the design. I am interested though in a harness bar/roll cage combo.[/QUOTE

After talking to Scott on the phone i was going to work up a couple photoshopped pics but im trying to attain another copy of photoshop from my commo guys lol. Ill get on it. Anything i work up is just a sketch tho since its going to come down to what angles Scott and the guys decide they can do once they have the car in their hands.

Scott @ RA · 07-14-2010, 02:23 AM

-UPDATE-

We are now just getting busy with the early stages of prototyping and building (plastic removal, measuring, etc.) on our four-point bolt-in cage/ harness bar.
If there is enough interest, I am contemplating also just making a harness bar that will not be a four point design, something that will just work for mounting the five and six point harness belts (without the over head rollover halo bar and rear kicker bars).

Stay tuned for more updates...... (maybe I will make another thread when I have more to share)

Just wanted to keep everyone posted

06-26-2010, 07:51 PM	#18 (permalink)
pg6speed Base Member Join Date: Jul 2009 Location: San Antonio Posts: 223 Drives: 10 Armada Rep Power: 16	Very interested. In for more info, design, and price point. __________________ STILLEN G3 / F.I. TDX (NO RESONATORS) / F.I. LTH / UpRev Tuned / BC-Racing ER Coilovers / DIY Oil Cooler / Short Shifter

06-29-2010, 09:03 AM	#20 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	Interested but waiting for more info and price __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

06-29-2010, 07:16 PM	#22 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	I'd love to look into this down the line if it didn't require mangling my plastics. (Removing them is okay) To meet these guidelines can the bar be removable or does it have to be welded? __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

06-29-2010, 09:48 PM	#25 (permalink)
LateralG'z Track Member Join Date: Nov 2009 Location: Oklahoma Posts: 876 Drives: 370z Rep Power: 17	Count me in for very interested, __________________ 2010 Mag Black, 6MT,

07-02-2010, 11:35 AM	#28 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	I would like to see a concept drawing of the design. I am interested though in a harness bar/roll cage combo. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-29-2010, 06:52 AM	#19 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 18	/Bump to try and pull more interest!

06-29-2010, 10:02 PM	#26 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,514 Drives: 09 Nissan 370Z M6 Rep Power: 39973	PM sent

07-02-2010, 09:12 PM	#29 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 18	[QUOTE=bullitt5897;603001]I would like to see a concept drawing of the design. I am interested though in a harness bar/roll cage combo.[/QUOTE After talking to Scott on the phone i was going to work up a couple photoshopped pics but im trying to attain another copy of photoshop from my commo guys lol. Ill get on it. Anything i work up is just a sketch tho since its going to come down to what angles Scott and the guys decide they can do once they have the car in their hands. __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE

07-14-2010, 02:23 AM	#30 (permalink)
Scott @ RA Enthusiast Member Join Date: Feb 2010 Location: So Cal Posts: 410 Drives: Ridiculously Fast Rep Power: 15	-UPDATE- We are now just getting busy with the early stages of prototyping and building (plastic removal, measuring, etc.) on our four-point bolt-in cage/ harness bar. If there is enough interest, I am contemplating also just making a harness bar that will not be a four point design, something that will just work for mounting the five and six point harness belts (without the over head rollover halo bar and rear kicker bars). Stay tuned for more updates...... (maybe I will make another thread when I have more to share) Just wanted to keep everyone posted cdoxp800 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gauging interest on an 07 STI in WA	get Z'd	Other Vehicle For sale	5	04-16-2010 12:00 AM
Gauging interest on new hood	Kyle@STILLEN	Exterior & Interior	16	03-09-2010 12:03 AM