Coolerworx Shifter Assembly (Dealers)

Rusty · 12-02-2020, 11:38 PM

Quote:

Originally Posted by Leingod

Started a new pre workout formula. So.... Yes

Roid rage anyone?

redondoaveb · 12-08-2020, 11:38 AM

Ok, so I got a response from Coolerworx. As a test, they suggest applying grease to the insert and pin as shown in the pic and see if it quiets it down some or completely. If so, the believe they have a fix. I also noticed that in their picture, they have a rubber o ring on the pin that goes into the shifter shaft. I don't believe mine had it and in previous pics in this thread, I don't see one either. Coolerworx said it didn't come on the earlier model. I wonder if this could be the source of the rattling? The pin is held into the shifter shaft by a set screw. Maybe the o ring helps it fit tighter to the bottom of the shaft and it wouldn't be metal on metal. Maybe someone can source an o ring from a hardware store and try that first and see if it cures the rattling. If not, then try applying grease to the pin and insert and see what happens.

BettyZ · 12-08-2020, 07:53 PM

Quote:

Originally Posted by redondoaveb

Ok, so I got a response from Coolerworx. As a test, they suggest applying grease to the insert and pin as shown in the pic and see if it quiets it down some or completely. If so, the believe they have a fix. I also noticed that in their picture, they have a rubber o ring on the pin that goes into the shifter shaft. I don't believe mine had it and in previous pics in this thread, I don't see one either. Coolerworx said it didn't come on the earlier model. I wonder if this could be the source of the rattling? The pin is held into the shifter shaft by a set screw. Maybe the o ring helps it fit tighter to the bottom of the shaft and it wouldn't be metal on metal. Maybe someone can source an o ring from a hardware store and try that first and see if it cures the rattling. If not, then try applying grease to the pin and insert and see what happens.

I'm on it. Be a while to test tho as the trans is out of the car.

Sent from my SM-G955U using Tapatalk

redondoaveb · 12-08-2020, 08:04 PM

Quote:

Originally Posted by BettyZ

I'm on it. Be a while to test tho as the trans is out of the car.

Sent from my SM-G955U using Tapatalk

That'll make access easier

Why is the trans out of the car?

Rusty · 12-08-2020, 08:52 PM

Quote:

Originally Posted by redondoaveb

That'll make access easier

Why is the trans out of the car?

He's having sex with a tranny.

Leingod · 12-08-2020, 08:52 PM

Quote:

Originally Posted by Rusty

He's having sex with a tranny.

I audibly laughed.... It was so easy

BettyZ · 12-08-2020, 08:53 PM

Quote:

Originally Posted by Rusty

He's having sex with a tranny.

Who am I, E-fatazz-W?

BettyZ · 12-08-2020, 08:55 PM

Quote:

Originally Posted by redondoaveb

That'll make access easier

Why is the trans out of the car?

Well, there was this spring clamp rattling around a coolant pipe in the rear of the motor and I couldn't get to it from above so...

That and the stage 3 clutch and upgraded CMAK.

redondoaveb · 12-08-2020, 09:13 PM

Quote:

Originally Posted by BettyZ

Well, there was this spring clamp rattling around a coolant pipe in the rear of the motor and I couldn't get to it from above so...

That and the stage 3 clutch and upgraded CMAK.

What clutch did you go with?

BettyZ · 12-08-2020, 09:58 PM

Quote:

Originally Posted by redondoaveb

What clutch did you go with?

South Bend Clutch Stage 3 Daily Quiet Clutch Kit 530TQ

redondoaveb · 12-08-2020, 10:28 PM

Quote:

Originally Posted by BettyZ

South Bend Clutch Stage 3 Daily Quiet Clutch Kit 530TQ

That's what I run. I love it, it's a great clutch. Of course once we get my car figured out I'll probably destroy it quickly.

BettyZ · 12-08-2020, 10:30 PM

Quote:

Originally Posted by redondoaveb

That's what I run. I love it, it's a great clutch. Of course once we get my car figured out I'll probably destroy it quickly.

Excellent! And ehhh, the supercharger will probably chit the bed first.

redondoaveb · 12-08-2020, 11:03 PM

Quote:

Originally Posted by BettyZ

Excellent! And ehhh, the supercharger will probably chit the bed first.

Let me school you on superchargers. The new one is externally oil fed (that mean's it lubricated by the engine oil). Are you still with me? Unlike the self contained unit that I ran before (I'm not losing you am I?), the new one doesn't have an oil slinger and can be spun at an extremely high rpm without failing unlike the previous supercharger. Now, if you said, "your engine will probably chit the bed first", you might have been right.

BettyZ · 12-08-2020, 11:10 PM

Quote:

Originally Posted by redondoaveb

Let me school you on superchargers. The new one is externally oil fed (that mean's it lubricated by the engine oil). Are you still with me? Unlike the self contained unit that I ran before (I'm not losing you am I?), the new one doesn't have an oil slinger and can be spun at an extremely high rpm without failing unlike the previous supercharger. Now, if you said, "your engine will probably chit the bed first", you might have been right.

Hahahaha thank you for educating me on the subject matter. Before this, the sum of my knowledge on SCs was that yours went kablooey after like, 60 miles.

Sent from my SM-G955U using Tapatalk

Leingod · 12-08-2020, 11:16 PM

Note to self.

Old SC sounded like pycho ex gf screaming. New SC sounds like current gf screaming.

12-08-2020, 11:16 PM	#150 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684396	Note to self. Old SC sounded like pycho ex gf screaming. New SC sounds like current gf screaming. Rusty, Hotrodz, Ghostvette and 3 others like this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coolerworx shifter	redondoaveb	Engine & Drivetrain	97	05-19-2020 04:24 PM
Aftermarket 370Z shifter handle and shifter knobs for automatic transmissions	Quicksilvers	Exterior & Interior	17	03-25-2018 10:48 AM
What is the best short-throw shifter and shifter knob combo?	ZInferno0248	Nissan 370Z General Discussions	79	03-06-2017 07:57 AM
[WTB] Factory Shifter Assembly or just the white snap on mount bushing	theZspot	Parts for sale (Private Classifieds)	0	01-29-2015 01:44 AM
[WTB] Stock Shifter assembly.	rinaudo	Parts for sale (Private Classifieds)	1	08-03-2012 04:03 AM