3m Ni Doc carbon fiber vinyl

Ztoon · 06-29-2010, 11:00 AM

Quote:

Originally Posted by 209Z

yes you can clear coat it

and whats the best technique to wrap shifter ring?

Start from the inside, and work evenly to the outside edges. Just don't stretch the material too much under heat, as it retains some memory, and the indent areas will separate the first hot day.

NewYorkJon34 · 06-29-2010, 04:42 PM

Quote:

Originally Posted by Ztoon

Want some fun?... Try wrapping the shift ring.
3 tries for me before I had it down finally.

Do you have a picture of this?^ I'd really like to see what it looks like

Ztoon · 06-29-2010, 06:13 PM

Quote:

Originally Posted by NewYorkJon34

Do you have a picture of this?^ I'd really like to see what it looks like

Posted on my Mods album

NovoWorks · 06-29-2010, 09:11 PM

Nice to see some people enjoying the CF Di-Noc

kenchan · 06-29-2010, 10:51 PM

this is not the 3M stuff, but you can do the same. i just had this stuff laying around... notice my CF pen...

boring trim...

i used a heatgun, hot to the touch but not super hot. and it contours to the plastic very well. it looks
better in person, i couldnt get the lighting right due to the reflection.

370Z JT · 06-30-2010, 02:12 AM

^nice touch!

kenchan · 06-30-2010, 06:44 AM

Quote:

Originally Posted by 370Z JT

^nice touch!

Thanks!

I think I'm still going to get me the 3M stuff later on for the gauge hats. I want to wrap them with matte finish so it does not reflect sun too much.

Anyone think about wrapping their stock muffler can with this stuff?

wats the max temp the sheet can handle?

simota1 · 06-30-2010, 06:46 AM

Quote:

Originally Posted by kenchan

this is not the 3M stuff, but you can do the same. i just had this stuff laying around... notice my CF pen...

boring trim...

i used a heatgun, hot to the touch but not super hot. and it contours to the plastic very well. it looks
better in person, i couldnt get the lighting right due to the reflection.

i have some of that stuff lying around man... damn you kanchan.. now i have a project when im bored.. and i get bored fast LMAO

can i use a hair dryer also? my heat gun is MIA at the moment

fullmonty · 06-30-2010, 07:06 AM

Oh man this NiDoc stuff is like a wet dream. Kenchan- what is it you used on the steering wheel trim?

Jeffblue · 06-30-2010, 07:11 AM

looks cool

kenchan · 06-30-2010, 07:48 AM

Yah, hair drier is fine, but I have this smaller heat gun that blows precisely to the part I'm heating. I put my thumb next to where I'm heating so that I can feel how hot the area is getting not to damage it.

Thanks guys. The CF film I had I bought a long time ago in Japan at a hobby shop. I'm not sure what the material is but I used it on previous car door switch trims and lasted a long time. Like yrs without fading.
Didn't have these nice 3M materials back then so we only had access to these printed simulated sheets. Its super thin and wraps very easily to the contours.

I have some other thicker CF looking stuff my wife bought in Japan long time ago which requires me to spray adhesive on the back side (or get some large thin double stick tape). I might use that for the door trims down the road.

kenchan · 06-30-2010, 08:34 AM

Those gauge hats (3) are all the same size, correct? Anyone know?

simota1 · 06-30-2010, 11:16 AM

pretty sure they are all the same size

kenchan · 06-30-2010, 11:33 AM

yah, from a manufacturing perspective i doubt they would use 3 different sizes. be too much work.

i ordered up some of that 3M stuff.

should have it by Saturday, hopefully.

just a sidenote: my fujimura CF rear diffuser shipped... should have by Sat too.

simota1 · 06-30-2010, 11:36 AM

post pics my brotha!!!!! gonna be sick

06-29-2010, 09:11 PM	#34 (permalink)
NovoWorks Base Member Join Date: Jun 2010 Location: Plano (Dallas), TX Posts: 6 Drives: 08 Honda Fit Rep Power: 15	Nice to see some people enjoying the CF Di-Noc __________________ Mike N

06-29-2010, 10:51 PM	#35 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	this is not the 3M stuff, but you can do the same. i just had this stuff laying around... notice my CF pen... boring trim... i used a heatgun, hot to the touch but not super hot. and it contours to the plastic very well. it looks better in person, i couldnt get the lighting right due to the reflection. Last edited by kenchan; 06-29-2010 at 11:05 PM.

06-30-2010, 02:12 AM	#36 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	^nice touch! __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

06-30-2010, 07:06 AM	#39 (permalink)
fullmonty A True Z Fanatic Join Date: Nov 2009 Location: Dirty Jersey Posts: 7,762 Drives: 370 Touring/Sport Rep Power: 33	Oh man this NiDoc stuff is like a wet dream. Kenchan- what is it you used on the steering wheel trim? __________________

06-30-2010, 11:16 AM	#43 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	pretty sure they are all the same size __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

06-30-2010, 07:11 AM	#40 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 36 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 37	looks cool

06-30-2010, 07:48 AM	#41 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Yah, hair drier is fine, but I have this smaller heat gun that blows precisely to the part I'm heating. I put my thumb next to where I'm heating so that I can feel how hot the area is getting not to damage it. Thanks guys. The CF film I had I bought a long time ago in Japan at a hobby shop. I'm not sure what the material is but I used it on previous car door switch trims and lasted a long time. Like yrs without fading. Didn't have these nice 3M materials back then so we only had access to these printed simulated sheets. Its super thin and wraps very easily to the contours. I have some other thicker CF looking stuff my wife bought in Japan long time ago which requires me to spray adhesive on the back side (or get some large thin double stick tape). I might use that for the door trims down the road.

06-30-2010, 08:34 AM	#42 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Those gauge hats (3) are all the same size, correct? Anyone know?

06-30-2010, 11:33 AM	#44 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yah, from a manufacturing perspective i doubt they would use 3 different sizes. be too much work. i ordered up some of that 3M stuff. should have it by Saturday, hopefully. just a sidenote: my fujimura CF rear diffuser shipped... should have by Sat too.

06-30-2010, 11:36 AM	#45 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	post pics my brotha!!!!! gonna be sick __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber Nightmare and SEIBON Carbon	motoextreme	Exterior & Interior	36	06-16-2010 02:44 AM
3M DINOC Carbon Vinyl Wrap	spearfish25	Exterior & Interior	10	12-12-2009 09:50 PM
Full Carbon Fiber Z?	NYBladeZ	Exterior & Interior	3	10-22-2009 05:37 PM
Carbon Fiber B pillars	SpawnAeroJohn	Nissan 370Z General Discussions	26	07-17-2009 08:25 AM
looking for 370z for carbon fiber project and free carbon fiber products	370z_hot	Exterior & Interior	23	05-16-2009 09:32 PM