EVO-R Carbon Fiber front lip - Preview Teaser

370Z JT · 10-25-2010, 01:35 AM

got my CF 1 piece a long with the skirts. Will install on Friday.

370Z JT · 10-25-2010, 11:37 PM

EVOR,

What's your next innovation? CF roof cover??

doubleG370Z · 10-27-2010, 06:16 PM

does anyone know if they have these in stock? I want to know before ordering on-line...I sent a email asking this & no response yet

VaGntlmn · 10-27-2010, 07:08 PM

Supposedly the Z store has both 3-pieces in stock (all frp, and carbon center, but I haven't checked).
I'm holding out for the 1 piece cf model, which is not in stock at the moment.
Jay only said something like "won't have them for a while", but I don't know what that means.
I'm hoping for a better answer (Jay?)

EVOR · 10-29-2010, 12:35 AM

OKay Today I got 1 CF and 2 FRP black one piece lip in stock. I know its late and my flight to las vegas is tomorrow. I'll pack them up first. So if anyone wants them PM me now!

NewYorkJon34 · 10-29-2010, 07:40 AM

Hey evo-r, I got my pieces but is there anyway I could get a cf fang piece to fit with the lip?

EVOR · 10-29-2010, 08:07 AM

Quote:

Originally Posted by NewYorkJon34

Hey evo-r, I got my pieces but is there anyway I could get a cf fang piece to fit with the lip?

You need to cut the fang cover. Cuz trim the center lip will be much harder.

VaGntlmn · 10-29-2010, 10:05 AM

I just sent EVOR a PM asking for the 1 piece cf lip!!!

PapoZalsa · 10-30-2010, 08:47 PM

Here is mine but I got from a different vendor and cheaper:

NewYorkJon34 · 10-30-2010, 08:53 PM

What different vendor? It's an evo-r product unless you got it from the Z store

Cmike2780 · 11-01-2010, 08:31 PM

Some nightime pics:

Cmike2780 · 11-03-2010, 04:34 PM

Wrote this up for somebody and thought it might be helpful to others:

Installing is easy but just take your time. As with any aftermarket body parts install, test fit everything first.

-Clean the all the piece and apply double sided tape.

-Clean the bumper with some Bug & Tar remover and make sure there is no residue left over.

-Install one of the side pieces first, not the center. It should line up pretty well with the bumper's lines. Attach with just the double sided tape.

-The center piece is next. This is a key step. Peel off just enough tape
backing so you can peel it off with the center piece set flush to the bumper later on. You want to be able to adjust the center piece from side to side, so don't fully apply it to the bumper just yet.

-Have a friend hold the center piece in place while you put the other side piece on (again with just double sided tape). The side pieces will hold the center piece in place.

-Center the "center piece" so the gaps on either side are equal and peel off the rest of the tape backing.

-Step back and admire for a minute

Not done yet.

-You will need to jack-up the car to put the screws in. The factory jack works fine if you do one side at a time.

-Using a 1/16" drill bit or any drill bit slightly smaller than the provided screws, carefully drill out some pilot holes into the bumper using the holes already on the lip as a guide.

-The provided screws are self tapping. Using a hand screw driver only (no power tools!) tighten until flush.

-All done, enjoy!

kenchan · 11-03-2010, 04:41 PM

i use rubbing alcohol to remove any wax before i apply any adhesives.

also heat it very well... like ambient temps over 75F and let it cure at least 24hrs.
best if you can get the mounting surface very warm (almost hot) to the touch using the sun or IR heater/heat gun.

no water, no rain, etc. keep it dry for 24hrs.

Chris_1 · 11-03-2010, 11:31 PM

Why dont people remove the stock bottom sport lip thing< I feel like it looks odd with this lip, and I bet it would flow better if that piece wasnt their.

ddvette9 · 11-03-2010, 11:43 PM

anyone not have to paint the black side pieces. are they holding up okay?

10-25-2010, 01:35 AM	#1 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 379	got my CF 1 piece a long with the skirts. Will install on Friday. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

10-25-2010, 11:37 PM	#2 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 379	EVOR, What's your next innovation? CF roof cover?? __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

10-27-2010, 07:08 PM	#4 (permalink)
VaGntlmn Enthusiast Member Join Date: May 2010 Location: Centreville, Va Age: 64 Posts: 378 Drives: '10 Tour/Sport, 6MT Rep Power: 15	Supposedly the Z store has both 3-pieces in stock (all frp, and carbon center, but I haven't checked). I'm holding out for the 1 piece cf model, which is not in stock at the moment. Jay only said something like "won't have them for a while", but I don't know what that means. I'm hoping for a better answer (Jay?) __________________ Bill 2010 370z; Tour/Sport; 6mt; BlackCherry/Grey; 318 rwhp; 265 lbs rwtq. To view a list of my mods, click here; To view a photo journal of the mods, click here.

