Clear bra gone wrong?? pcs inside

g35300mm · 04-18-2010, 02:37 PM

hey guys. Please give me some kind advice. I have had my front bumper, hood and fenders wrapped in venture shield ultra. I had a certified installer do the work and he used invisible patterns for the cutting. after giving the tape some time to cure i noticed many imperfections which i have emailed the installer about after emailing him the pictures. He said not to worry that he will take care of it. But really... what is needs to be done in order to get ride of these imperfections?

Thanks,

ps... what the heck are those blochy residue spots???

Xan · 04-18-2010, 02:40 PM

I'm sorry to say, but that looks awful!

Looks like the didn't seal the edges either...

The only thing I think to fix that is redo it and the second time around prep the paint properly to get everything off, before putting on the protection..

fullmonty · 04-18-2010, 02:46 PM

Ya they did a real for **** job

antennahead · 04-18-2010, 03:00 PM

I am sorry for you, because that install sucks! I had my first install removed and then a new bra put on by a pro, 3 hours away, because the first application was so bad........ and I think yours beats mine. That is horrible. My clear bra (second one by the REAL pro) is so good you literally cannot tell it is on the car. Product comes right to the edge of the fender wells, wraps over the top of the bumper and sits under the closed hood. The fang area is expertly covered as well. This guy did a hack job on you. Don't shoot the messenger here, I am on your side, this needs to be corrected!

g35300mm · 04-18-2010, 03:13 PM

Quote:

Originally Posted by antennahead

I am sorry for you, because that install sucks! I had my first install removed and then a new bra put on by a pro, 3 hours away, because the first application was so bad........ and I think yours beats mine. That is horrible. My clear bra (second one by the REAL pro) is so good you literally cannot tell it is on the car. Product comes right to the edge of the fender wells, wraps over the top of the bumper and sits under the closed hood. The fang area is expertly covered as well. This guy did a hack job on you. Don't shoot the messenger here, I am on your side, this needs to be corrected!

i agree. thanks guys.

Xan · 04-18-2010, 03:17 PM

This is what it is supposed to look like: Paint protection (clear bra) on 40th, with lots of pictures

Marco_xyz · 04-18-2010, 04:10 PM

Mannnnn,

hurts to see that. How much did you pay?

g35300mm · 04-18-2010, 05:45 PM

Quote:

Originally Posted by Marco@MRWorks

Mannnnn,

hurts to see that. How much did you pay?

$750 for hood fenders and bumper.

I just recieved an email response from the installer and he says he will be re doing the bumper for me.

370Zsteve · 04-18-2010, 05:48 PM

Looks like the crap job that poor bastard who had his entire 40th Anniv Z covered with had done by some butcher

antennahead · 04-18-2010, 05:50 PM

Quote:

Originally Posted by g35300mm

$750 for hood fenders and bumper.

I just recieved an email response from the installer and he says he will be re doing the bumper for me.

Good deal. My first install, the bad one, the installer wouldn't redo it. The cost to sue him was more than the job itself, and more hassle, so I drove to Charlotte and had a real pro redo it and the outcome is perfect. But you know what, I know a lot of people in this town, and the negative rap I gave him will be worse than if he had redone my bumper.

Nubz · 04-18-2010, 06:52 PM

After seeing the pics, Im nervous now because Im getting a clear bra put on my Z tomorrow. I hope my guy does a good job.

brakedrift12 · 04-18-2010, 07:38 PM

man... who the h*ll installed that clear bra? Was it the first time installing a clear bra for them or what? and they charged you 750?! It's good to hear that they are going to re-do the install. Hope they will do a good job this time

kfscoll · 04-18-2010, 09:14 PM

I have a few very small bubbles on the edges of my clear bra and a few specs of junk underneath...but nothing like you have. Still, I got mine done at Ziebart which is a chain, so I'm just going to go to a different location to have it fixed. Plus, I only paid $500 for mine. The tiny specs underneath in spots don't bug me that much because it's probably next to impossible to prevent all dust from getting in, but the bubbles on the edges are bad because water could get in there. Anyway, good that you're getting yours fixed...as I will be doing. in the meantime, it's doing as intended...which is to protect the paint underneath! Mine's got a lifetime warranty, too -- so I can get it fixed anytime.

g35300mm · 04-18-2010, 09:29 PM

Quote:

Originally Posted by brakedrift12

man... who the h*ll installed that clear bra? Was it the first time installing a clear bra for them or what? and they charged you 750?! It's good to hear that they are going to re-do the install. Hope they will do a good job this time

aha.. no i used aw cross link. They are a certified recommended mobile installer in canada on the venture shield website..

kenchan · 04-18-2010, 09:50 PM

it looks like the installer didn't use 50/50 alcohol with distilled water mix at the end to remove some of the water and soapy solution. the cloudy and small water traps will dissappear on its own, but the peel up he needs to use the 50/50 solution and try to push it down better.

it looks like a rushed job.

