stillen front canard and splitter

m4a1mustang · 05-04-2010, 07:41 PM

Quote:

Originally Posted by chuckd05

I have went ahead and ordered the front splitter ( or Lip )

The canards are not my cup of tea but I am a fan of the lip for sure..

I am going to take pictures of it on my car unpainted and installed and than paint matched to my PW and installed...

Knives · 05-04-2010, 07:42 PM

Quote:

Originally Posted by theDreamer

Double sided tape & 6 (3 each side) self taping screws.

Gotcha. Was gonna say, no way only tape was holding those down.

Quote:

Originally Posted by NewYorkJon34

I suppose your right, but to me it would be like driving with a huge functional wing. Sure it helps, but looks pretty funny (rice-ish). If that makes sense, lol

Haha, I hear you. Kinda wish functional aero upgrades (canards, wings, splitters) didn't get the bad wrap because a couple of 90hp Civic DX's in the 1990's decided to put them on.

m4a1mustang · 05-04-2010, 07:46 PM

Quote:

Originally Posted by Knives

Gotcha. Was gonna say, no way only tape was holding those down.

Haha, I hear you. Kinda wish functional aero upgrades (canards, wings, splitters) didn't get the bad wrap because a couple of 90hp Civic DX's in the 1990's decided to put them on.

I don't really think that's the problem. Any car guy can tell the difference between a pep-boys ricer wing and a functional race wing. It just looks "wrong" on a street car, IMO. Wings and crazy vents and other aero bits as well as graphics and decals belong on the track... a cleaner look is more "appropriate" for the street.

This, of course, is all my personal opinion.

m4a1mustang · 05-04-2010, 07:53 PM

Someone from Stillen needs to get in here and post more pictures! I know they have them!!!!

Knives · 05-04-2010, 07:56 PM

Quote:

Originally Posted by m4a1mustang

I don't really think that's the problem. Any car guy can tell the difference between a pep-boys ricer wing and a functional race wing. It just looks "wrong" on a street car, IMO. Wings and crazy vents and other aero bits as well as graphics and decals belong on the track... a cleaner look is more "appropriate" for the street.

This, of course, is all my personal opinion.

I certainly see that point. And I'm not down with people putting on canards and wings who never see a track. I was just saying, people who track their daily drivers shouldn't have to put up with being lumped into the "ricer" category when they are doing it for a functional purpose. Hard to remove a wing and canards during the weekdays unless you want to drive around with holes in your car. But, I guess we differ there. And that's cool.

Mike · 05-04-2010, 08:35 PM

Quote:

Originally Posted by Knives

I certainly see that point. And I'm not down with people putting on canards and wings who never see a track. I was just saying, people who track their daily drivers shouldn't have to put up with being lumped into the "ricer" category when they are doing it for a functional purpose. Hard to remove a wing and canards during the weekdays unless you want to drive around with holes in your car. But, I guess we differ there. And that's cool.

thank you!

m4a1mustang · 05-04-2010, 09:14 PM

Quote:

Originally Posted by Knives

I certainly see that point. And I'm not down with people putting on canards and wings who never see a track. I was just saying, people who track their daily drivers shouldn't have to put up with being lumped into the "ricer" category when they are doing it for a functional purpose. Hard to remove a wing and canards during the weekdays unless you want to drive around with holes in your car. But, I guess we differ there. And that's cool.

It's really no big deal. You'd have to be a major d-bag to go up to a guy like Mike and tell him he's a ricer because he runs a functional race wing on a car that sees the track a lot. I sure as hell wouldn't think that.

And usually it's pretty easy to tell who's real and who's not. If I ever saw a hellaflush car with a huge track wing on it'd be pretty obvious that it's all show.

SophiaZ · 05-04-2010, 09:18 PM

What is the purpose of these?!!!! They look cool, but don't look like a performance mod

m4a1mustang · 05-04-2010, 09:19 PM

Quote:

Originally Posted by SophiaZ

What is the purpose of these?!!!! They look cool, but don't look like a performance mod

Oh they are very much a performance mod... granted you don't see the benefit driving around town. But for a car that sees track time, the front splitter and canards generate down force for added grip.

NewYorkJon34 · 05-04-2010, 10:33 PM

Quote:

Originally Posted by chuckd05

I have went ahead and ordered the front splitter ( or Lip )

The canards are not my cup of tea but I am a fan of the lip for sure..

I am going to take pictures of it on my car unpainted and installed and than paint matched to my PW and installed...

As far as the material, with as low as this car sits, I would not consider any fiberglass lip. I have no problems with urethane constuction. I am lowered on eibachs so I am a touch concerned with driveways n such but I dont think I wont be able to manage.

I def want to see pics of that, maybe even black out the fangs & the middle section of the lip.

teejnut · 05-05-2010, 12:56 AM

For the track guys, I wonder how functional both of these mods are. Hopefully someone from Stillen can chime in. Also, any under pics of the splitter and how does it attach to the car?

m4a1mustang · 05-05-2010, 07:33 AM

Quote:

Originally Posted by teejnut

For the track guys, I wonder how functional both of these mods are. Hopefully someone from Stillen can chime in. Also, any under pics of the splitter and how does it attach to the car?

They should be pretty functional. The splitter is nice and flat, which is important, and the canards are plenty large enough to catch enough air.

Bster · 05-06-2010, 12:07 AM

It looks kinda round... I'd prefer something more angular to match with the lines of the car...

Ricochet48 · 05-06-2010, 02:39 PM

I would love to see these if CF on a white Z with the EVOR (sp?) CF fang overlay. That would be very aggressive looking imo.

kannibul · 05-06-2010, 03:54 PM

Quote:

Originally Posted by chuckd05

I was just looking on Stillen's website and came across the product.. Front Canard and Splitters...

Ill post a picture in a second but the Lip is actualy really nice and I havent seen it or atleast I dont think I have..

Does anyone have it, and any other pics from different angles than the picture they provide ?

Its priced nicely too.

Put a tophat on it and you have this:

05-04-2010, 07:53 PM	#34 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6963	Someone from Stillen needs to get in here and post more pictures! I know they have them!!!! __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

05-05-2010, 12:56 AM	#41 (permalink)
teejnut Base Member Join Date: Sep 2009 Location: Burbank, CA Posts: 206 Drives: 09 Z34 Sport/6MT Rep Power: 16	For the track guys, I wonder how functional both of these mods are. Hopefully someone from Stillen can chime in. Also, any under pics of the splitter and how does it attach to the car? __________________ \|KW v3\|SSR Type F\|Invidia\|Berk\|Stillen\|Kenwood/Focal/Image Dynamics/Alpine\|

05-06-2010, 12:07 AM	#43 (permalink)
Bster Base Member Join Date: Feb 2009 Location: Singapore Posts: 174 Drives: '09 PW Z34 Manual Rep Power: 17	It looks kinda round... I'd prefer something more angular to match with the lines of the car... __________________ TEIN Monoflex with EDFC \| H&R 20mm Spacer \| SPC Rear Camber \| HKS Hi-Power \| Berks High Flow Cat \| Stillen G3 \| EVO R Rear Diffuser \| Blacked out headlights \| Z1 34Row Cooler \| Z1 SS Brake lines

05-06-2010, 02:39 PM	#44 (permalink)
Ricochet48 Base Member Join Date: Dec 2008 Location: Darien, IL Posts: 117 Drives: 06 Acura RSX Type S Rep Power: 17	I would love to see these if CF on a white Z with the EVOR (sp?) CF fang overlay. That would be very aggressive looking imo. __________________ I feel like some RWD and torque!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front Lip Sale - Ings +1 and JP USA Front Spoilers Now Available!!	DriveLineEric	Body Interior/Exterior	101	08-20-2014 12:07 AM
Intere thread: STILLEN front lip spoiler	Kyle@STILLEN	Exterior & Interior	82	11-22-2010 11:43 PM
Front Bumper / Front Vents / Aerodynamical goodies	SpawnAeroJohn	Exterior & Interior	94	01-24-2010 07:27 AM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 06:20 PM

05-04-2010, 09:18 PM	#38 (permalink)
SophiaZ A True Z Fanatic Join Date: Dec 2009 Location: South Jersey Posts: 1,463 Drives: 2020 50th anniv 7AT Rep Power: 6733	What is the purpose of these?!!!! They look cool, but don't look like a performance mod