In-cabin microfilter install on 09's?

xiven · 06-09-2010, 05:05 PM

Quote:

Originally Posted by Pushing_Tin

I'm doing this project now, the Napa 4905 only fills about half the slot, is that right? It seems like a tight fit closing up the filter box as the little plastic face that clips on has four little feet that hit the filter as I'm trying to close it.

DIY Guide?

Modshack · 06-09-2010, 05:40 PM

Quote:

Originally Posted by Pushing_Tin

I'm doing this project now, the Napa 4905 only fills about half the slot, is that right? It seems like a tight fit closing up the filter box as the little plastic face that clips on has four little feet that hit the filter as I'm trying to close it.

You need to hold it up as you close the door......>

Pushing_Tin · 06-09-2010, 05:46 PM

Okay I'm all done. I'm mildly retarded so it took about an hour. The issues I had were that the Napa filter (made in china) had all four corners that were not flush so it was nearly impossible to close the filter door. I simply trimmed the corners with some sharp scissors and and then it closed fine. Once I looked in there with a flashlight it was obvious that the filter is held above the fan with those little feet in the front and back.

The only other issue I has was reattaching the little cable that puts tension on the glove box door. All done now with no broken parts!

Pushing_Tin · 06-09-2010, 05:47 PM

Quote:

Originally Posted by Modshack

You need to hold it up as you close the door......>

Yeah I finally figured that once I looked in there with a flashlight.

Pushing_Tin · 06-09-2010, 05:50 PM

So for those with a 2010 model this is exactly the same procedure?

Spartan 1771 · 06-09-2010, 06:50 PM

Quote:

Originally Posted by Pushing_Tin

So for those with a 2010 model this is exactly the same procedure?

Yes, but the 2010 already has the filter installed from the factory..

cossie1600 · 06-09-2010, 11:19 PM

Anyone have trouble with the recirculate/fresh air motor after this mod? Mine is clicking in recirculation mode, curious to see if I screwed up something during the install

Pushing_Tin · 06-10-2010, 02:50 AM

Quote:

Originally Posted by cossie1600

Anyone have trouble with the recirculate/fresh air motor after this mod? Mine is clicking in recirculation mode, curious to see if I screwed up something during the install

I did the install in my garage while it was raining. I'll fire it up tomorrow and make sure there aren't any issues. I'd assume that your filter is not in the housing correctly and when the internals try and move the filter is in the way.

AK370Z · 06-10-2010, 03:08 AM

Anyone here used the OEM filter for the 2010?

Pushing_Tin · 06-10-2010, 03:18 AM

Quote:

Originally Posted by AK370Z

Anyone here used the OEM filter for the 2010?

And how much are they? I'd bet they are at least $40.

AK370Z · 06-10-2010, 03:22 AM

Quote:

Originally Posted by Pushing_Tin

And how much are they? I'd bet they are at least $40.

I believe it was about $26 ( I will find out for you tomorrow). Dealer told me they didn't have them on stock but if I order, it will be here in 2 days. I told the parts guy, I'll be back later. This was 3 weeks ago.

Modshack · 06-10-2010, 09:25 AM

Quote:

Originally Posted by cossie1600

Anyone have trouble with the recirculate/fresh air motor after this mod? Mine is clicking in recirculation mode, curious to see if I screwed up something during the install

Quote:

Originally Posted by Pushing_Tin

I'd assume that your filter is not in the housing correctly and when the internals try and move the filter is in the way.

Yup...The early DIY's on this used incorrectly sized (thickness) filters. Since we've come up with the right one there should not be an issue. There are rails to the rear of the compartment that hold the filter up, as do the Tabs on the door. (see my pic a few posts up). If the element is not held up it could be interfering with the fan..

AK370Z · 06-10-2010, 02:50 PM

Quote:

Originally Posted by Pushing_Tin

And how much are they? I'd bet they are at least $40.

Quote:

Originally Posted by AK370Z

I believe it was about $26 ( I will find out for you tomorrow). Dealer told me they didn't have them on stock but if I order, it will be here in 2 days. I told the parts guy, I'll be back later. This was 3 weeks ago.

Yup, $26 bucks. Ordered mine today. I'll try to do the DIY this weekend.

Pushing_Tin · 06-10-2010, 03:37 PM

Quote:

Originally Posted by AK370Z

Yup, $26 bucks. Ordered mine today. I'll try to do the DIY this weekend.

Thanks for the info, please take a picture of it when you get it. I'm curious to see the difference in quality. I paid $19 for mine at Napa.

cossie1600 · 06-10-2010, 05:32 PM

My recirculate mode was clicking because the cabin filter was so thick that it interfered with the door that goes from recirclate to open. I have to buy a smaller one, I bought a filter that was for a Maxima. It is too thick

06-09-2010, 05:46 PM	#153 (permalink)
Pushing_Tin A True Z Fanatic Join Date: Nov 2008 Location: Eugene, OR Posts: 2,875 Drives: E63 AMG Rep Power: 228	Okay I'm all done. I'm mildly retarded so it took about an hour. The issues I had were that the Napa filter (made in china) had all four corners that were not flush so it was nearly impossible to close the filter door. I simply trimmed the corners with some sharp scissors and and then it closed fine. Once I looked in there with a flashlight it was obvious that the filter is held above the fan with those little feet in the front and back. The only other issue I has was reattaching the little cable that puts tension on the glove box door. All done now with no broken parts! Last edited by Pushing_Tin; 06-09-2010 at 05:48 PM.

06-10-2010, 03:08 AM	#159 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	Anyone here used the OEM filter for the 2010? __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
In Cabin Air Filter?	caneman88	Exterior & Interior	13	08-11-2012 11:50 AM
Cabin Filter	polarity	Nissan 370Z General Discussions	11	11-11-2009 12:24 AM
Dealer Says Not Ordering '09's	Dwight Frye	Nissan 370Z Pricing / Ordering Discussions	7	08-26-2009 10:55 PM
Confused Micro-Cabin Filter on 09's or just 2010?	Asheth	Nissan 370Z General Discussions	5	08-18-2009 11:00 PM
Cabin air filter	av370	Nissan 370Z General Discussions	3	07-17-2009 09:29 PM

06-09-2010, 05:50 PM	#155 (permalink)
Pushing_Tin A True Z Fanatic Join Date: Nov 2008 Location: Eugene, OR Posts: 2,875 Drives: E63 AMG Rep Power: 228	So for those with a 2010 model this is exactly the same procedure?

06-09-2010, 11:19 PM	#157 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	Anyone have trouble with the recirculate/fresh air motor after this mod? Mine is clicking in recirculation mode, curious to see if I screwed up something during the install

06-10-2010, 05:32 PM	#165 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	My recirculate mode was clicking because the cabin filter was so thick that it interfered with the door that goes from recirclate to open. I have to buy a smaller one, I bought a filter that was for a Maxima. It is too thick