TAS2020 Debut: 78Works LED headlights and taillights

Tractionless · 04-24-2020, 10:24 PM

Quote:

Originally Posted by redondoaveb

Leo at Yuniqueled is already modifying the morimoto's.

Nice. Leo's the man, very happy with the mods he did to my OE lights. Get a great deal with him on black friday btw.

redondoaveb · 04-24-2020, 10:31 PM

Quote:

Originally Posted by Tractionless

Nice. Leo's the man, very happy with the mods he did to my OE lights. Get a great deal with him on black friday btw.

Leo's working on my 3rd set of headlights right now. He'll be doing an extra set of tail lights when the headlights are done.

cooltoy · 04-25-2020, 06:20 PM

Install video.

Is it me, or are the DRLs not that bright in the daylight?

TacoSport10 · 04-25-2020, 09:25 PM

Quote:

Originally Posted by cooltoy

Install video.

Is it me, or are the DRLs not that bright in the daylight?

It may just be the video. Mine seem plenty bright to me.

Ventruck · 04-25-2020, 11:02 PM

I can see the DRL's for sure in the reflection of other cars' rear bumpers in the daytime.

Their weakness might be they don't project at a wide angle. I figured that was inevitable with their more vertical arrangement and pretty straight orientation.

Zodiac-v2 · 04-27-2020, 12:56 AM

So I'm about to install them tomorrow. I see there is a battery tap harness, but The Retrofit Source also sent me a fuse DRL harness too (with 10A fuses).

Based on that install video by HID Express, seems like they're is just using the battery harness only. Do I just disregard the fuse tap harness then?

cooltoy · 04-27-2020, 01:06 AM

Is ti because they did not do sequential turn signal?

isayimandrew · 04-27-2020, 03:05 AM

Quote:

Originally Posted by cooltoy

Install video.

Is it me, or are the DRLs not that bright in the daylight?

Lol that’s my car

TacoSport10 · 04-27-2020, 06:58 AM

Quote:

Originally Posted by Zodiac-v2

So I'm about to install them tomorrow. I see there is a battery tap harness, but The Retrofit Source also sent me a fuse DRL harness too (with 10A fuses).

Based on that install video by HID Express, seems like they're is just using the battery harness only. Do I just disregard the fuse tap harness then?

It might be worth a call to the retrofit source to double check, but I’m thinking you can us either? Unless the wires in the battery tap harness are too small.

I’m using, and will continue to use, the battery tap harness. It makes the installation of it easier IMO. Plus it’s already installed on mine and I haven’t received the fuse tap harness yet. You will likely need to upgrade the fuse to at least a 7.5A or a 10A to match what they recommend.

If you have both, maybe take a look at the gauge wire each harness uses. If there is a difference, and the fuse tap wires arelarger, I would use that. If they’re the same, us the whichever one you want and make sure fuse is sized properly or go with retrofit source’s recommendation if you call them.

KaienZ34 · 04-27-2020, 01:41 PM

I like them, personally I wish they came with the option for non black housing. So you could really show off how nice they are and it would look more like an OEM upgrade or something. just my

KaienZ34 · 04-27-2020, 01:43 PM

Quote:

Originally Posted by isayimandrew

Lol that’s my car

Love those CS fenders.

OptionZero · 04-27-2020, 03:42 PM

Quote:

Originally Posted by KaienZ34

I like them, personally I wish they came with the option for non black housing. So you could really show off how nice they are and it would look more like an OEM upgrade or something. just my

YuniqueLED can paint them for you

cooltoy · 04-27-2020, 03:49 PM

But that means they have to open them, which might introduce leaks and probably void the warranty.

OptionZero · 04-27-2020, 05:41 PM

YuniqueLED is a professional place, they SHOULD offer protection
especially since they sell these

i'd at least give them a ring to see what sort of details they give you

redondoaveb · 04-27-2020, 06:14 PM

Quote:

Originally Posted by OptionZero

YuniqueLED is a professional place, they SHOULD offer protection
especially since they sell these

i'd at least give them a ring to see what sort of details they give you

Leo works closely with Morimoto. He's already modding these.

04-25-2020, 06:20 PM	#153 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Install video. Is it me, or are the DRLs not that bright in the daylight? eastwest2300 and Mike_O_Nite like this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang. Last edited by cooltoy; 04-25-2020 at 07:21 PM.

04-25-2020, 11:02 PM	#155 (permalink)
Ventruck Track Member Join Date: Jun 2016 Location: California Posts: 785 Drives: '13 Sport+Touring M6 Rep Power: 22898	I can see the DRL's for sure in the reflection of other cars' rear bumpers in the daytime. Their weakness might be they don't project at a wide angle. I figured that was inevitable with their more vertical arrangement and pretty straight orientation. TacoSport10 likes this.

04-27-2020, 01:06 AM	#157 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Is ti because they did not do sequential turn signal? __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

04-27-2020, 01:41 PM	#160 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	I like them, personally I wish they came with the option for non black housing. So you could really show off how nice they are and it would look more like an OEM upgrade or something. just my cooltoy likes this. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

04-27-2020, 03:49 PM	#163 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	But that means they have to open them, which might introduce leaks and probably void the warranty. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

04-27-2020, 12:56 AM	#156 (permalink)
Zodiac-v2 Base Member Join Date: Dec 2019 Location: California Posts: 13 Drives: 2010 White Nismo Rep Power: 5	So I'm about to install them tomorrow. I see there is a battery tap harness, but The Retrofit Source also sent me a fuse DRL harness too (with 10A fuses). Based on that install video by HID Express, seems like they're is just using the battery harness only. Do I just disregard the fuse tap harness then?

04-27-2020, 05:41 PM	#164 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,225 Drives: 15 370Z Nismo 6MT Rep Power: 214100	YuniqueLED is a professional place, they SHOULD offer protection especially since they sell these i'd at least give them a ring to see what sort of details they give you JARblue and cooltoy like this. __________________ OptionZero Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Both Headlights, Both taillights, and both bumpers	monaser1994	Parts for sale (Private Classifieds)	5	05-31-2015 11:05 PM
Furious 7 Debut Z Rally	Bshields22	Southern California Region	33	03-04-2015 12:05 PM
Help!!! headlights or Taillights wont turn on!	mmares94	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	2	02-16-2015 01:17 PM
Ams inc. Corporate video debut!	Wolf@AMS	AMS Motorsports	4	11-20-2012 12:23 PM
changing bulbs on headlights/taillights?	JAYNO20	Exterior & Interior	6	04-16-2012 07:20 PM