Project: Nismo

Thano

So I purchased my Z before the nismo came out. I love my car, but immediately fell in love with the nismo body, so i decided to do the conversion and post the results. I didn't post this in the nismo parts thread simply because it got so long that finding useful info in it was becoming difficult.

WANTED: If anyone with a Nismo plans to get a aftermarket spoiler and would be at all interested in selling their stock Nismo spoiler, I am VERY interested. I know this is a longshot but send me a PM if you are!!




This is the front bumper. All of the pieces came on different days.






Pulled the stock front off to do a test fitment.




Rear bumper cover




Test fitting rear.




First page of list for ordered parts...




Second page of parts...




Third page. You'll notice 2 parts returned...this was support bars for the front and rear which the dealership insisted that I needed (which I knew i did not) but decided better safe than sorry. Sure enough, they turned out to be EXACTLY the same

Also, the under engine cover that connects to the front bumper is RIDICULOUSLY expensive. It retails for $1168.88 which i payed net cost at $935.10. It was the single most expensive piece. More than both bumpers combined. I'm still waiting for it to come in. When it does I will post pics of it and if anyone on here can fabricate one, let me know. I wouldn't mind making duplicates of it for other people looking to do the conversion on the forums here.

Also you'll notice that I haven't ordered the Nismo Spoiler. This is because it is over $2000 which, after purchasing the under engine cover, I was not quite willing to do....yet. When I do finally do it, I will post pics.

I Will keep posting pics as more gets done. Just painted the bumpers and side skirts and will post pics of them on Sunday when I get back in town. Let me know if you have ANY questions.

Part Numbers:
FBM23-1A47H (Front Bumper)
HEM23-1A47H (Rear Bumper)
G6853-1A31H (Side skirt)
G6852-1A31H (other Side Skirt)
H5249-1A30A (Bracket - this is used in the middle of the rear bumper. It is different than the stock bracket)
G5892-1A30A (Under Engine Cover)
F3845-1A30A (Front inner wheel well liner for one side)
F3844-1A30A (Other side - Without these there is a gap between the sides of the fron bumper and the inner liner of the wheel wells)
76882-EG01A (Replacement clips for the side skirt - from experience on other vehicles, these break. I got these for backup :P )
F2026-1A47A (Lip for under the front bumper)


:UPDATE:

New Pics! Got the front bumpers on for a good test fitment with the new wheel well liners for the front and found more parts were needed.






You can see the gap between the front and rear bumpers and the wheel wells. This is where the protectors need to go which I just got ordered this morning. Why Nissan didnt just make them as part of the bumper covers is beyond me...





these are the 2 brackets for the rear bumper. I've had a lot of inquiries about this part. You'll notice that the nismo one is shorter than the stock one. This part hold the bumper and is located in the middle of the back bumper.













Here are the two bumpers painted. The side skirts didn't turn out as well as I wanted so I sanded them down and am repainting them today. Also, I need ideas for how I should badge it! Stay tuned for more pics!

:UPDATE:

Got pics of the side skirts! Project is getting close to completion!

SMcK23

Wow, that's a lot of work and money! Would it have been easier and cheaper to just trade your Z in, take the hit and get the Nismo?

Thano

Easier? Yes. Cheaper? Debatable... If I can fabricate the under engine cover and send it back, then i'll come out a lot cheaper. Plus, I can do all the body work/painting

Snakes709

I'm doing this same thing. Would you be able to write out in a post what each part is, the picture cuts off what exactly it is.

Edit: By the way, not sure if its legit, but they have the engine under cover for $450 on ebay.

__________________
2011 Evo-GSR AMS 2.4 stroker/ bore, FP Black build in progress.
Sponsor: DSG Performance

Thano

Edited with part descriptions

ducky

sound like alot of work and $$$..i do want just the rear bumper though..how much total did you pay for the rear bumper? and did you need any other parts to fit it? or it fit perfectly without any accessories that needed..

Thano

"Genuine Nismo Z Front Bumper Diffuser: 09 370Z"

I'm assuming that is what you mean? If so, that is the front "lip", not the cover piece.

Snakes709

I orderd the nismo kit from Godspeed. Once its being shipped ill order a few parts from the dealership, defently not getting the undercover...lol. What exactly is F2026-1A47A (Lip for under the front bumper)?

__________________
2011 Evo-GSR AMS 2.4 stroker/ bore, FP Black build in progress.
Sponsor: DSG Performance

kevin.z

i thought you cant order nismo parts from dealers. how did u get yours?

jmlenz

I have the rear Nismo fascia on order from Z1. What is that rear bracket that you say is in the middle of bumper? First I've heard of that. The other guy that installed this bumper made no mention of it. Also, you are going to need the "protectors" as Nissan calls them for the rear fender liners otherwise you will have a gap back there too.

Thano

That's what i thought, but when I checked the dealership said that the part number is the same. I guess ill have to go back and bust some heads =P

Thano

The front diffuser or chin is what I commonly see the lip being called. Basically goes under the front bumper.

The bracket for the rear is basically a support piece. Ill post pics of the regular bracket and the nismo piece side by side when I'm back in town Sunday night. It's probably not a REQIRED part but I'd rather have ikt than not

Snakes709

Well if it isnt to expensive ill get it, but paying $1000 for a under cover...screw that, all it does is keeps the bottom side of the engine clean. I would rather get under my car every week and clean the engine then pay that much for a piece of plastic.

__________________
2011 Evo-GSR AMS 2.4 stroker/ bore, FP Black build in progress.
Sponsor: DSG Performance

6spd

what is this "under engine cover" on the nismo?

__________________
-Jay- jonathanjamesphotographer.com

Snakes709

same as it is on the tour/sport, except the nismo is a few inches longer i think.

__________________
2011 Evo-GSR AMS 2.4 stroker/ bore, FP Black build in progress.
Sponsor: DSG Performance