https://www.carandtruckremotes.com/2...BoCA3YQAvD_BwE

I just bought one from this website, $93 for the genuine Nissan fob. It comes unprogrammed, so I'll do a couple of upates. One after I receive it to verify it has a "Z" on it and the second after I have it programmed.

BTW, the FCC code matches the ones I currently have. I'm replacing one fob because the 'panic' button was worn off and I tried replacing just that one with one of the 'el cheapo' ones off of eBay. Needless to say, the 'panic' button doesn't work now....:ugh2:

Parts available on Amazon - Murano Shell
 

Hey, I did a fob refresh a while back and used the Murano shell parts to replace the 3 button pads. Here's the parts that I ordered. I used the Z cover to keep the original look. Less expensive than the whole Z Shell and just as useful.

Here's the parts I ordered:

Link to the updated shell parts on Amazon.com
https://www.amazon.com/qualitykeyles...NsaWNrPXRydWU=

Note: the parts shells sales listings change from year to year. I have used the 3 button shells amazon sells without issues. I search for the most current listings there and go with what they have.

Here's my original write-up:
http://www.the370z.com/diy-section-d...d-refresh.html

The problem I ran into was that the retainer holding the buttons had to be cut out of the replacement shell. Does the retainer on the ones from Amazon come out the same as the Z or do they have to be cut out? Thanks.


BTW, great write-up on your DIY. I've done several fobs over the years, this is the first one that's given me grief. :ugh2: