add on spoiler for 2015+ nismo

mlsully · 02-14-2019, 09:45 PM

Since my piece comes off easy, I’ll test it tomorrow when mine comes in and let everyone know if it makes a difference in the way it fits. Saves you from having to do it if not really needed and just ends up being a crappy mold of the product that needs some other sort of tweaking. Was really hoping for a part that fit like the pictures.

Own3d · 02-15-2019, 12:12 AM

Quote:

Originally Posted by mlsully

Since my piece comes off easy, I’ll test it tomorrow when mine comes in and let everyone know if it makes a difference in the way it fits. Saves you from having to do it if not really needed and just ends up being a crappy mold of the product that needs some other sort of tweaking. Was really hoping for a part that fit like the pictures.

In for results. Interested in seeing it!

solidus · 02-15-2019, 11:53 AM

Quote:

Originally Posted by Niksmo

I tried test fitting it and the wing doesn't sit flat though. The tiny add on Piece on the stock wing probably needs to come off.

Lol!! I got anxious and installed mine. That piece needed to come off to sit flat but once again I was reminded that I need to slow the hell down. I overdid the 3m on the forward edges and they sit up. Looks good but it's up near those forward points and not flat. So I'll need to pull it and do it again. Still looks awesome just a job done by someone obviously not in the bodywork field.

God-Speed · 02-15-2019, 12:29 PM

Quote:

Originally Posted by solidus

Lol!! I got anxious and installed mine. That piece needed to come off to sit flat but once again I was reminded that I need to slow the hell down. I overdid the 3m on the forward edges and they sit up. Looks good but it's up near those forward points and not flat. So I'll need to pull it and do it again. Still looks awesome just a job done by someone obviously not in the bodywork field.

Solidus, post pictures to help show and describe the edges and how it sits now.

Thanks Brian

qtrskills · 02-15-2019, 02:52 PM

I feel skeptical about 3m tape holding it on high speed

God-Speed · 02-15-2019, 03:02 PM

Quote:

Originally Posted by qtrskills

I feel skeptical about 3m tape holding it on high speed

It has to be a combination of both 3M tape and adhesive together.

mlsully · 02-15-2019, 03:27 PM

ok, I just started test fitting mine. I took off the factory wiglet, definitely sits better that way. There is roughly a 1/4 gap underneath between the new wing and the original. If you push it forward too much to close that gap, then the top corners want to pop up. May need to do some sanding on the bottom side to get it to fit tighter, but doesnt look like theres much material to sand. I'll post some pictures in a few.

mlsully · 02-15-2019, 03:37 PM

This is just resting in there. Pushing forward I can close the gap more. The the small strip of tape it comes with definitely won’t be enough to hold it. You will have to use some epoxy (maybe why he suggested silicon) and maybe a bit more tape on the sides.

solidus · 02-15-2019, 04:02 PM

Quote:

Originally Posted by mlsully

This is just resting in there. Pushing forward I can close the gap more. The the small strip of tape it comes with definitely won’t be enough to hold it. You will have to use some epoxy (maybe why he suggested silicon) and maybe a bit more tape on the sides.

My edges sit up maybe 1/8th inch more than what yours shows but I'm closer in the back. I actually drove it doing some WOT logs today and there's no doubt the 3M will hold it. I pull from the back upward and it lifts the car.

solidus · 02-15-2019, 04:04 PM

Quote:

Originally Posted by God-Speed

Solidus, post pictures to help show and describe the edges and how it sits now.

Thanks Brian

Bro, I feel almost like showing up at the emergency room with dirty underwear on that idea. Lol!! I'll do it in the interest of the team. I like this wing and if I have to have it done at a bodyshop it's worth it. Of note for everyone , it does tighten up the field of view in the back. Still worth it.

mlsully · 02-15-2019, 04:15 PM

Well, it’s mounted. Added a small strip of double sided tape to the edges and some 3M epoxy to the top corners. I couldn’t push it in any further without the front corners popping up. May have to do with the tape on the sides. Guess I’ll live with it for now.

mlsully · 02-15-2019, 04:17 PM

Ignore the tape across the whole back lip, it doesn’t even touch lol

God-Speed · 02-15-2019, 04:27 PM

Mlsully, Thanks for posting the pictures.

qtrskills · 02-16-2019, 10:50 AM

Hey mlsully, more pictures pl0x?

