Coolerworx Shifter Assembly (Dealers)

justin_boy · 02-20-2020, 11:30 PM

Quote:

Originally Posted by trangalang

Hate to revive an old thread, but I just installed my Coolerworx shifter last week with the revised V2 plate that's designed for the 370z. No need to drill any holes! Although I do recommend purchasing new M6 bolts as the OEM bolts will only hold the mounting plate in place by 3 or so threads.

One issue that I did run into - the rubber dust boot that covers the linkage underneath the car will not remain in place, as it is originally held up by the shifter bracket/brace that is removed when the Coolerworx unit is installed.

I started feeling vibration in 2nd gear but it eventually smoothed out as I crawled to a stop. This was from the dust boot dangling freely and dragging itself against the driveshaft.

@NorthStyle - Not sure if you ran into this issue as well. But I looked at your photos and it looks like you re-installed the linkage but chose to not install the dust boot cover?

Okay so just ran to home depot and bought both m6 10x25mm bolts and m6 10x20 mm bolts

Which is better to run instead of the oem for the shifter plate?

Overlimit · 03-25-2020, 01:50 AM

Just wondering, is anyone still experiencing rattling with this shifter? Has anyone been able to remedy the rattling?

BettyZ · 09-14-2020, 12:24 AM

Quote:

Originally Posted by Overlimit

Just wondering, is anyone still experiencing rattling with this shifter? Has anyone been able to remedy the rattling?

Yes. The rattling is horrible. 3rd and 4th gear after 3k rpm, the reverse lockout internal cable is rattling/vibrating the hell out of its external. I contacted coolerworx twice and received no response. The rattle legitimately makes the Z undriveable in 3rd and 4th gear; the sound is beyond distracting and into the realm of "drives you batsh*t."

I'm pulling this trash shifter out and installing something that doesn't make me want to tear my ears off. It's a damn shame bc aside from the rattle the shifter is great.

Sent from my SM-G955U using Tapatalk

NorthStyle · 09-15-2020, 02:09 PM

Quote:

Originally Posted by Overlimit

Just wondering, is anyone still experiencing rattling with this shifter? Has anyone been able to remedy the rattling?

I'm pretty sure mine does it every now and then... but after having it so long I either subconsciously tune it out or my music drowns it out.

JARblue · 09-15-2020, 04:39 PM

Quote:

Originally Posted by BettyZ

Yes. The rattling is horrible. 3rd and 4th gear after 3k rpm, the reverse lockout internal cable is rattling/vibrating the hell out of its external. I contacted coolerworx twice and received no response. The rattle legitimately makes the Z undriveable in 3rd and 4th gear; the sound is beyond distracting and into the realm of "drives you batsh*t."

I'm pulling this trash shifter out and installing something that doesn't make me want to tear my ears off. It's a damn shame bc aside from the rattle the shifter is great.

I'll take it

justin_boy · 09-15-2020, 05:40 PM

does anyones shaft (not knob) get really hot while driving?

had to hold back while writing this lol

madwi · 09-15-2020, 05:53 PM

Quote:

Originally Posted by justin_boy

does anyones shaft (not knob) get really hot while driving?

had to hold back while writing this lol

Not burn your hand hot but warm.

BettyZ · 09-15-2020, 06:03 PM

Quote:

Originally Posted by justin_boy

does anyones shaft (not knob) get really hot while driving?

had to hold back while writing this lol

it gets warm but not painfully.

Sent from my SM-G955U using Tapatalk

Rusty · 09-15-2020, 07:00 PM

Quote:

Originally Posted by JARblue

I'll take it

Think you would take a used condom if you thought it didn't have any holes in it.

JARblue · 09-15-2020, 07:49 PM

Quote:

Originally Posted by Rusty

Think you would take a used condom if you thought it didn't have any holes in it.

Why does that matter?

Rusty · 09-15-2020, 08:08 PM

Quote:

Originally Posted by JARblue

Why does that matter?

Why would you want a lunch bag that leaks?

JARblue · 09-15-2020, 08:13 PM

Quote:

Originally Posted by Rusty

Why would you want a lunch bag that leaks?

That's not really a good comparison. More like borrowing someone's cooler and then your lunch leaks all in it. Why do I care as long as I can still eat my lunch? Not my cooler.

Rusty · 09-15-2020, 08:25 PM

Quote:

Originally Posted by JARblue

That's not really a good comparison. More like borrowing someone's cooler and then your lunch leaks all in it. Why do I care as long as I can still eat my lunch? Not my cooler.

I take it you never heard the joke I'm thinking about.

I would post it here. But I would get banned.

JARblue · 09-15-2020, 08:38 PM

Quote:

Originally Posted by Rusty

I take it you never heard the joke I'm thinking about.

I would post it here. But I would get banned.

You have my number

Rusty · 09-15-2020, 08:48 PM

Quote:

Originally Posted by JARblue

You have my number

You got a PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coolerworx shifter	redondoaveb	Engine & Drivetrain	97	05-19-2020 03:24 PM
Aftermarket 370Z shifter handle and shifter knobs for automatic transmissions	Quicksilvers	Exterior & Interior	17	03-25-2018 09:48 AM
What is the best short-throw shifter and shifter knob combo?	ZInferno0248	Nissan 370Z General Discussions	79	03-06-2017 06:57 AM
[WTB] Factory Shifter Assembly or just the white snap on mount bushing	theZspot	Parts for sale (Private Classifieds)	0	01-29-2015 12:44 AM
[WTB] Stock Shifter assembly.	rinaudo	Parts for sale (Private Classifieds)	1	08-03-2012 03:03 AM

03-25-2020, 01:50 AM	#77 (permalink)
Overlimit Base Member Join Date: Jun 2010 Location: 951 Posts: 151 Drives: F80 M3 Rep Power: 33	Just wondering, is anyone still experiencing rattling with this shifter? Has anyone been able to remedy the rattling?

09-15-2020, 05:40 PM	#81 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8368	does anyones shaft (not knob) get really hot while driving? had to hold back while writing this lol