Oh snap, Carbon fiber rear hatch dampners...
 

:ughdance:~FRONTS AND REARS NOW FOR SALE~:ughdance:


check these out guys. Real carbon fiber hatch dampners....
Before:
http://i57.photobucket.com/albums/g2...6/DSCN2567.jpg
After:
http://i57.photobucket.com/albums/g2...6/DSCN2571.jpg
http://i57.photobucket.com/albums/g2...6/DSCN2568.jpg

you can find these on the link below:
Carbon Fiber Hood Damper Kit - hood dampeners made from Carbon fiber. fits Mazda, Honda,Subaru,Mini cooper, G35 Nissan 350Z,Mitsubishi Evo, Gallardo and more

Found a coupon code also= 370z

Also Nismo valve stem caps here: Carbon Fiber Valve stem caps-Nismo 100% real carbon fiber valve stem caps

Ryan

wrong side of the car. we want HOOD DAMPERS!

Im working on those! lol ;p

so its just an aftermarket regular shock wrapped in carbon fiber? naaaaaa

nope its not. we supply and make everything

:tup:

We are actually fitting the front today. ill keep you updated :happydance:

subscribed. :D

interesting..

Can you adjust the spring rates on those dampeners for those of us who have CF hatches?

he's busy on the hood dampers. leave him alone! :D

Sweet!! And someone from Tampa at that!! If you get the fronts going without damaging the hood .. you have your first order (will pick up in person) today!!

I will order both as soon as the fronts are availible.

Very cool any idea on pricing?

sorry you cant make adjustments but i dont see it being an issue for you.

Ryan

We are looking at $99 a set. But there is a coupon :)

Coupon= 370z

planning on becoming a forum vendor?

In for hood struts if you can guarantee no chance of damaging the aluminum hood.

Yes we are becoming a vendor. Already talked to AK.

cool :tup:

In for more results on this.
Been looking for some solid, do not screw up my hood, hood struts. Talking to a local shop here currently, but not 100% sure they can do it, they do more tuning/wrench tuning.

quick DIY too please for the hood dampers. :p

hope it's as easy as the ones for the G35C's...i installed a set on mine and it's been very good.

Ya a diy would be a forsure, this would help sell more of these little guy's than anything!

uhm...if you use the factory specs on a carbon hood, the weight difference is enough that it'll push the hatch up and create a small gap.

hmm... not sure then. right now we are only fitting these to the stock hood.

phalen, enough already. go change your avatar or something. :D

Sorry for the car being so dirty guys. here is the Front :)

one thing we ran into. The rub molding that runs along the side of the fender was cut. Now i imagine some of you fanatics wont want that so cutting a little section out shouldnt be to bad. As others might just toss the rubber. Its up to you ;p

Id say the install would take roughly 15-20 min. always helps to have a buddy hold the hood while installing the dampers.

Dampers are held on with a ball joint, and the secured with a pop pin. I raised and lowered the hood about 2 trillion times to insure quality. We havent had any dampers come back for bad quality.

Ask all the questions you need to, im here!

Ryan
Prosport Gauges, Inc

http://i57.photobucket.com/albums/g2...6/DSCN2572.jpg
http://i57.photobucket.com/albums/g2...6/DSCN2580.jpg
http://i57.photobucket.com/albums/g2...CN2575copy.jpg
http://i57.photobucket.com/albums/g2...CN2576copy.jpg
http://i57.photobucket.com/albums/g2...CN2577copy.jpg
http://i57.photobucket.com/albums/g2...6/DSCN2579.jpg

ur just jealous of my avatars :mad:

lol

woot! :D

hummm... not sure about that cutting out portion. :( isn' that piece there to prevent water entry?

actually the dampers go in at an angle. the rubber doesnt need to be cut but you will need to expose the ball joint.

That small amount should not change anything.

Ok that looks awesome now give me price Haha

Another part for my exclusive belgian 370

wat, you approve?

OK then, availability? :tup:

They replace the stock parts so it is Vegiproved :roflpuke2:

Sweet glade you guys like them.

Prices right now are:

Fronts= $99
Rears= $99

Use coupon code "370z" for a discount :)

Let me know if you have anymore questions.

Just a quick question, when you close the hood, can I close it like normal? Meaning I drop it from about 6 inches from close which latches everything or is now I have to lower it then push it close?

there's no application selection for 370z front hood... (?) :confused:

http://prosportgauges.com/carbon-fib...-damper-2.aspx

is there where you order?

about 3/4 way down the hood can be droped, but i prefer the push close method.

We will have the website updated very shortly. sorry for the delay.

Subscribed...

Good tip. on that link posted its From $129.00 to 79.00

not the other way around :roflpuke2: