GT-R seats in my 370Z!

OttawaCDBR · 04-15-2020, 01:22 AM

So I’m halfway there - passenger seat is in, wired, all-way power, all sensors working and no warning lights. Needs a little fabrication work to finish the rails.
This was a lot of work. It’s been tried before but never successfully to my knowledge. LMore pics later but here’s a teaser...

Sent from my iPhone using Tapatalk

Quicksilvers · 04-15-2020, 01:39 AM

Congratulations and kudos to you I have not seen this successfully done before in our cars. The GTR seats are comfortable and look beefy and large in the 370Z cockpit.

OptionZero · 04-15-2020, 02:59 AM

Is this really cost effective when you need custom work to make it fit?

Wouldn't just . . . a Recaro Sportster CS be better and easier, assuming it fits your frame?

POS VETT · 04-15-2020, 07:49 AM

How do the weights compare?

crazy4oldcars · 04-15-2020, 08:54 AM

Quote:

Originally Posted by POS VETT

How do the weights compare?

Power seats, so I doubt the weight was the main consideration...

Kirk B.

Quicksilvers · 04-15-2020, 12:02 PM

Quote:

Originally Posted by POS VETT

How do the weights compare?

Yes he definitely didn’t swap out to the GTR seats for weight reduction the Nissan GTR is a heavy pig to begin with. Any GTR owner should be more than happy to sell you their seats to try to curb some weight. Not only are the GTR seats expensive but they weight quite a bit. Again the GTR seats are more comfortable though. When my friend at the track swapped out his GTR seats for the Sparco R333 seats he weighted his GTR seats they came in at 66.4 lbs. for the drivers seats and 58.4 lbs. for the passenger seat power seats are generally always heavy.

Nixin · 04-15-2020, 12:45 PM

Wow, great job OP. Thanks for the idea.

OttawaCDBR · 04-15-2020, 04:10 PM

Weight was never a consideration.
The reason I swapped was to get the all-way power (front/back - up/down - lumbar support- thigh support), and they’re leather. I had manual cloth seats in my base 2017 6MT. My wife could not see over the hood in either seat. She would not drive it.
370Z power seats only go front/back, and can have heaters. The GT-R also has heaters but I’m not connecting them as I store my car over the winter.
Plus overall they are more plush and comfortable. Lumbar support is good for my back and thigh support deals with my long legs. Makes the car overall more luxurious and special. They should, seats from a $130k car in a $30k car.....

Sent from my iPhone using Tapatalk

Tractionless · 04-18-2020, 02:42 PM

Would be awesome to submit a full how-to.

OttawaCDBR · 04-18-2020, 08:17 PM

I will. I’m doing a number of mods and have to start a build thread so all are in one place

Sent from my iPhone using Tapatalk

sunkist350z · 04-19-2020, 01:39 PM

Quote:

Originally Posted by OptionZero

Is this really cost effective when you need custom work to make it fit?

Wouldn't just . . . a Recaro Sportster CS be better and easier, assuming it fits your frame?

Seats look good, I for one what do the same thing as I had Sparco seats on 350z vqhr and it threw an annoying airbag signal on the dash plus in an event of a crash no airbags to protect you.

Tractionless · 04-22-2020, 04:44 PM

Quote:

Originally Posted by OttawaCDBR

I will. I’m doing a number of mods and have to start a build thread so all are in one place

Sent from my iPhone using Tapatalk

Can you throw a heads up on this post when you post the how-to please!? I'm definitely in as soon as I see what's involved.

OttawaCDBR · 04-22-2020, 05:30 PM

I will indeed. For now I will say:

Most of the info you need is out there.
The rails are problematic.
I am an electrician by trade you need soldering skills
I found the seats for $700 CAD ($500 USD) for the pair

Sent from my iPhone using Tapatalk

Tractionless · 04-24-2020, 10:22 PM

Quote:

Originally Posted by OttawaCDBR

I will indeed. For now I will say:

Most of the info you need is out there.
The rails are problematic.
I am an electrician by trade you need soldering skills
I found the seats for $700 CAD ($500 USD) for the pair

Sent from my iPhone using Tapatalk

Thanks, no worries about soldering been at the mod game since 1998. My biggest worry is the rails.

How much closer to the roof do the GTR seats put your head? I'm 6'1 with only about 1-1.5" to spare as it is.

Great price on the seats!!

OttawaCDBR · 04-24-2020, 10:26 PM

I don’t know yet until rails are finalized. I’m 6’2” so it was a factor. I don’t think it will lessen headroom. The top of the GTR seats seem about the same height as the 370z as do the headrests.
I’ll let you know when I get the car back next week.