04-18-2010, 02:40 PM	#2 (permalink)
Xan A True Z Fanatic Join Date: Jan 2010 Location: MA Posts:99999999999999 Posts: 3,301 Drives: 370Z 40th Aniversary Rep Power: 24	I'm sorry to say, but that looks awful! Looks like the didn't seal the edges either... The only thing I think to fix that is redo it and the second time around prep the paint properly to get everything off, before putting on the protection.. __________________

04-18-2010, 02:46 PM	#3 (permalink)
fullmonty A True Z Fanatic Join Date: Nov 2009 Location: Dirty Jersey Posts: 7,762 Drives: 370 Touring/Sport Rep Power: 34	Ya they did a real for **** job __________________

04-18-2010, 03:00 PM	#4 (permalink)
antennahead A True Z Fanatic Join Date: Mar 2009 Location: Charleston, SC Posts: 15,181 Drives: '07 Z4 "M" Roadster Rep Power: 57	I am sorry for you, because that install sucks! I had my first install removed and then a new bra put on by a pro, 3 hours away, because the first application was so bad........ and I think yours beats mine. That is horrible. My clear bra (second one by the REAL pro) is so good you literally cannot tell it is on the car. Product comes right to the edge of the fender wells, wraps over the top of the bumper and sits under the closed hood. The fang area is expertly covered as well. This guy did a hack job on you. Don't shoot the messenger here, I am on your side, this needs to be corrected! __________________ *Time is a companion, who goes with us on the journey, and reminds us to cherish every moment............ because it will never come again*

04-18-2010, 03:17 PM	#6 (permalink)
Xan A True Z Fanatic Join Date: Jan 2010 Location: MA Posts:99999999999999 Posts: 3,301 Drives: 370Z 40th Aniversary Rep Power: 24	This is what it is supposed to look like: Paint protection (clear bra) on 40th, with lots of pictures __________________

04-18-2010, 05:48 PM	#9 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 43	Looks like the crap job that poor bastard who had his entire 40th Anniv Z covered with had done by some butcher __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

04-18-2010, 04:10 PM	#7 (permalink)
Marco_xyz Track Member Join Date: Nov 2009 Location: Sunny San Diego Posts: 710 Drives: 370z / '95 Supra Rep Power: 16	Mannnnn, hurts to see that. How much did you pay?

04-18-2010, 06:52 PM	#11 (permalink)
Nubz Base Member Join Date: Mar 2010 Location: Orlando, Fla Posts: 142 Drives: 2010 PG 370Z A7 Rep Power: 15	After seeing the pics, Im nervous now because Im getting a clear bra put on my Z tomorrow. I hope my guy does a good job.

04-18-2010, 07:38 PM	#12 (permalink)
brakedrift12 Enthusiast Member Join Date: Dec 2009 Location: virginia Posts: 266 Drives: 10 Nissan 370z 4G M6 Rep Power: 15	man... who the h*ll installed that clear bra? Was it the first time installing a clear bra for them or what? and they charged you 750?! It's good to hear that they are going to re-do the install. Hope they will do a good job this time

04-18-2010, 09:14 PM	#13 (permalink)
kfscoll Base Member Join Date: Mar 2010 Location: Cincinnati, OH Posts: 86 Drives: 09 370Z BS T/S/N 6MT Rep Power: 15	I have a few very small bubbles on the edges of my clear bra and a few specs of junk underneath...but nothing like you have. Still, I got mine done at Ziebart which is a chain, so I'm just going to go to a different location to have it fixed. Plus, I only paid $500 for mine. The tiny specs underneath in spots don't bug me that much because it's probably next to impossible to prevent all dust from getting in, but the bubbles on the edges are bad because water could get in there. Anyway, good that you're getting yours fixed...as I will be doing. in the meantime, it's doing as intended...which is to protect the paint underneath! Mine's got a lifetime warranty, too -- so I can get it fixed anytime.

04-18-2010, 09:50 PM	#15 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	it looks like the installer didn't use 50/50 alcohol with distilled water mix at the end to remove some of the water and soapy solution. the cloudy and small water traps will dissappear on its own, but the peel up he needs to use the 50/50 solution and try to push it down better. it looks like a rushed job.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is wrong with my ebrake....?	JakeZ34	Nissan 370Z General Discussions	33	10-30-2009 09:45 PM
+ 370 Donuts w/wrong end +	batman_4	Nissan 370Z Photos / Spyshots / Video / Media Gallery	3	09-23-2009 10:11 AM
What's wrong with the 6MT?	WooZ	Nissan 370Z General Discussions	40	08-29-2009 08:01 PM
Is it so wrong...	FricFrac	The Lounge (Off Topic)	4	06-03-2009 12:25 PM
What is wrong with Audi??	imnouser	Other Vehicles	4	03-07-2009 01:21 PM