10-29-2010, 12:35 AM	#5 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 45	OKay Today I got 1 CF and 2 FRP black one piece lip in stock. I know its late and my flight to las vegas is tomorrow. I'll pack them up first. So if anyone wants them PM me now! __________________ WWW.EVO-R.NET

10-29-2010, 10:05 AM	#8 (permalink)
VaGntlmn Enthusiast Member Join Date: May 2010 Location: Centreville, Va Age: 64 Posts: 378 Drives: '10 Tour/Sport, 6MT Rep Power: 15	I just sent EVOR a PM asking for the 1 piece cf lip!!! __________________ Bill 2010 370z; Tour/Sport; 6mt; BlackCherry/Grey; 318 rwhp; 265 lbs rwtq. To view a list of my mods, click here; To view a photo journal of the mods, click here.

10-27-2010, 06:16 PM	#3 (permalink)
doubleG370Z Enthusiast Member Join Date: Aug 2010 Location: Vancouver Posts: 257 Drives: 09 370Z blk 7AT NAV Rep Power: 15	does anyone know if they have these in stock? I want to know before ordering on-line...I sent a email asking this & no response yet

10-29-2010, 07:40 AM	#6 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	Hey evo-r, I got my pieces but is there anyway I could get a cf fang piece to fit with the lip?

10-30-2010, 08:47 PM	#9 (permalink)
PapoZalsa A True Z Fanatic Join Date: Nov 2009 Location: Not in Sunny Florida Posts: 6,358 Drives: 16 Nismo w/Tech Pack Rep Power: 4500	Here is mine but I got from a different vendor and cheaper: __________________ 2009 370Z MB Base w/Sport Package 6MT Modshack's Custom Air Intakes /3M Clear Bra/ Illuminated Kick Plates / F. I CBE w/12" resonators / EVO-R Front Lip / Rear Hatch Wing / Tein S-Tech Springs /Ilegal Tint in the Rep. of VA/4x20mm Z1 Spacers/ Vinyl Roof/Liquid Carbon Designs Last edited by PapoZalsa; 10-30-2010 at 08:50 PM.

10-30-2010, 08:53 PM	#10 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	What different vendor? It's an evo-r product unless you got it from the Z store

11-01-2010, 08:31 PM	#11 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 29	Some nightime pics: __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

11-03-2010, 04:34 PM	#12 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 29	Wrote this up for somebody and thought it might be helpful to others: Installing is easy but just take your time. As with any aftermarket body parts install, test fit everything first. -Clean the all the piece and apply double sided tape. -Clean the bumper with some Bug & Tar remover and make sure there is no residue left over. -Install one of the side pieces first, not the center. It should line up pretty well with the bumper's lines. Attach with just the double sided tape. -The center piece is next. This is a key step. Peel off just enough tape backing so you can peel it off with the center piece set flush to the bumper later on. You want to be able to adjust the center piece from side to side, so don't fully apply it to the bumper just yet. -Have a friend hold the center piece in place while you put the other side piece on (again with just double sided tape). The side pieces will hold the center piece in place. -Center the "center piece" so the gaps on either side are equal and peel off the rest of the tape backing. -Step back and admire for a minute Not done yet. -You will need to jack-up the car to put the screws in. The factory jack works fine if you do one side at a time. -Using a 1/16" drill bit or any drill bit slightly smaller than the provided screws, carefully drill out some pilot holes into the bumper using the holes already on the lip as a guide. -The provided screws are self tapping. Using a hand screw driver only (no power tools!) tighten until flush. -All done, enjoy! __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

11-03-2010, 04:41 PM	#13 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i use rubbing alcohol to remove any wax before i apply any adhesives. also heat it very well... like ambient temps over 75F and let it cure at least 24hrs. best if you can get the mounting surface very warm (almost hot) to the touch using the sun or IR heater/heat gun. no water, no rain, etc. keep it dry for 24hrs.

11-03-2010, 11:31 PM	#14 (permalink)
Chris_1 Track Member Join Date: Mar 2010 Location: Statewide Posts: 838 Drives: Nissan 370Z Roadster Rep Power: 16	Why dont people remove the stock bottom sport lip thing< I feel like it looks odd with this lip, and I bet it would flow better if that piece wasnt their.

11-03-2010, 11:43 PM	#15 (permalink)
ddvette9 Track Member Join Date: May 2009 Location: Florida Posts: 823 Drives: 2013 Scion FRS Rep Power: 17	anyone not have to paint the black side pieces. are they holding up okay?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
carbon fiber front liecense area cover	darkseed	Nissan 370Z General Discussions	9	03-05-2010 06:55 AM
Carbon Fiber front fascia?	kannibul	Exterior & Interior	21	09-30-2009 01:19 AM
Sneak Peak, Carbon Fiber Front Lip, From The 370ZSOURCE!!!!	Michael@TheZStore	Exterior & Interior	31	04-19-2009 12:51 PM