ECUTek Dashboard (Gauges)

The Weapon

I haven't seen much online in regards to custom dashboards within the ECUTek app. Was wondering if anyone else has played around with it or created any custom setups? Here's a couple versions i worked on. One is my phone and the other is my tablet with a temporary mounting solution.

Phone Screen Capture:


Tablet Screen Capture:


Phone Mounted:


Tablet Mounted:


Link to Tablet File:
https://1drv.ms/u/s!AmpvvSE5gpadqRc4...G2BSH?e=tzpMHc

Link to Phone File:
(this file was lost)

__________________
Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P

Krylon

Looks great! I didn't even know you could do this. I don't have ecutek connect yet though. Would you be willing to share your dashboards?

The Weapon

absolutely. I'll add a link to my dashboard files above.

__________________
Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P

JCarter370z

I’ve been messing with mine, your link doesn’t work. How do you upload them?

The Weapon

they are on my one drive. the link might expire after a whle. i've updated it on the original thread. I thought i set to never expire.

__________________
Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P

blueranger

Did you create this with Ecutek Connect?

__________________
F.I. Stage 1 Twin Turbo #48 | E85 FlexFuel | Built 7AT | F.I. 34 Row Oil Cooler | F.I. Flex Plate | F.I. 19 row Trans Cooler | MT ET Street S/S | ECUTEK Tuned by Seb | RPM Roll Bar

The Weapon

Yes. The gauge and numbers, everything else is just a background I created. Placed the gauges over the background I created in Adobe Illustrator.

__________________
Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P

Tractionless

Welp, I guess it's time to get a bluetooth dongle. If I already have a laptop cable and dongle can I just add on the bluetooth setup for logging on an Android tablet?

__________________
Toys Not Tots

NorthStyle

That's correct. Same thing I did.

Tractionless

So did you get both the Bluetooth and another dongle?

__________________
Toys Not Tots

Netguru3278

Can you please send me the Tablet File, or teach me How to setup a boost gauge?

The Weapon

Your tuner needs to program it in your tune otherwise you use MAP sensor.

__________________
Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P

Netguru3278

Race Rom is loaded I just need to add a Map Sensor and rename it to boost and change the unit measure to PSI ?

The Weapon

Ideally your tuner can create a custom input for the gauge. The MAP sensor will display atmospheric pressure 14.7 psi at 0 psi, anything in vacuum will be <14.7 AP. For 7.3 psi boost it will read 22 psi and so on.

If you are fine using that then that's the closest to a boost gauge you can get without custom gauge input programming.

My EDC file uses a couple custom inputs for gauges on E85, boost guage which is (MAP-AP)and boost control duty cycle. Every tuner is different and every tune is different so my custom inputs may not be the same as yours.

__________________
Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P

Lvcky69

for some reason the ecutek dashboard doesn't allow the gauges to be displayed in landscape mode, only portrait. Which to me it is pretty dumb