Fujimura Auto Carbon Z34 Diffuser!

Knives · 07-14-2010, 09:03 PM

Quote:

Originally Posted by kenchan

Yep!

it's probably not necessary but good to use the best.

Agreed.

Going to order the tape now actually. Don't think I can let the tape sit for anything more than 48 hours or so due to work, as opposed to the 72 maximum curing hours. Should be enough though. Hopefully.

kenchan · 07-14-2010, 09:30 PM

Yah, just don't get it wet and push on the diffuser from time to time to ensure contact. Nothing special.

370Z JT · 07-14-2010, 09:35 PM

I redid mine with VHB tape and the hold is a lot stronger than the supplied tape.

NewYorkJon34 · 07-14-2010, 09:40 PM

Doesn't it come with screws that go under the car to help support it?

kenchan · 07-14-2010, 09:49 PM

Quote:

Originally Posted by NewYorkJon34

Doesn't it come with screws that go under the car to help support it?

It does, but it can't support the entire weight of it. I think the bolts are there to prevent air from sheering the diffuser off from the bottom.

370Z JT · 07-14-2010, 09:50 PM

^comes with 5 torq screws bolts washers.

Jquad · 07-24-2010, 08:08 AM

Quote:

Originally Posted by 370Z JT

I redid mine with VHB tape and the hold is a lot stronger than the supplied tape.

which tape did you end up getting? the 5952?

kenchan · 08-04-2010, 07:18 AM

Bumping thread for AK. I got the VHB tape from ULine. I think one of the picts have a roll of it.

I used probably 10-12ft of the roll.

The reason why I did not buy from one of the cheap vendors on ebay is because some of them would not warrant the quality. I think they were old and past their shelf life.

jlaughman22 · 08-04-2010, 04:37 PM

Anyone know if there's a fit issue going over aftermarket exhausts? I have the HKS and from the pics its looks close, though I am looking @ this on my BB anyone confirm ?

NewYorkJon34 · 08-04-2010, 04:58 PM

Quote:

Originally Posted by jlaughman22

Anyone know if there's a fit issue going over aftermarket exhausts? I have the HKS and from the pics its looks close, though I am looking @ this on my BB anyone confirm ?

I have the F.I. exhaust and was thinking the same thing.

kenchan · 08-04-2010, 05:28 PM

you know you can add spacers to the hanger brackets to lower the exhaust...?

my fujimura muffler was 3mm from the CF when i installed it. added 3mm bushings (6pcs) and got 7-8mm clearance.

NewYorkJon34 · 08-04-2010, 07:10 PM

I had to add the spacers already, I am pretty sure I'll be alright.

kenchan · 08-04-2010, 08:52 PM

Just add more as needed. Should be no issue.

Knives · 09-06-2010, 03:24 PM

Had the diffuser sitting on my floor for a couple of weeks. Decided to not be lazy yesterday and finally put it on. Quick writeup and some pics below.

Pretty easy install. I used 3M VHB 4910 tape (the tape they give you is a joke). I mostly put the tape along the outer edges of the diffuser. Per Kenchan's suggestion, I let the tape settle to the diffuser in the sun before install. While that sat, I went to work removing the factory plastic clip under the read fog light. It honestly looks like an unassuming plastic clip, but don't be fooled, its a pain in the @ss. You need to use some force and good positioning. Once that was off, I carefully put on the diffuser (you don't want to be off and have to constantly adjust because the tape will stick fairly quickly). I screwed in the center with the screw and bolt they provided. I used my own black self-drilling screws for the sides, instead of the flat-point screws they provided.

Overall, I'm pretty pleased. Fitment and carbon fiber quality are pretty good. Letting the diffuser sit until work tomorrow morning to let the 3M tape cure. Anyway, posted some pics below. Oh, and I have the F.I. exhaust and it is a tight fit (maybe 2 millimeters) but there is no contact.

370Z JT · 09-06-2010, 03:39 PM

^pretty sick man. I like the CF wing. Saving the loot.

07-14-2010, 09:35 PM	#78 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	I redid mine with VHB tape and the hold is a lot stronger than the supplied tape. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

07-14-2010, 09:50 PM	#81 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	^comes with 5 torq screws bolts washers. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

09-06-2010, 03:39 PM	#90 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	^pretty sick man. I like the CF wing. Saving the loot. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujimura lip	Junior370z	Exterior & Interior	22	12-30-2010 08:32 AM
Fujimura Auto 370Z Exhaust	AK370Z	Intake/Exhaust	12	07-15-2010 01:08 PM
Yellow 370Z from Fujimura auto / SSR Type C	The_Zed_car	Nissan 370Z General Discussions	3	06-25-2009 11:55 PM
Fujimura Auto 370z aero kit 4.24.09	AK370Z	Exterior & Interior	13	05-25-2009 10:07 PM
Fujimura Auto 370z Plan Full Aero Kit 01.04.09	AK370Z	Exterior & Interior	9	01-05-2009 02:49 AM

07-14-2010, 09:30 PM	#77 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Yah, just don't get it wet and push on the diffuser from time to time to ensure contact. Nothing special.

07-14-2010, 09:40 PM	#79 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	Doesn't it come with screws that go under the car to help support it?

08-04-2010, 07:18 AM	#83 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Bumping thread for AK. I got the VHB tape from ULine. I think one of the picts have a roll of it. I used probably 10-12ft of the roll. The reason why I did not buy from one of the cheap vendors on ebay is because some of them would not warrant the quality. I think they were old and past their shelf life.

08-04-2010, 04:37 PM	#84 (permalink)
jlaughman22 Base Member Join Date: May 2010 Location: the bay Posts: 61 Drives: 2010 z Rep Power: 15	Anyone know if there's a fit issue going over aftermarket exhausts? I have the HKS and from the pics its looks close, though I am looking @ this on my BB anyone confirm ?

08-04-2010, 05:28 PM	#86 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	you know you can add spacers to the hanger brackets to lower the exhaust...? my fujimura muffler was 3mm from the CF when i installed it. added 3mm bushings (6pcs) and got 7-8mm clearance.

08-04-2010, 07:10 PM	#87 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	I had to add the spacers already, I am pretty sure I'll be alright.

08-04-2010, 08:52 PM	#88 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Just add more as needed. Should be no issue.