Disappearing Phone and GPS holder..(version 2)...>

JakeZ34 · 11-29-2010, 02:34 AM

Quote:

Originally Posted by kenchan

btw, i only removed the shift trim and the decorative kick plate thingie in order to hardwire it to the 12v power socket wiring. i made a 1/2" hole in the cubby and snaked the wire through. finished off the hole with a grommet and black EZ felt for a OEM look.

didnt remove the entire cubby out... that would be too much work.

Hey Kenchen I can't seem to privately message you so I'm going to post this here, what are the parts needed to make this holder? Can you do a quick DIY or maybe just explain it to me because I bought a Garmin and like the idea of this mod.

kenchan · 11-29-2010, 02:35 PM

Quote:

Originally Posted by JakeZ34

Hey Kenchen I can't seem to privately message you so I'm going to post this here, what are the parts needed to make this holder? Can you do a quick DIY or maybe just explain it to me because I bought a Garmin and like the idea of this mod.

hey jake- yah, ive turned off PM cause i get too many newb crybabies sending me waaaa waaaa

messages when i post some joke about them.

as for the bracket you can basically use any metal strip and bend it into shape. I used a small hinge like the one modshack used (can be had at art stores) and a tapping screw.

For the ball joint i cut off the arm from the garmin suction cup holder and screwed 3-4 small tapping screws throught the bracket. i think amazon sells just the ball joint with adhesive so you might want to run a search over there.

the joint is pretty tight so you'll probably need to reinforce the adhesive with screws.

at the end i wrapped the bracket with DiNoc CF wrap. looks very clean.

GL!

kenchan · 11-29-2010, 02:37 PM

check out post #15 for picts.

JakeZ34 · 11-29-2010, 10:49 PM

Quote:

Originally Posted by kenchan

check out post #15 for picts.

ty very much. I'll post more questions as I am a noob when it comes to this.....

JakeZ34 · 12-06-2010, 10:51 PM

Kenchan where did you get that metal piece from? I looked all over Home Depot and Lowes and couldn't find anything like that.

kenchan · 12-07-2010, 06:51 AM

Try your local hobby store. They sell metal strips by balsawood.

kenchan · 10-30-2011, 07:50 PM

bigdog- here's the final dinoc wrapped version.

urvokbm · 11-01-2011, 08:49 AM

GREAT DIY! unfortunately for me, I'm not much of a diy'er when it comes to projects like this.

modshack or kenchan, if one of you have the time could you recreate this piece for me? I'd like to have one that will hold my iPhone4s and I will gladly pay top dollar for your help. if one of you wouldn't mind helping me out shoot me a PM and I'll send some funds your way. thanks!

kenchan · 05-14-2012, 11:02 AM

just a recent update on my new 5" nuvi and OBD2 bt ecoroute running.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
the370Z.com License Plate Holder???	flashburn	The370Z.com Feedback, Suggestions & Questions	30	05-02-2010 09:59 PM
scratched cup holder chrome	dudafunk	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	10	03-08-2010 08:53 PM
Front License Plate tow-hook holder	Spartan 1771	Exterior & Interior	21	01-19-2010 06:46 PM
Need rear license plate holder advice...	Diversion	Exterior & Interior	14	05-29-2009 02:12 PM
Tow Hook License Plate Holder No Drilling	YamahaR6	Exterior & Interior	5	03-31-2009 03:02 PM

11-29-2010, 02:37 PM	#33 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	check out post #15 for picts.

12-06-2010, 10:51 PM	#35 (permalink)
JakeZ34 Enthusiast Member Join Date: Oct 2009 Location: Huntington Beach Posts: 436 Drives: BS 370z 6MT/sprt pkg Rep Power: 198	Kenchan where did you get that metal piece from? I looked all over Home Depot and Lowes and couldn't find anything like that.

12-07-2010, 06:51 AM	#36 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Try your local hobby store. They sell metal strips by balsawood.

10-30-2011, 07:50 PM	#37 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	bigdog- here's the final dinoc wrapped version.

11-01-2011, 08:49 AM	#38 (permalink)
urvokbm Base Member Join Date: Jun 2011 Location: West Palm Beach, FL Posts: 67 Drives: 09 MB 6mt Rep Power: 0	GREAT DIY! unfortunately for me, I'm not much of a diy'er when it comes to projects like this. modshack or kenchan, if one of you have the time could you recreate this piece for me? I'd like to have one that will hold my iPhone4s and I will gladly pay top dollar for your help. if one of you wouldn't mind helping me out shoot me a PM and I'll send some funds your way. thanks!

05-14-2012, 11:02 AM	#39 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	just a recent update on my new 5" nuvi and OBD2 bt ecoroute running.