Price Check: Front Bumper Paint (Fiberglass)

Neek · 06-12-2019, 05:15 PM

I've been asking around shops in my area for a quote to get a fiberglass aftermarket front bumper painted to match the brilliant silver color (K23) and the prices seem a little high. The highest I've received is 1200 (!) and the lowest so far is 800. While I don't mind paying for a good job, is that really the average prices right now? I had a feeling it would be closer to around 500-700. I have had the feeling that these guys don't want to work on a fiberglass bumper as they said its a hassle. So maybe the price hikes are to turn me off on going with them?

Has anyone with a metallic paint code get anything repainted? Were the prices high?

OptionZero · 06-12-2019, 05:17 PM

hard for me to buy $1200 when i'm pretty sure i coulda gotten my hatch and wing painted and installed (requires glass to be removed and resealed) for about that much

Neek · 06-12-2019, 05:27 PM

Quote:

Originally Posted by OptionZero

hard for me to buy $1200 when i'm pretty sure i coulda gotten my hatch and wing painted and installed (requires glass to be removed and resealed) for about that much

yeah I asked other car friends around my area (non z owners) and they agree that the prices are high too. Just wasn't sure if our cars were special or something lol.

OptionZero · 06-12-2019, 05:29 PM

to clarify:
i have the OEM pearl white, which apparently requires some work to match since it has triple pearl something something in the coating

The silver should be cheaper; AFAIK there is nothing particularly special about the stock silver

CRiZO · 06-12-2019, 05:33 PM

To get my pearl white bumper resprayed, it was quoted around $700. That's from a quality shop.

Fiberglass ******* sucks. Dunno if you've already bought it, but I'd avoid it.

2011 Nismo#91 · 06-13-2019, 05:44 AM

Location: San Jose, CA

Probably about right at 800. Its one of the most expensive areas to live in the country.

Jayhovah · 06-13-2019, 09:13 AM

I think this heavily depends on how bad the fit of the bumper is. If bad, it is a TON of labor to get these things looking right. Did you buy a quality part or some duraflex stuff?

Neek · 06-13-2019, 10:47 AM

Quote:

Originally Posted by Jayhovah

I think this heavily depends on how bad the fit of the bumper is. If bad, it is a TON of labor to get these things looking right. Did you buy a quality part or some duraflex stuff?

rep part through shineauto

Jayhovah · 06-13-2019, 10:55 AM

Quote:

Originally Posted by Neek

rep part through shineauto

I have only heard good things about shine's fitment. If the fit is good, I would expect to find a better deal..but as the other poster mentioned, you are in SJC =)

Neek · 06-13-2019, 11:15 AM

Quote:

Originally Posted by Jayhovah

I have only heard good things about shine's fitment. If the fit is good, I would expect to find a better deal..but as the other poster mentioned, you are in SJC =)

yeahhhhh i'm reminded everyday when i look at the house prices right now

thanks for the feedback. i'm going to be bringing the bumper in to different places to get a better quote live.

Jayhovah · 06-13-2019, 11:18 AM

If the fit is dead-on-balls-accurate, you might consider painting it yourself. I have seen another member use AutomotiveTouchup spraycans and 2k clear cans to get a professional result painting a brand new bumper. I think he had to do some extra finish work to clear up orange peel from using cans, but it still looked great when he finished and was a fraction of the cost.

dts3 · 06-13-2019, 12:58 PM

Quote:

Originally Posted by Jayhovah

If the fit is dead-on-balls-accurate...

I just Watched "My Cousin Vinny" last night

Baronsmokes · 06-13-2019, 03:12 PM

Quote:

Originally Posted by Neek

I've been asking around shops in my area for a quote to get a fiberglass aftermarket front bumper painted to match the brilliant silver color (K23) and the prices seem a little high. The highest I've received is 1200 (!) and the lowest so far is 800. While I don't mind paying for a good job, is that really the average prices right now? I had a feeling it would be closer to around 500-700. I have had the feeling that these guys don't want to work on a fiberglass bumper as they said its a hassle. So maybe the price hikes are to turn me off on going with them?

Has anyone with a metallic paint code get anything repainted? Were the prices high?

