Stillen bumper arrived today!!!!!!!

Jamaica · 05-06-2010, 09:37 PM

Quote:

Originally Posted by Josh@STILLEN

Ah yes.. should have mentioned the fangs. These are a modular item, and available on their own, and will have the option of tying into a functional brake ducting kit we'll have as well.

Oh and another fun fact.. on the right side scoop is a secondary oil cooler run in series, capitalizing on the fresh air.

The section in the middle above the giant hole is the air diversion for the Gen 3 / Supercharger Intakes..

new oil cooler?

HKYStormFront · 05-06-2010, 09:57 PM

like the fangs, shot some pics of mike's car tonight, i'll have them up next week (i'm on the road right now, my laptop is horrible for editing)

jmlenz · 05-07-2010, 01:21 AM

that bumper is looking better and better Stillen! Hopefully the completed kit ships soon!

Kyle@STILLEN · 05-07-2010, 01:50 AM

Quote:

Originally Posted by jamaica951

new oil cooler?

Yup! The photos don't really show it but on this fascia we've incorporated a second oil cooler. With this setup you can run Our large race oil cooler AND a smaller oil cooler! Good luck trying to overheat that engine oil now!

Mike · 05-07-2010, 09:02 AM

cant wait for the brake kit to come out!

nixxer · 05-07-2010, 10:17 AM

If its been asked, I'm unable to find a post, and did do a quick search. But... is Stillen planning a rear bumper? I like what they have made so far minus the wing, and am really interested what they could/would do to the rear. I know this is dangerous grounds I'm about to walk on, but I'm also curious if this front bumper will have issues with GTM's SC kit... Still, looks great!

RCZ · 05-07-2010, 10:45 AM

^ lol

Btw...Stillen, that car is BEGGING for a wider stance....spacers or new wheels please.

edit: I see ducting in the fangs

Kyle@STILLEN · 05-07-2010, 11:16 AM

We mounted some new enkei gtc01s last night with some toyo r888's...I hope to have new pics today.

In regards to the ducting in the fangs...the fangs do have a coupler on the backside for brake ducting. The complete kit with ducting should be done soon.

Kyle@STILLEN · 05-07-2010, 11:21 AM

Quote:

Originally Posted by hngonzalez

If its been asked, I'm unable to find a post, and did do a quick search. But... is Stillen planning a rear bumper? I like what they have made so far minus the wing, and am really interested what they could/would do to the rear. I know this is dangerous grounds I'm about to walk on, but I'm also curious if this front bumper will have issues with GTM's SC kit... Still, looks great!

We have had some discussions about the rear valance but were not 100% sure what we want to do there. In regards to the gtm supercharger. I really don't know if it would work. The grill opening could be trimmed to clearance their intercooler but I would be very concerned about their filter location. Looking at pictures of their kit I think they would be too open to the elements.

RCZ · 05-07-2010, 12:23 PM

Quote:

Originally Posted by Kyle@STILLEN

We mounted some new enkei gtc01s last night with some toyo r888's...I hope to have new pics today.

In regards to the ducting in the fangs...the fangs do have a coupler on the backside for brake ducting. The complete kit with ducting should be done soon.

Thats the game changer.

I actually thought I wouldn't like the fangs, but they look pretty good and add a nice touch to the fascia. I'm buying.

Mike · 05-07-2010, 12:27 PM

Kyle,
the only thing I would have done different with yours is to leave the top part where the air intake is for the filters in flat black like the bottom, but it does look great.

Kyle@STILLEN · 05-07-2010, 12:45 PM

Quote:

Originally Posted by Mike

Kyle,
the only thing I would have done different with yours is to leave the top part where the air intake is for the filters in flat black like the bottom, but it does look great.

We did think about that Mike and what I decided to do was just have our paint shop spray it red. Then I'm going to get some black tape and tape over it to see what we think. If we like it, then we'll spray it black later, if we don't, we'll leave it read...

My only concern with spraying it black is that it might make the opening look too big...We'll see after I tape it out. I just needed to get it done for the show this weekend. Steve and the guys were starting to give me grieft about the deadline!!!

By the way Mike, couple questions for you. Did your body shop paint the white styrofoam crash pad black so you can't see it through that opening? We're going to hit ours with some black spray paint just to conceal it a bit.

Also, I don't know if you still have that windshield washer reservoir but we have a fix for it to get it out of the way so that you can't see the ugly white bottle.

RCZ · 05-07-2010, 01:23 PM

Quick Pchop. I haven't seen the size of the Water heat exchanger in the stillen SC kit so its a guess, but I really like the looks of this.

I'm assuming the core we can see in your pictures is the race oil cooler and not the sc IC.

Kyle@STILLEN · 05-07-2010, 01:30 PM

Quote:

Originally Posted by RCZ

Quick Pchop. I haven't seen the size of the Water heat exchanger in the stillen SC kit so its a guess, but I really like the looks of this.

I'm assuming the core we can see in your pictures is the race oil cooler and not the sc IC.

Actually the heat exchanger is mounted to the left of the (looking at the car) and goes vertically. We did not want to block airflow to the radiator.

RCZ · 05-07-2010, 01:35 PM

OK, hehe let me take that out and just do the top portion blackout.

It looks very GT-R'ish

05-06-2010, 09:57 PM	#167 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	like the fangs, shot some pics of mike's car tonight, i'll have them up next week (i'm on the road right now, my laptop is horrible for editing) __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

05-07-2010, 09:02 AM	#170 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	cant wait for the brake kit to come out! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

05-07-2010, 10:17 AM	#171 (permalink)
nixxer Base Member Join Date: Jul 2009 Location: Hawaii Posts: 163 Drives: Black 370z 6MT Sp/T Rep Power: 16	If its been asked, I'm unable to find a post, and did do a quick search. But... is Stillen planning a rear bumper? I like what they have made so far minus the wing, and am really interested what they could/would do to the rear. I know this is dangerous grounds I'm about to walk on, but I'm also curious if this front bumper will have issues with GTM's SC kit... Still, looks great! __________________ FI TDX 12" \| FI LTH \| Injen CAI \| UpRev \| Tuned by AMS www.project-definition.com

05-07-2010, 10:45 AM	#172 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	^ lol Btw...Stillen, that car is BEGGING for a wider stance....spacers or new wheels please. edit: I see ducting in the fangs Last edited by RCZ; 05-07-2010 at 11:12 AM.

05-07-2010, 12:27 PM	#176 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	Kyle, the only thing I would have done different with yours is to leave the top part where the air intake is for the filters in flat black like the bottom, but it does look great. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

05-07-2010, 01:21 AM	#168 (permalink)
jmlenz Track Member Join Date: May 2009 Location: San Diego Posts: 645 Drives: a car Rep Power: 643	that bumper is looking better and better Stillen! Hopefully the completed kit ships soon!

05-07-2010, 11:16 AM	#173 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 306	We mounted some new enkei gtc01s last night with some toyo r888's...I hope to have new pics today. In regards to the ducting in the fangs...the fangs do have a coupler on the backside for brake ducting. The complete kit with ducting should be done soon.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Z Has Arrived!	370er	Australia/New Zealand	14	10-01-2009 10:33 PM
Arrived early	havasuwiley	New 370Z Owner	4	08-01-2009 12:54 PM
New Advan RS-D's arrived!!!!	370Ztune	Wheels & Tires	9	07-22-2009 06:32 PM
AntiTheft system arrived today	grahfz	The Lounge (Off Topic)	16	07-06-2009 11:27 PM
It has arrived...how can i sleep?	ZEDHEAD	Canada	6	04-16-2009 07:16 PM