I have a 2013 Nismo and I need to figure out a part number. Under the front bumper about 6 to 8 inches there is a cover shield that is
|
|
LinkBack | Thread Tools | Display Modes |
05-03-2021, 07:06 AM | #1 (permalink) |
Base Member
Join Date: Apr 2012
Location: Colorado
Posts: 93
Drives: 2013 Nismo
Rep Power: 13 |
Need help with part numbers for underside part(s)
I have a 2013 Nismo and I need to figure out a part number. Under the front bumper about 6 to 8 inches there is a cover shield that is about 5" wide and 4' long. What is it? A couple of the push pin fasteners came off and part of it got damaged when I went over a speed bump. Also need the part number of the fasteners.
|
05-03-2021, 07:56 AM | #2 (permalink) |
A True Z Fanatic
Join Date: Mar 2011
Location: NJ
Posts: 2,402
Drives: slowly
Rep Power: 40569 |
https://www.nissanpartsdeal.com/part...agram=620_A002
https://www.nissanpartsdeal.com/part...026-1a47a.html Nissan Part No.: F2026-1A47A
__________________
GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs |
05-04-2021, 08:40 AM | #4 (permalink) |
Base Member
Join Date: Apr 2012
Location: Colorado
Posts: 93
Drives: 2013 Nismo
Rep Power: 13 |
After searching around for a bit, found it: 75895 1A30B. But holy jump for jesus, dealerships want around $120 for it. Ended up just fabricating one out of a 1/16 ABS sheet. $22 bucks and about 30 minutes of time.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Connector part numbers | dts3 | DIY Section (Do-It-Yourself) | 5 | 01-03-2019 10:36 AM |
Can someone help me with some OEM part numbers? | wind.zero | Nissan 370Z General Discussions | 8 | 01-30-2014 07:25 PM |
370z Part Numbers | Fooch | Nissan 370Z Owners Manual / Service Manuals | 5 | 07-28-2012 09:21 AM |
OEM Part numbers and Diyagram? | Valentino | Nissan 370Z Owners Manual / Service Manuals | 5 | 02-09-2010 04:38 PM |