NorthStyle · 02-16-2019, 04:26 PM

I'd have jumped on this if I could've found someone wanting to swap Nismo hatches. Maybe I'll just buy one from a wrecker methinks...

02-14-2019, 09:45 PM	#151 (permalink)
mlsully Base Member Join Date: Jan 2017 Location: Baton Rouge Posts: 175 Drives: 2015 Nismo Rep Power: 43	Since my piece comes off easy, I’ll test it tomorrow when mine comes in and let everyone know if it makes a difference in the way it fits. Saves you from having to do it if not really needed and just ends up being a crappy mold of the product that needs some other sort of tweaking. Was really hoping for a part that fit like the pictures. God-Speed, Own3d and qtrskills like this. __________________ 2015 370z Nismo 7AT. Tein Flex Coilovers, Stillen Gen 3 Intake, Fast Intentions Test Pipes and Exhaust, APR Splitter, Vossen CV5 Wheels, Tuned by Seb

02-15-2019, 03:27 PM	#157 (permalink)
mlsully Base Member Join Date: Jan 2017 Location: Baton Rouge Posts: 175 Drives: 2015 Nismo Rep Power: 43	ok, I just started test fitting mine. I took off the factory wiglet, definitely sits better that way. There is roughly a 1/4 gap underneath between the new wing and the original. If you push it forward too much to close that gap, then the top corners want to pop up. May need to do some sanding on the bottom side to get it to fit tighter, but doesnt look like theres much material to sand. I'll post some pictures in a few. __________________ 2015 370z Nismo 7AT. Tein Flex Coilovers, Stillen Gen 3 Intake, Fast Intentions Test Pipes and Exhaust, APR Splitter, Vossen CV5 Wheels, Tuned by Seb

02-15-2019, 04:27 PM	#163 (permalink)
God-Speed A True Z Fanatic Join Date: Sep 2010 Location: Austin, Tx. Posts: 4,365 Drives: Prototype Rep Power: 2684377	Mlsully, Thanks for posting the pictures. mlsully likes this.

02-16-2019, 10:50 AM	#164 (permalink)
qtrskills Base Member Join Date: Nov 2015 Location: Qa Posts: 26 Drives: 14 7AT Rep Power: 35	Hey mlsully, more pictures pl0x? Smashley likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] FREE 2015+ Nismo Spoiler, FREE 2015+ Nismo interior pieces, FREE 15/20 Z1 spacers	zeus37	Parts for sale (Private Classifieds)	23	10-06-2018 05:18 PM
2015+ nismo spoiler extensions or add ons???	UNKNOWN_370	Exterior & Interior	8	03-21-2017 03:09 PM
[WTB] 2015+ Nismo spoiler	khern11	Parts for sale (Private Classifieds)	1	09-05-2016 08:07 PM
2015 nismo spoiler install	Spaggettio	Exterior & Interior	8	09-01-2016 12:27 AM
2014 NISMO Spoiler on 2015 Base	mpqholygrail	Exterior & Interior	5	06-08-2015 01:29 PM

02-15-2019, 02:52 PM	#155 (permalink)
qtrskills Base Member Join Date: Nov 2015 Location: Qa Posts: 26 Drives: 14 7AT Rep Power: 35	I feel skeptical about 3m tape holding it on high speed

02-16-2019, 04:26 PM	#165 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,258 Drives: 2011 370Z Nismo Rep Power: 24277	I'd have jumped on this if I could've found someone wanting to swap Nismo hatches. Maybe I'll just buy one from a wrecker methinks...