Nismo APR front splitter question

Rusty · 01-17-2019, 03:56 PM

Called APR today. They said that they don't use a filler between the bumper and splitter. The only thing they do is use a spacer at the bolt holes to keep things from deforming.

NextLevel · 01-29-2019, 12:40 PM

Sorry bro that I'm just seeing this. We were actually the first to start running splitters on the 09-14 fronts. No one manufactured one at the time so we came out with our own.

Anyways, for install, we 100% always recommend mating it with the Zspeed aluminum undertray. Reason for this is to add additional support and mounting locations. There are very few mounting locations under the z from the oil pan all the way to the front of the bottom of the bumper/valence.

For most support, but the rear side of the splitter to fit around the the zspeed vent, and the rest will be above the zspeed.

Under the bumper we started back in 2011 by using plastic washer, 1/2" in the 2 centers, and 3/8" on teh outters which you can shave down to an angle to fit the curve perfect. THIS we actually found functional which helped pull air creating a duct inlet straight to your oil cooler or radiator. Win win right?

We have been using our NLTA splitter now for 6 years, still on the first one and its lived up to the abuse.

Please DM me directly or reach out anytime with any questions you guys may have. We support both our splitter as well as APR's. APR's is a big more aggressive then ours.

NextLevel · 01-29-2019, 12:44 PM

As most, i've never been a fan of how the nismo front curves up on the bottom, so I went ahead and modified the front (since we had to to comply w/ the Varis fenders being 10mm wider), and we cut and poly fused it smooth.

Rusty · 01-29-2019, 03:51 PM

Quote:

Originally Posted by NextLevel

Sorry bro that I'm just seeing this. We were actually the first to start running splitters on the 09-14 fronts. No one manufactured one at the time so we came out with our own.

Anyways, for install, we 100% always recommend mating it with the Zspeed aluminum undertray. Reason for this is to add additional support and mounting locations. There are very few mounting locations under the z from the oil pan all the way to the front of the bottom of the bumper/valence.

For most support, but the rear side of the splitter to fit around the the zspeed vent, and the rest will be above the zspeed.

Under the bumper we started back in 2011 by using plastic washer, 1/2" in the 2 centers, and 3/8" on teh outters which you can shave down to an angle to fit the curve perfect. THIS we actually found functional which helped pull air creating a duct inlet straight to your oil cooler or radiator. Win win right?

We have been using our NLTA splitter now for 6 years, still on the first one and its lived up to the abuse.

Please DM me directly or reach out anytime with any questions you guys may have. We support both our splitter as well as APR's. APR's is a big more aggressive then ours.

This is exactly what I was looking for.

Thank you.

Rusty · 01-29-2019, 03:56 PM

Quote:

Originally Posted by NextLevel

As most, i've never been a fan of how the nismo front curves up on the bottom, so I went ahead and modified the front (since we had to to comply w/ the Varis fenders being 10mm wider), and we cut and poly fused it smooth.

I'm not a fan of that raised center section myself. If I was a bodyman. I would do like you did.

01-17-2019, 03:56 PM	#16 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,220 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Called APR today. They said that they don't use a filler between the bumper and splitter. The only thing they do is use a spacer at the bolt holes to keep things from deforming. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-29-2019, 12:40 PM	#17 (permalink)
NextLevel Banned Join Date: Apr 2017 Location: Midwest Posts: 108 Drives: Motorweek#0021 Nismo Rep Power: 0	Sorry bro that I'm just seeing this. We were actually the first to start running splitters on the 09-14 fronts. No one manufactured one at the time so we came out with our own. Anyways, for install, we 100% always recommend mating it with the Zspeed aluminum undertray. Reason for this is to add additional support and mounting locations. There are very few mounting locations under the z from the oil pan all the way to the front of the bottom of the bumper/valence. For most support, but the rear side of the splitter to fit around the the zspeed vent, and the rest will be above the zspeed. Under the bumper we started back in 2011 by using plastic washer, 1/2" in the 2 centers, and 3/8" on teh outters which you can shave down to an angle to fit the curve perfect. THIS we actually found functional which helped pull air creating a duct inlet straight to your oil cooler or radiator. Win win right? We have been using our NLTA splitter now for 6 years, still on the first one and its lived up to the abuse. Please DM me directly or reach out anytime with any questions you guys may have. We support both our splitter as well as APR's. APR's is a big more aggressive then ours. Rusty, cooltoy, Hotrodz and 2 others like this.

01-29-2019, 12:44 PM	#18 (permalink)
NextLevel Banned Join Date: Apr 2017 Location: Midwest Posts: 108 Drives: Motorweek#0021 Nismo Rep Power: 0	As most, i've never been a fan of how the nismo front curves up on the bottom, so I went ahead and modified the front (since we had to to comply w/ the Varis fenders being 10mm wider), and we cut and poly fused it smooth. DarkJak, Rusty, cooltoy and 3 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] 09-12 Nismo OEM Front Under Splitter	mfeinst	Parts for sale (Private Classifieds)	0	09-21-2016 04:05 PM
Nismo carbon fiber front lip or splitter 370z	zmanelite	Nissan 370Z General Discussions	3	07-06-2015 09:39 AM
[WTB] Nismo front splitter (F2026-1A47A)	zdo5915	Parts for sale (Private Classifieds)	1	09-13-2014 03:01 AM
[FOR SALE] Nismo front oem brand new with splitter. $600	dirTy_shoeZ	Parts for sale (Private Classifieds)	36	12-31-2013 10:54 AM
Nismo Front Splitter?	scruffydog	Exterior & Interior	35	03-29-2013 07:36 PM