Carbon fiber B pillars anyone??

NXTAZEE · 04-28-2010, 12:01 PM

The factory b-pillar covers have very soft paint on them, so they marr very easily. CF is much harder and way more resistant to marring. I'm wanting to replace mine with CF as well but don't know which one to go with either. It's easy to polish out the swirls in the paint on the pillars, but they will marr up right away again because of the soft paint

.

kenchan · 04-28-2010, 12:10 PM

Quote:

Originally Posted by NXTAZEE

The factory b-pillar covers have very soft paint on them, so they marr very easily. CF is much harder and way more resistant to marring.

um.... you do realize there is clearcoat on CF bits too...

the the b-pillars do haze easily, but they are also easy to polish if you have the right tools and technique.

and prevention is first step in detailing so just sayin'. CF alone will not fix hazing habits and poor cleaning technique.

NXTAZEE · 04-28-2010, 12:35 PM

Quote:

Originally Posted by kenchan

um.... you do realize there is clearcoat on CF bits too...

the the b-pillars do haze easily, but they are also easy to polish if you have the right tools and technique.

and prevention is first step in detailing so just sayin'. CF alone will not fix hazing habits and poor cleaning technique.

Carbon fiber is made with polyester resin if it's done cheaply, or Epoxy resin if it's good quality. Epoxy resin is very hard and resists oxidation and marring compared to polyester resin which will scratch and dull quickly. Spraying a couple layers of clear on top would be a good idea, but I doubt most are doing that. It's not poor cleaning technique that lightly scratches these dame pillars, it's the soft paint they use on them. Mine are getting lightly marred and you don't want to get into cleaning techniques with me

.

kenchan · 04-28-2010, 02:13 PM

Quote:

Originally Posted by NXTAZEE

you don't want to get into cleaning techniques with me

.

blah,

mine aren't swirled after polishing it. dealer swirled it during the initial wash, but since then no hazing, no swirls. so you dont have the wiping technique down.

NXTAZEE · 04-28-2010, 02:22 PM

Quote:

Originally Posted by kenchan

blah,

mine aren't swirled after polishing it. dealer swirled it during the initial wash, but since then no hazing, no swirls. so you dont have the wiping technique down.

04-28-2010, 12:01 PM	#1 (permalink)
NXTAZEE Track Member Join Date: May 2009 Location: Vancouver Island Posts: 530 Drives: 2010 370Z 7AT Rep Power: 18	The factory b-pillar covers have very soft paint on them, so they marr very easily. CF is much harder and way more resistant to marring. I'm wanting to replace mine with CF as well but don't know which one to go with either. It's easy to polish out the swirls in the paint on the pillars, but they will marr up right away again because of the soft paint . __________________ 2010 Carbon Silver 370Z 7AT charcoal int. sports package \| Clear Bra \| Invidia Gemini CBE \| CF B-Pillars \| CF Fangs \| CF Z emblems \| Swift Springs \| 20mm & 25mm Spacers \| SPC Camber Arms \| Brushed Aluminum shift knob

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EVO-R 370Z carbon fiber B Pillars	EVOR	Exterior & Interior	20	10-12-2011 10:51 PM
In Stock, Carbon Fiber B-Pillars @ The 370ZSORCE!!!!!!!!	Michael@TheZStore	Body Interior/Exterior	8	11-15-2010 04:04 PM
For trade: Carbon Fiber A Pillars	phelan	Parts for sale (Private Classifieds)	12	04-23-2010 08:45 AM
In Stock, Carbon Fiber B-Pillars @ The 370ZSORCE!!!!!!!!	Michael@TheZStore	Exterior & Interior	6	10-14-2009 02:37 PM
Carbon Fiber B pillars	SpawnAeroJohn	Nissan 370Z General Discussions	26	07-17-2009 08:25 AM