gt3rs style door pulls

NorthStyle · 11-06-2018, 09:52 AM

If you can work with fiberglass (or putty/carbon/etc.) it looks like it would be fairly easy to duplicate: remove the handle, glass over the recess, cut a slit for the door pull strap (I'd probably use a grommet or something similar to reduce wear), smooth everything out, paint and find a method to connect the strap to the door release latch... not really that complex so long as you have the basic skills for all steps involved.

I think it'd look nice if done correctly however you'd most likely lose the ability to lock your doors from the inside of the vehicle, but that could be worked around as well.

Spartan 1771 · 11-06-2018, 11:20 AM

They may not be my style, but if this is something you like and want it for your build, I encourage you to investigate it further. If you have the skills necessary to produce a clean looking product that works well and solves the interior locking issue, I'm sure others would also be interested in this. There have been several forum members over the years who have fabricated quality modifications and now sell them on here and on eBay, such as "GaleForce" and "Synolimit". Maybe you could do the same?

justin_boy · 11-06-2018, 03:00 PM

Quote:

Originally Posted by Spartan 1771

They may not be my style, but if this is something you like and want it for your build, I encourage you to investigate it further. If you have the skills necessary to produce a clean looking product that works well and solves the interior locking issue, I'm sure others would also be interested in this. There have been several forum members over the years who have fabricated quality modifications and now sell them on here and on eBay, such as "GaleForce" and "Synolimit". Maybe you could do the same?

haha my dude i am so not handy

justin_boy · 11-06-2018, 03:02 PM

Quote:

Originally Posted by NorthStyle

If you can work with fiberglass (or putty/carbon/etc.) it looks like it would be fairly easy to duplicate: remove the handle, glass over the recess, cut a slit for the door pull strap (I'd probably use a grommet or something similar to reduce wear), smooth everything out, paint and find a method to connect the strap to the door release latch... not really that complex so long as you have the basic skills for all steps involved.

I think it'd look nice if done correctly however you'd most likely lose the ability to lock your doors from the inside of the vehicle, but that could be worked around as well.

I wish i had basic skills

madwi · 11-06-2018, 06:54 PM

Quote:

Originally Posted by justin_boy

haha my dude i am so not handy

justin_boy · 11-07-2018, 09:15 AM

Quote:

Originally Posted by madwi

shiet at least im handsoap

cv129 · 11-07-2018, 02:19 PM

Quote:

Originally Posted by justin_boy

shiet at least im handsoap

Lead with that when you go on dates

11-06-2018, 11:20 AM	#17 (permalink)
Spartan 1771 A True Z Fanatic Join Date: Nov 2009 Location: Western Maryland Posts: 1,280 Drives: Wife crazy & 09 370Z Rep Power: 105454	They may not be my style, but if this is something you like and want it for your build, I encourage you to investigate it further. If you have the skills necessary to produce a clean looking product that works well and solves the interior locking issue, I'm sure others would also be interested in this. There have been several forum members over the years who have fabricated quality modifications and now sell them on here and on eBay, such as "GaleForce" and "Synolimit". Maybe you could do the same? __________________ ~Rob -DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on... Last edited by Spartan 1771; 11-06-2018 at 11:40 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Car pulls to the left	neuro512	Brakes & Suspension	15	10-25-2016 09:54 AM
Z pulls to right while shifting	BlackZMamba	Nissan 370Z General Discussions	10	06-27-2016 03:25 PM
Wes_R x GT3RS (89 pics)	Wes_R	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	9	09-16-2013 07:24 PM
Forged Performance: GT-R, GT3RS, Viper and Aventador Wallpapers	ChadB@Forged	Member's 370Z Gallery	9	01-24-2012 06:46 PM
911 gt3rs 4.0	zuperman 370	Other Vehicles	13	06-08-2011 05:51 AM

11-06-2018, 09:52 AM	#16 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,256 Drives: 2011 370Z Nismo Rep Power: 24277	If you can work with fiberglass (or putty/carbon/etc.) it looks like it would be fairly easy to duplicate: remove the handle, glass over the recess, cut a slit for the door pull strap (I'd probably use a grommet or something similar to reduce wear), smooth everything out, paint and find a method to connect the strap to the door release latch... not really that complex so long as you have the basic skills for all steps involved. I think it'd look nice if done correctly however you'd most likely lose the ability to lock your doors from the inside of the vehicle, but that could be worked around as well.