Theft proof screw on steering wheel airbag assembly

Spooler · 02-07-2020, 03:31 PM

Snap-On man is your friend.

redondoaveb · 02-07-2020, 03:45 PM

Quote:

Originally Posted by Spooler

Snap-On man is your friend.

I believe the tool can only be sold to an authorized nissan dealer.

Ghostvette · 02-07-2020, 03:50 PM

I looked through the snap-on on-line catalog, I couldn't find it under the OTC number.

redondoaveb · 02-07-2020, 04:06 PM

I don't know why nissan only did it on certain years.

Jayhovah · 02-07-2020, 04:06 PM

In the past when I haven't had the appropriate screwdriver I have used a dremel+abrasive cutoff disk to grind a slot into the head of the screw and then remove with a flat head screwdriver.

redondoaveb · 02-07-2020, 04:23 PM

Quote:

Originally Posted by Jayhovah

In the past when I haven't had the appropriate screwdriver I have used a dremel+abrasive cutoff disk to grind a slot into the head of the screw and then remove with a flat head screwdriver.

That's one of my plans but the problem is you have to destroy the plastic trim piece that has the access holes for the airbags screws in order to get to the screws. It attaches to the steering wheel. I found the trim piece from a salvage yard on facebook for $35.00.

Rusty · 02-07-2020, 11:37 PM

Quote:

Originally Posted by Ghostvette

https://www.getoemparts.com/oem-part...UaAqX4EALw_wcB

The description shows the removal tool as part of the kit for the screw. I'm not sure this will help...
I found the key kit, but it says it's available to Nissan dealers only.

This is the bolt only kit. Does not include the key.

Rusty · 02-07-2020, 11:45 PM

Quote:

Originally Posted by Ghostvette

Another link
https://carefordescientific.com/otc-...-bag-lock-set/

Everything I read. All of the kits are dealer only.

redondoaveb · 02-07-2020, 11:54 PM

Quote:

Originally Posted by Rusty

Everything I read. All of the kits are dealer only.

I might have found a company on ebay. I messaged them and ask if it included the tool because their kit was $22.00. They replied and ask for my VIN#. I'm hoping that means their verifying that it's not a stolen car and will sell me the tool.

JARblue · 02-08-2020, 01:46 AM

A tamper-proof or vandal-proof torx bit has a hole in the middle of the bit. Easy to find. Harbor Freight has a cheap security bit set of 50 bits or something for like $10. Although the particular set I'm thinking of may not have a large enough bit for this job.

For the tamper-proof proprietary Nissan bolt, I have seen people drill out the star points on the inside of the bit and add a bite point to the rounded outside edges and then use a large tamper-proof torx bit to remove it. A small router bit on a Dremel does quick work from what I've seen on Youtube.

God-Speed · 02-08-2020, 07:43 AM

Quote:

Originally Posted by redondoaveb

I believe the tool can only be sold to an authorized nissan dealer.

Don't go to Nissan for this!!!

Quote:

Originally Posted by JARblue

A tamper-proof or vandal-proof torx bit has a hole in the middle of the bit. Easy to find. Harbor Freight has a cheap security bit set of 50 bits or something for like $10. Although the particular set I'm thinking of may not have a large enough bit for this job.

For the tamper-proof proprietary Nissan bolt, I have seen people drill out the star points on the inside of the bit and add a bite point to the rounded outside edges and then use a large tamper-proof torx bit to remove it. A small router bit on a Dremel does quick work from what I've seen on Youtube.

Like James said, you can get this at Habor Freight , Home Depot, or even PepBoys where I got my set.

redondoaveb · 02-08-2020, 10:08 AM

Quote:

Originally Posted by God-Speed

Don't go to Nissan for this!!!

Like James said, you can get this at Habor Freight , Home Depot, or even PepBoys where I got my set.

This bolt is a proprietary bolt from nissan, it is not a T-30 torx tamper proof bolt. You cannot get the tool from harbor freight, home depot or pep boys. I have a full set of tamper proof torx wrenches and none of them come close to fitting.

I tried drilling out the star section but it's hardened steel and couldn't be drilled. In order to be able to get a dremel on it I would need to destroy the trim piece attached to the steering wheel. I'm looking for that trim piece before I tear up my current one.

God-Speed · 02-08-2020, 10:11 AM

Quote:

Originally Posted by redondoaveb

This bolt is a proprietary bolt from nissan, it is not a T-30 torx tamper proof bolt. You cannot get the tool from harbor freight, home depot or pep boys. I have a full set of tamper proof torx wrenches and none of them come close to fitting.

I tried drilling out the star section but it's hardened steel and couldn't be drilled. In order to be able to get a dremel on it I would need to destroy the trim piece attached to the steering wheel. I'm looking for that trim piece before I tear up my current one.

Take a picture of it if you can.

redondoaveb · 02-08-2020, 10:12 AM

Quote:

Originally Posted by JARblue

A tamper-proof or vandal-proof torx bit has a hole in the middle of the bit. Easy to find. Harbor Freight has a cheap security bit set of 50 bits or something for like $10. Although the particular set I'm thinking of may not have a large enough bit for this job.

For the tamper-proof proprietary Nissan bolt, I have seen people drill out the star points on the inside of the bit and add a bite point to the rounded outside edges and then use a large tamper-proof torx bit to remove it. A small router bit on a Dremel does quick work from what I've seen on Youtube.

Do you have a link to the youtube video, I haven't been able to find anything.

Rusty · 02-08-2020, 01:18 PM

Here's what it looks like I think. It's no Torx. Looks like a small wheel lock.

02-07-2020, 03:31 PM	#16 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Snap-On man is your friend. redondoaveb likes this.

02-07-2020, 03:50 PM	#18 (permalink)
Ghostvette A True Z Fanatic Join Date: Aug 2013 Location: Shawnee KS Posts: 5,698 Drives: 15 Magma Red 6MT Rep Power: 2684377	I looked through the snap-on on-line catalog, I couldn't find it under the OTC number. redondoaveb likes this. __________________ 2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/

02-07-2020, 04:06 PM	#19 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,361 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	I don't know why nissan only did it on certain years. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

02-08-2020, 01:46 AM	#25 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	A tamper-proof or vandal-proof torx bit has a hole in the middle of the bit. Easy to find. Harbor Freight has a cheap security bit set of 50 bits or something for like $10. Although the particular set I'm thinking of may not have a large enough bit for this job. For the tamper-proof proprietary Nissan bolt, I have seen people drill out the star points on the inside of the bit and add a bite point to the rounded outside edges and then use a large tamper-proof torx bit to remove it. A small router bit on a Dremel does quick work from what I've seen on Youtube. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Need Steering Wheel airbag cap	moody_i	Parts for sale (Private Classifieds)	0	07-12-2015 03:50 PM
[WTB] WTB: steering wheel airbag, curtain airbag, passenger seat/airbag	Dredrizzlez	Parts for sale (Private Classifieds)	1	06-24-2015 10:11 PM
[FOR SALE] OEM steering wheel (no airbag)	RN SHARK	Parts for sale (Private Classifieds)	7	05-01-2015 08:23 AM
Steering wheel airbag	Stowell#	Wanted	2	01-19-2015 02:26 AM
[WTB] steering wheel airbag	fairz	Parts for sale (Private Classifieds)	3	06-04-2014 05:01 AM