Sent from my iPhone using Tapatalk

04-15-2020, 01:22 AM	#1 (permalink)
OttawaCDBR Base Member Join Date: Oct 2017 Location: Ottawa Canada Posts: 51 Drives: 17 Nissan 370Z CS M6 Rep Power: 8	GT-R seats in my 370Z! So I’m halfway there - passenger seat is in, wired, all-way power, all sensors working and no warning lights. Needs a little fabrication work to finish the rails. This was a lot of work. It’s been tried before but never successfully to my knowledge. LMore pics later but here’s a teaser... Sent from my iPhone using Tapatalk 2011 Nismo#91, JARblue, danegrey and 2 others like this.

04-15-2020, 01:39 AM	#2 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,039 Drives: 2017 370z Rep Power: 25463	Congratulations and kudos to you I have not seen this successfully done before in our cars. The GTR seats are comfortable and look beefy and large in the 370Z cockpit. __________________ Mr. Clean

04-15-2020, 02:59 AM	#3 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	Is this really cost effective when you need custom work to make it fit? Wouldn't just . . . a Recaro Sportster CS be better and easier, assuming it fits your frame? __________________ OptionZero Build Thread

04-15-2020, 04:10 PM	#8 (permalink)
OttawaCDBR Base Member Join Date: Oct 2017 Location: Ottawa Canada Posts: 51 Drives: 17 Nissan 370Z CS M6 Rep Power: 8	Weight was never a consideration. The reason I swapped was to get the all-way power (front/back - up/down - lumbar support- thigh support), and they’re leather. I had manual cloth seats in my base 2017 6MT. My wife could not see over the hood in either seat. She would not drive it. 370Z power seats only go front/back, and can have heaters. The GT-R also has heaters but I’m not connecting them as I store my car over the winter. Plus overall they are more plush and comfortable. Lumbar support is good for my back and thigh support deals with my long legs. Makes the car overall more luxurious and special. They should, seats from a $130k car in a $30k car..... Sent from my iPhone using Tapatalk crazy4oldcars, Quicksilvers and sportsman2003 like this.

04-18-2020, 02:42 PM	#9 (permalink)
Tractionless A True Z Fanatic Join Date: Jan 2016 Location: Atlantic SE Posts: 1,326 Drives: '10 K23 ST 7AT Rep Power: 30525	Would be awesome to submit a full how-to. __________________ Toys Not Tots

04-15-2020, 07:49 AM	#4 (permalink)
POS VETT Track Member Join Date: Apr 2015 Location: Columbus OH Posts: 612 Drives: Z34\|C4LT4\|C6Z06\|V25 Rep Power: 3366	How do the weights compare?

04-15-2020, 12:45 PM	#7 (permalink)
Nixin A True Z Fanatic Join Date: Sep 2015 Location: GWN Posts: 3,488 Drives: Goodbye Z! Rep Power: 19833	Wow, great job OP. Thanks for the idea.

04-18-2020, 08:17 PM	#10 (permalink)
OttawaCDBR Base Member Join Date: Oct 2017 Location: Ottawa Canada Posts: 51 Drives: 17 Nissan 370Z CS M6 Rep Power: 8	I will. I’m doing a number of mods and have to start a build thread so all are in one place Sent from my iPhone using Tapatalk Tractionless likes this.

04-22-2020, 05:30 PM	#13 (permalink)
OttawaCDBR Base Member Join Date: Oct 2017 Location: Ottawa Canada Posts: 51 Drives: 17 Nissan 370Z CS M6 Rep Power: 8	I will indeed. For now I will say: Most of the info you need is out there. The rails are problematic. I am an electrician by trade you need soldering skills I found the seats for $700 CAD ($500 USD) for the pair Sent from my iPhone using Tapatalk

04-24-2020, 10:26 PM	#15 (permalink)
OttawaCDBR Base Member Join Date: Oct 2017 Location: Ottawa Canada Posts: 51 Drives: 17 Nissan 370Z CS M6 Rep Power: 8	I don’t know yet until rails are finalized. I’m 6’2” so it was a factor. I don’t think it will lessen headroom. The top of the GTR seats seem about the same height as the 370z as do the headrests. I’ll let you know when I get the car back next week. Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] LF TRade Base Seats for 2015ish Nismo Recaro seats	kljw5	Parts for sale (Private Classifieds)	6	06-14-2018 09:13 AM
[FOR SALE] few items for sale, touring seats, base seats, cf fenders, stillen skirts, etc	martin82	Parts for sale (Private Classifieds)	33	04-25-2014 01:48 PM
[WTB] Nismo Seats (also willing to swap my original base seats + cash for upgraded seats)	Refractor999	Parts for sale (Private Classifieds)	2	01-30-2013 07:34 AM
WTT Gray leather seats+Cash for Red 40th Seats	Econ	Wanted	1	02-27-2011 04:24 PM
WTT: Black Leather/Suede Seats and Cash - for - Red 40th Anniversary 370Z Seats	'10Anamoly	Parts for sale (Private Classifieds)	8	08-14-2010 10:42 PM