Using Jack Stand...where to contact point?

CB1 · 11-11-2011, 09:45 PM

I am putting on HFC and a CBE system. Got everything off except the stock cats. Damm those bolts are a mother f*cker!!!!! I already broke a 14mm socket trying to get the passenger side bolt loose that you have to go in from the top of the engine bay. St*t!

CB1 · 11-11-2011, 10:08 PM

Nissan 370Z Forum - CB1's Album: Misc. - Picture

Hard to see my red circles... Are these the front and rear "Garage Jack Points"?

dAvenue · 11-11-2011, 10:21 PM

Quote:

Originally Posted by CB1

Nissan 370Z Forum - CB1's Album: Misc. - Picture

Hard to see my red circles... Are these the front and rear "Garage Jack Points"?

For the front, that is the contact point I used. I haven't needed to jack up the rear yet, though.

WShade · 11-11-2011, 10:58 PM

Quote:

Originally Posted by CB1

Nissan 370Z Forum - CB1's Album: Misc. - Picture

Hard to see my red circles... Are these the front and rear "Garage Jack Points"?

Figured I would post in this thread and not the other. That is it. I have a Craftsman 4 ton jack with removable saddle. I remove the saddle when I jack the front and the dimple fits right in the hole on the jack plate very nice and secure.

KillerBee370 · 11-11-2011, 11:09 PM

Quote:

Originally Posted by EazyD

Can someone circle the rear and front jack points? Diagram is confusing and people's descriptions are confusing (to me!). Rep will be awarded

EazyD · 11-12-2011, 01:49 PM

Quote:

Originally Posted by KillerBee370

Quote:

Originally Posted by CB1

Nissan 370Z Forum - CB1's Album: Misc. - Picture

Hard to see my red circles... Are these the front and rear "Garage Jack Points"?

Repped. I wish I had these images a couple weeks ago

This should have its own thread. I encourage you to create "370Z Floor Jack Points" thread so people can find it in search

Trips · 11-12-2011, 03:05 PM

Thread has been sticky tagged for people to find

CB1 · 11-12-2011, 06:06 PM

Thanks! Looked for a while for this with no luck.
I have just one more cat bolt... Can't believe how hard these are to get off...

happytheman · 11-28-2011, 07:00 PM

This is good info to have, esp considering the orig diagram is crap!

scottIN · 02-28-2012, 03:57 PM

Okay, so this weekend I'm going to put on my Evo-R side blades. How do I go about jacking up one side at a time and putting jack stands under it?

KillerBee370 · 02-28-2012, 05:30 PM

Quote:

Originally Posted by scottIN

Okay, so this weekend I'm going to put on my Evo-R side blades. How do I go about jacking up one side at a time and putting jack stands under it?

lol... you simply get a floor jack (one will do) and put it under the side towards the front where the little notches are (jacking point) and hoist. The whole side of the car will come up (both wheels). I use a couple of jack stands just for added security and viola!

happytheman · 04-18-2012, 11:41 PM

Quote:

Originally Posted by KillerBee370

I would really love to see what it looks like where the four lift points are at.

KillerBee370 · 04-19-2012, 12:25 AM

Quote:

Originally Posted by happytheman

I would really love to see what it looks like where the four lift points are at.

?? The four lift points are on each side. There's a little double notch along the metal "rail". Refer to the manual for the diagram.

anthonyy · 04-19-2012, 12:17 PM

Quote:

Originally Posted by happytheman

I would really love to see what it looks like where the four lift points are at.

where the notches in the pinch rail are

dAvenue · 04-19-2012, 11:54 PM

Quote:

Originally Posted by happytheman

I would really love to see what it looks like where the four lift points are at.

They're located where the dual notches/grooves are bro. Underneath the side skirt and near the tire.

11-11-2011, 09:45 PM	#16 (permalink)
CB1 Base Member Join Date: Jun 2011 Location: Washington Posts: 188 Drives: 2011 Touring/Sport Rep Power: 30	I am putting on HFC and a CBE system. Got everything off except the stock cats. Damm those bolts are a mother fcker!!!!! I already broke a 14mm socket trying to get the passenger side bolt loose that you have to go in from the top of the engine bay. Stt! __________________ 2011 Metallic Black, Touring/Sport, Nav, AT \| F.I. Twin Turbo #060 \| E85 \| F.I. Built 7AT \| F.I. Flex Plate \| F.I. 34 Row Oil Cooler \| F.I. 19 Row 7AT Cooler \| ECUTEK Tuned By Sebastian \| 647 WHP 605 TQ \|

11-11-2011, 10:08 PM	#17 (permalink)
CB1 Base Member Join Date: Jun 2011 Location: Washington Posts: 188 Drives: 2011 Touring/Sport Rep Power: 30	Nissan 370Z Forum - CB1's Album: Misc. - Picture Hard to see my red circles... Are these the front and rear "Garage Jack Points"? __________________ 2011 Metallic Black, Touring/Sport, Nav, AT \| F.I. Twin Turbo #060 \| E85 \| F.I. Built 7AT \| F.I. Flex Plate \| F.I. 34 Row Oil Cooler \| F.I. 19 Row 7AT Cooler \| ECUTEK Tuned By Sebastian \| 647 WHP 605 TQ \|

11-12-2011, 03:05 PM	#22 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Thread has been sticky tagged for people to find __________________

11-12-2011, 06:06 PM	#23 (permalink)
CB1 Base Member Join Date: Jun 2011 Location: Washington Posts: 188 Drives: 2011 Touring/Sport Rep Power: 30	Thanks! Looked for a while for this with no luck. I have just one more cat bolt... Can't believe how hard these are to get off... __________________ 2011 Metallic Black, Touring/Sport, Nav, AT \| F.I. Twin Turbo #060 \| E85 \| F.I. Built 7AT \| F.I. Flex Plate \| F.I. 34 Row Oil Cooler \| F.I. 19 Row 7AT Cooler \| ECUTEK Tuned By Sebastian \| 647 WHP 605 TQ \|

11-28-2011, 07:00 PM	#24 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	This is good info to have, esp considering the orig diagram is crap! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

02-28-2012, 03:57 PM	#25 (permalink)
scottIN Track Member Join Date: Aug 2011 Location: New Castle, Indiana Posts: 764 Drives: '12 370Z Rep Power: 55	Okay, so this weekend I'm going to put on my Evo-R side blades. How do I go about jacking up one side at a time and putting jack stands under it?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jack Stand Question	spearfish25	Nissan 370Z General Discussions	143	10-16-2015 12:30 PM
Rear jack point	speedworks	Intake/Exhaust	20	10-27-2010 10:36 AM
Jack Stands	Minicobra1	DIY Section (Do-It-Yourself)	19	03-07-2010 05:54 PM
Stand behind your car and push down on the hatch.	shesha	Nissan 370Z General Discussions	18	09-14-2009 04:57 AM
Dealership contact/updates after ordering a car	takimbe	Nissan 370Z Pricing / Ordering Discussions	13	04-03-2009 02:42 AM