Coolerworx Shifter Assembly (Dealers)

redondoaveb · 12-08-2020, 11:40 PM

Quote:

Originally Posted by BettyZ

Hahahaha thank you for educating me on the subject matter. Before this, the sum of my knowledge on SCs was that yours went kablooey after like, 60 miles.

Sent from my SM-G955U using Tapatalk

And I was so far ahead of your car at the time, you still haven't caught me.

By the way, I've had that supercharger since 2017. It had at least 100 miles on it.

BettyZ · 12-09-2020, 02:23 PM

Took a gander under the Z. I have the o-ring already. So that isn't the source of the rattle. I'mma grease up the insert and we'll see what happens...

Rusty · 12-09-2020, 02:27 PM

Quote:

Originally Posted by BettyZ

Took a gander under the Z. I have the o-ring already. So that isn't the source of the rattle. I'mma grease up the insert and we'll see what happens...

How was sex with the tranny last night? Did you blow a seal?

Leingod · 12-09-2020, 02:30 PM

Quote:

Originally Posted by Rusty

How was sex with the tranny last night? Did you blow a seal?

Something about dropping his flywheel

redondoaveb · 12-09-2020, 02:32 PM

Quote:

Originally Posted by BettyZ

Took a gander under the Z. I have the o-ring already. So that isn't the source of the rattle. I'mma grease up the insert and we'll see what happens...

Although you set yourself up for a snarky comment, I'm going to stay on topic

Grease the pin also.

BettyZ · 12-09-2020, 06:47 PM

Quote:

Originally Posted by redondoaveb

Although you set yourself up for a snarky comment, I'm going to stay on topic

Grease the pin also.

Bro, that pin is SO greased.

BettyZ · 12-09-2020, 06:48 PM

Quote:

Originally Posted by Rusty

How was sex with the tranny last night? Did you blow a seal?

Switchblade, you were there bro. Blacked out again, huh?

redondoaveb · 12-09-2020, 07:26 PM

Quote:

Originally Posted by BettyZ

Bro, that pin is SO greased.

I could see how the insert could be a source of the rattle

BettyZ · 12-09-2020, 10:31 PM

Quote:

Originally Posted by redondoaveb

I could see how the insert could be a source of the rattle

I should clarify, I greased it after I inspected the bottom of the shifter. It was not previously greased.

redondoaveb · 12-09-2020, 11:23 PM

Quote:

Originally Posted by BettyZ

I should clarify, I greased it after I inspected the bottom of the shifter. It was not previously greased.

Does it fit tight up into the shifter?

BettyZ · 12-10-2020, 12:24 AM

Quote:

Originally Posted by redondoaveb

Does it fit tight up into the shifter?

It fit semi-snugly into the shifter before I lubed it up. There were no obvious-by-feel gapping issues. The insert slid smoothly into and out of the shifter without effort. When I put this hot mess all back together I'll grease up the bolt as well as the sides of the shifter where it mates with the linkage and we'll see if that calms it down.

And yes, all of the above statements are also relevant to any sex acts involving yall's wildly-varied yet equally disgusting perversions - looking at you, Mike/James aka the poor white man's version of Mike Jones.

Rusty · 12-10-2020, 04:50 AM

?

Quote:

Originally Posted by BettyZ

It fit semi-snugly into the shifter before I lubed it up. There were no obvious-by-feel gapping issues. The insert slid smoothly into and out of the shifter without effort. When I put this hot mess all back together I'll grease up the bolt as well as the sides of the shifter where it mates with the linkage and we'll see if that calms it down.

And yes, all of the above statements are also relevant to any sex acts involving yall's wildly-varied yet equally disgusting perversions - looking at you, Mike/James aka the poor white man's version of Mike Jones.

When you talk about Mike/James. You mean this?

Leingod · 12-10-2020, 08:05 AM

Quote:

Originally Posted by Rusty

?
When you talk about Mike/James. You mean this?

I learned it from you. I hear wind is the only sound you can make anymore.

edub370 · 12-10-2020, 03:00 PM

i'm anxious to see if this works

Rusty · 12-10-2020, 03:49 PM

Quote:

Originally Posted by edub370

i'm anxious to see if this works

Me too.

12-09-2020, 02:23 PM	#152 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 38 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Took a gander under the Z. I have the o-ring already. So that isn't the source of the rattle. I'mma grease up the insert and we'll see what happens... JARblue, Hotrodz and redondoaveb like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

12-10-2020, 03:00 PM	#164 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	i'm anxious to see if this works __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coolerworx shifter	redondoaveb	Engine & Drivetrain	97	05-19-2020 04:24 PM
Aftermarket 370Z shifter handle and shifter knobs for automatic transmissions	Quicksilvers	Exterior & Interior	17	03-25-2018 10:48 AM
What is the best short-throw shifter and shifter knob combo?	ZInferno0248	Nissan 370Z General Discussions	79	03-06-2017 07:57 AM
[WTB] Factory Shifter Assembly or just the white snap on mount bushing	theZspot	Parts for sale (Private Classifieds)	0	01-29-2015 01:44 AM
[WTB] Stock Shifter assembly.	rinaudo	Parts for sale (Private Classifieds)	1	08-03-2012 04:03 AM