EVO-R Carbon Fiber front lip - Preview Teaser

phunk · 11-10-2010, 08:39 PM

perfect... thanks for the link guys.

phunk · 11-10-2010, 08:53 PM

just ordered a Type II from the Z store for my black car. was gonna go with the type 1, but then figured the hell with it.. another 80 to have it theme with a carbon hood.

VaGntlmn · 11-10-2010, 09:28 PM

Quote:

Originally Posted by EVOR

Sorry guys, my Domain has expired. Trying to get it back. I'm in Mexico now...

How much do they want to sell it back to you?

PS - when are you going to get back to the shop? I want my lip!!

Signed,
Impatient

(mostly kidding)

js1 · 12-03-2010, 01:02 PM

is there a diy to install this front lip?

Cmike2780 · 12-03-2010, 04:36 PM

Quote:

Originally Posted by js1

is there a diy to install this front lip?

Not really, but here is a write up I made a while back.

The lip will come with a about a dozen screws and two rolls of 3m double sided time (no instructions). The the lip should be painted by a pro or with rattle can. At the very least, hit it with a can of satin black and satin clear. The paint it comes with scratched very easily.

Installing is easy, but just take your time. As with any aftermarket body parts install, test fit everything first.

-Clean the all the piece and apply double sided tape.

-Clean the bumper with some Bug & Tar remover and make sure there is no residue left over.

-Install one of the side pieces first, not the center. It should line up pretty well with the bumper's lines. Attach with just the double sided tape.

-The center piece is next. This is a key step. Peel off just enough tape
backing so you can peel it off with the center piece set flush to the bumper later on. You want to be able to adjust the center piece from side to side, so don't fully apply it to the bumper just yet.

-Have a friend hold the center piece in place while you put the other side piece on (again with just double sided tape). The side pieces will hold the center piece in place.

-Center the "center piece" so the gaps on either side are equal and peel off the rest of the tape backing.

-Step back and admire for a minute Not done yet.

-You will need to jack-up the car to put the screws in. The factory jack works fine if you do one side at a time.

-Using a 1/16" drill bit or any drill bit slightly smaller than the provided screws, carefully drill out some pilot holes into the bumper using the holes already on the lip as a guide.

-The provided screws are self tapping. Using a hand screw driver only (no power tools!) tighten until flush.

-All done, enjoy!

EVOR · 12-06-2010, 10:47 AM

Thanks for great write up. ALl lips are in stock!

NewYorkJon34 · 12-06-2010, 11:01 AM

I'm going to paint my fangs & center of the lip matte black. Has anyone else done this?

VaGntlmn · 12-19-2010, 11:59 AM

I just had my EVO-R one piece CF front lip installed.
I had it pre-painted to match the car. Almost looks stock.
Here are some pics.
Edited: 12/21/10
Added a full side profile image.

Holliday · 12-19-2010, 01:26 PM

Quote:

Originally Posted by WDRead

I just had my EVO-R one piece CF front lip installed.
I had it pre-painted to match the car. Almost looks stock.
Here are some pics.

Just curious as to why you got a CF lip and painted the entire thing?

VaGntlmn · 12-19-2010, 02:08 PM

Quote:

Originally Posted by Holliday

Just curious as to why you got a CF lip and painted the entire thing?

Cause I like the car to look stock, but not be stock.

Holliday · 12-19-2010, 02:42 PM

Quote:

Originally Posted by WDRead

Cause I like the car to look stock, but not be stock.

Yea, I understand the aftermarket stock look, but the CF is more $money$ than the standard FRP.

It would have saved you $100 bucks on the lip that could have made up for painting the lip. Still looks good though

chuckd05 · 12-19-2010, 03:00 PM

i dont understand why people leave the stock chin spoiler on when installing this.. it sticks out below the lip , looks out of place imo

lip looked good! I also agree why not just get the FPR lip if you would paint it ?

Holliday · 12-19-2010, 03:03 PM

Quote:

Originally Posted by chuckd05

i dont understand why people leave the stock chin spoiler on when installing this.. it sticks out below the lip , looks out of place imo

lip looked good! I also agree why not just get the FPR lip if you would paint it ?

I agree with you chuck, the stock chin spoiler is out of place on aftermarket front lips!

kenchan · 12-19-2010, 03:21 PM

Still can't get myself to like this lip.

Holliday · 12-19-2010, 03:23 PM

Quote:

Originally Posted by kenchan

Still can't get myself to like this lip.

You know you wanna!

11-10-2010, 08:39 PM	#901 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	perfect... thanks for the link guys. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

11-10-2010, 08:53 PM	#902 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	just ordered a Type II from the Z store for my black car. was gonna go with the type 1, but then figured the hell with it.. another 80 to have it theme with a carbon hood. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

12-06-2010, 10:47 AM	#906 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 45	Thanks for great write up. ALl lips are in stock! __________________ WWW.EVO-R.NET

12-19-2010, 03:00 PM	#912 (permalink)
chuckd05 A True Z Fanatic Join Date: Oct 2009 Location: NY Posts: 2,391 Drives: No longer a Z Rep Power: 20	i dont understand why people leave the stock chin spoiler on when installing this.. it sticks out below the lip , looks out of place imo lip looked good! I also agree why not just get the FPR lip if you would paint it ? __________________ 09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
carbon fiber front liecense area cover	darkseed	Nissan 370Z General Discussions	9	03-05-2010 07:55 AM
Carbon Fiber front fascia?	kannibul	Exterior & Interior	21	09-30-2009 02:19 AM
Sneak Peak, Carbon Fiber Front Lip, From The 370ZSOURCE!!!!	Michael@TheZStore	Exterior & Interior	31	04-19-2009 01:51 PM

12-03-2010, 01:02 PM	#904 (permalink)
js1 Track Member Join Date: Jan 2010 Location: New Jersey Posts: 794 Drives: 2009 Nissan 370z Rep Power: 16	is there a diy to install this front lip?

12-06-2010, 11:01 AM	#907 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	I'm going to paint my fangs & center of the lip matte black. Has anyone else done this?

12-19-2010, 03:21 PM	#914 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Still can't get myself to like this lip.