Sounds about right.Matching the color is hard part.
This is assuming it was pre fit.
If I was doing it I would charge $900.00

epicjohn · 09-22-2020, 10:34 AM

Hi guys, this is my first hand experience with painting fiberglass;

I work for Epic Doors which manufactures high-performance fiberglass entry doors. We evaluated several paint suppliers including TruCoat 623, Sherwin Williams Polane 2K Acrylic, and Aquasurtech D200.

We were looking for an environmentally friendly, single component water based paint that was super durable, had great adhesion and laid down smooth.

Based upon our evaluation we selected TruCoat 623. It was much more environmentally friendly than Polane 2K and is a single component and TruCoat had better adhesion than D200 and was priced better.

axmea? · 09-23-2020, 12:07 AM

If you drive outside of SJ, you'd find it cheaper. Shops over there know, people will pay because silicone valley. Take it elsewhere. It should start at $400 a panel and depends on additional work.

06-12-2019, 05:15 PM	#1 (permalink)
Neek Base Member Join Date: Dec 2015 Location: San Jose, CA Posts: 82 Drives: 10 Nissan 370Z MT Rep Power: 10	Price Check: Front Bumper Paint (Fiberglass) I've been asking around shops in my area for a quote to get a fiberglass aftermarket front bumper painted to match the brilliant silver color (K23) and the prices seem a little high. The highest I've received is 1200 (!) and the lowest so far is 800. While I don't mind paying for a good job, is that really the average prices right now? I had a feeling it would be closer to around 500-700. I have had the feeling that these guys don't want to work on a fiberglass bumper as they said its a hassle. So maybe the price hikes are to turn me off on going with them? Has anyone with a metallic paint code get anything repainted? Were the prices high?

06-12-2019, 05:17 PM	#2 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,261 Drives: 15 370Z Nismo 6MT Rep Power: 214101	hard for me to buy $1200 when i'm pretty sure i coulda gotten my hatch and wing painted and installed (requires glass to be removed and resealed) for about that much Neek likes this. __________________ OptionZero Build Thread

06-12-2019, 05:29 PM	#4 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,261 Drives: 15 370Z Nismo 6MT Rep Power: 214101	to clarify: i have the OEM pearl white, which apparently requires some work to match since it has triple pearl something something in the coating The silver should be cheaper; AFAIK there is nothing particularly special about the stock silver Neek likes this. __________________ OptionZero Build Thread

06-12-2019, 05:33 PM	#5 (permalink)
CRiZO Track Member Join Date: Nov 2017 Location: Dallas Posts: 672 Drives: in traffic Rep Power: 20699	To get my pearl white bumper resprayed, it was quoted around $700. That's from a quality shop. Fiberglass ******* sucks. Dunno if you've already bought it, but I'd avoid it. Neek likes this.

06-13-2019, 05:44 AM	#6 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,407 Drives: slowly Rep Power: 40570	Location: San Jose, CA Probably about right at 800. Its one of the most expensive areas to live in the country. Neek likes this.

09-22-2020, 10:34 AM	#14 (permalink)
epicjohn Base Member Join Date: Jul 2020 Location: BIH Posts: 1 Drives: Nissan 350z 2020 Rep Power: 5	Hi guys, this is my first hand experience with painting fiberglass; I work for Epic Doors which manufactures high-performance fiberglass entry doors. We evaluated several paint suppliers including TruCoat 623, Sherwin Williams Polane 2K Acrylic, and Aquasurtech D200. We were looking for an environmentally friendly, single component water based paint that was super durable, had great adhesion and laid down smooth. Based upon our evaluation we selected TruCoat 623. It was much more environmentally friendly than Polane 2K and is a single component and TruCoat had better adhesion than D200 and was priced better.

09-23-2020, 12:07 AM	#15 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,243 Drives: WELL ZED PW 6MT Rep Power: 53242	If you drive outside of SJ, you'd find it cheaper. Shops over there know, people will pay because silicone valley. Take it elsewhere. It should start at $400 a panel and depends on additional work. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Paint shop says not possible to removing holograms they put in fiberglass paint job	Swindler	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	11	02-10-2020 03:21 AM
2013 Nismo front bumper paint help	Klcarp1	Southern California Region	1	05-12-2017 12:53 AM
Front bumper paint suggestions	azian	Exterior & Interior	10	11-08-2016 02:32 PM
Interest check - 2013+ Carbon Fiber lower front bumper cover	aszyd	Exterior & Interior	12	08-14-2014 01:52 PM
Price to re-paint front bumper	lhinojos	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	08-04-2013 10:25 AM