Fujimura front bumper coming

Maestro666 · 03-19-2019, 11:29 PM

Quote:

Originally Posted by cooltoy

Pics of black Fuji/Raptor. Vents used for CAI.

Nice find!!! That must be the AEM kit right? Has to be. Lines up beautifully with the intake like it was made to be there.

I might even chop the intake tube back a little so I can get a big red pod in there.

madwi · 03-19-2019, 11:41 PM

Quote:

Originally Posted by Maestro666

Nice find!!! That must be the AEM kit right? Has to be. Lines up beautifully with the intake like it was made to be there.

I might even chop the intake tube back a little so I can get a big red pod in there.

I believe that is glockworks car. maybe he/she has a build thread you can look through.

cooltoy · 03-20-2019, 08:03 AM

Quote:

Originally Posted by madwi

I believe that is glockworks car. maybe he/she has a build thread you can look through.

It is.

yaoxiao4 · 03-20-2019, 12:17 PM

one thing to note is that with the fuji bumper your factory tow hook location is no longer accessible, unless you cut the bumper

OptionZero · 03-20-2019, 01:24 PM

slightly off topic -
Wasn't there some discussion that you don't want the vent directly in front of the intake, because that actually hurts its ability to draw air due to turbulance or whatever?

It was during a discussion of cutting a vent into the bumper, but i can't recall

Maestro666 · 03-20-2019, 06:32 PM

Quote:

Originally Posted by OptionZero

slightly off topic -
Wasn't there some discussion that you don't want the vent directly in front of the intake, because that actually hurts its ability to draw air due to turbulance or whatever?

It was during a discussion of cutting a vent into the bumper, but i can't recall

Was this the result of some actual testing (with data) or just speculation?

Maestro666 · 03-20-2019, 06:40 PM

Quote:

Originally Posted by lumpia.z

Personally I badged mine because I was going for an OEM look, without the badge it looks a little empty to me. My Fujimura bumper was partial CF so two tone was the way to go for me (CF opening, CF side inlets)

How was your fitment? Was there much work to do or did it just bolt right on?

madwi · 03-20-2019, 09:07 PM

Here is some shots of the fitment straight out of the box. I dont think aftermarket gets any better than this.

( Click to show/hide )

Maestro666 · 03-21-2019, 12:02 AM

Quote:

Originally Posted by madwi

Here is some shots of the fitment straight out of the box. I dont think aftermarket gets any better than this.

( Click to show/hide )

Oh wow, you could pretty much just take it to get it painted as-is.

CRiZO · 03-21-2019, 12:22 AM

Quote:

Originally Posted by OptionZero

slightly off topic -
Wasn't there some discussion that you don't want the vent directly in front of the intake, because that actually hurts its ability to draw air due to turbulance or whatever?

It was during a discussion of cutting a vent into the bumper, but i can't recall

Correct. The only time a ram air effect would be of any use starts well past speeds and power our cars are capable of. If a car is sucking in gallons of air at 200mph, sure.

All exposed filters would do is lead to dirty filters.

nis350 · 03-21-2019, 12:29 AM

how much does this bumper cost?

madwi · 03-21-2019, 12:55 AM

~$850 for FRP and ~$1200 for CF mix.

I suggest not eating or drinking when you click on shipping quotes...

Maestro666 · 03-21-2019, 01:09 AM

Quote:

Originally Posted by CRiZO

Correct. The only time a ram air effect would be of any use starts well past speeds and power our cars are capable of. If a car is sucking in gallons of air at 200mph, sure.

All exposed filters would do is lead to dirty filters.

I don't think anybody was talking about a ram air effect, just a good source of cold air. I have seen a few tests of CAI's on dyno's where the results were improved with the bumper removed.

Dirt getting on the filters however is definitely going to be a big issue, but at least I can get the filter out through the wheel well. I could even put a dust filter behind the grill, or even a rain sock over the filter like what they use on motorbikes.

Those vents are just crying out to be used. Perhaps I'll run a pipe to the brake rotors instead.

madwi · 03-21-2019, 01:22 AM

Quote:

Originally Posted by Maestro666

I don't think anybody was talking about a ram air effect, just a good source of cold air. I have seen a few tests of CAI's on dyno's where the results were improved with the bumper removed.

Dirt getting on the filters however is definitely going to be a big issue, but at least I can get the filter out through the wheel well. I could even put a dust filter behind the grill, or even a rain sock over the filter like what they use on motorbikes.

Those vents are just crying out to be used. Perhaps I'll run a pipe to the brake rotors instead.

I was going to look into 3d printing ducts for brake cooling myself.

CRiZO · 03-21-2019, 01:57 AM

Ah, gotcha. Moving air isn't cooler, but it is better for pulling heat away. If any effort's to be made in utilizing them, brake ducts or oil coolers are the way to go for sure. That will gain more performance than a couple horsepower from intake air temps.

It's late, sorry for derailing.

03-20-2019, 01:24 PM	#20 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,229 Drives: 15 370Z Nismo 6MT Rep Power: 214100	slightly off topic - Wasn't there some discussion that you don't want the vent directly in front of the intake, because that actually hurts its ability to draw air due to turbulance or whatever? It was during a discussion of cutting a vent into the bumper, but i can't recall __________________ OptionZero Build Thread

03-20-2019, 09:07 PM	#23 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Here is some shots of the fitment straight out of the box. I dont think aftermarket gets any better than this. ( Click to show/hide ) scope22, cooltoy, Ghostvette and 3 others like this.

03-21-2019, 12:55 AM	#27 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	~$850 for FRP and ~$1200 for CF mix. I suggest not eating or drinking when you click on shipping quotes... Rusty, bushyguy and bunk like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujimura Front Bumper vs Amuse Front	Minsu	Exterior & Interior	25	04-12-2017 02:53 AM
[WTB] Fujimura front bumper & VIS AMS Hood	kjz	Parts for sale (Private Classifieds)	8	12-02-2015 12:00 AM
Finally got my Fujimura front bumper	Amj2020	Nissan 370Z General Discussions	33	10-30-2014 04:22 PM
[WTB] Fujimura front bumper.	Arrvaxx	Parts for sale (Private Classifieds)	14	11-12-2013 03:27 PM
Pic Request: Fujimura front bumper w/ Amuse rear bumper	Wonka2581	Exterior & Interior	10	04-26-2013 07:43 AM

03-20-2019, 12:17 PM	#19 (permalink)
yaoxiao4 Enthusiast Member Join Date: Feb 2017 Location: Bay Area Posts: 320 Drives: 13 370z Black M6 Rep Power: 8	one thing to note is that with the fuji bumper your factory tow hook location is no longer accessible, unless you cut the bumper

03-21-2019, 12:29 AM	#26 (permalink)
nis350 A True Z Fanatic Join Date: Oct 2014 Location: socal Posts: 1,107 Drives: 370z Rep Power: 13435	how much does this bumper cost?

03-21-2019, 01:57 AM	#30 (permalink)
CRiZO Track Member Join Date: Nov 2017 Location: Dallas Posts: 672 Drives: in traffic Rep Power: 20699	Ah, gotcha. Moving air isn't cooler, but it is better for pulling heat away. If any effort's to be made in utilizing them, brake ducts or oil coolers are the way to go for sure. That will gain more performance than a couple horsepower from intake air temps. It's late, sorry for derailing.