FE-Design Carbon Fiber Fender Vents

Rusty · 12-22-2018, 01:44 PM

Late stocking stuffer.

Hotrodz · 12-26-2018, 09:08 PM

Here is picture of the first set that was delivered.

Sent from my SM-G965U using Tapatalk

derraj06 · 12-26-2018, 09:35 PM

Hey that blue thing is mine!

I’m working on the driver side tonight and providing some info to FE on the template and some measurements. My end goal is to do a write up next week once I’m happy with the fitment (not seeing any part issues, it’s just a bit of a bear to make things my version of perfect.) if you guys would find it helpful. I’ve spent about 30 hours on the various things with this firs tset. Roughly half of that is just measurements and info for FE but I would gues this will be about a 20-40 hour ordeal for most depending on how carefully you want to cut it but I am doing this with the fenders on the car as I still drive it daily.

madwi · 12-26-2018, 09:49 PM

Quote:

Originally Posted by derraj06

Hey that blue thing is mine!

I’m working on the driver side tonight and providing some info to FE on the template and some measurements. My end goal is to do a write up next week once I’m happy with the fitment (not seeing any part issues, it’s just a bit of a bear to make things my version of perfect.) if you guys would find it helpful. I’ve spent about 30 hours on the various things with this firs tset. Roughly half of that is just measurements and info for FE but I would gues this will be about a 20-40 hour ordeal for most depending on how carefully you want to cut it but I am doing this with the fenders on the car as I still drive it daily.

I certainly appreciate the time and effort you have put into this.

Rusty · 12-26-2018, 10:53 PM

Quote:

Originally Posted by madwi

I certainly appreciate the time and effort you have put into this.

derraj06 · 12-28-2018, 06:19 PM

So small update, at the request of a friend on here I put a few of my passenger side progress pictures in a public album on my profile. Check them out if you want an idea of what you’ll go through.

I plan to put together a DIY next week highlighting the following:

-Basic install with things I personally ran into.
-My version of cutting the fender liner with optional adding mesh to protect the vent from debris
-tools I used
-many photos to document the whole thing.

I don’t really plan to go down to the nut and bolt level as this isn’t something simple so I’ll make an assumption that a basic understand of finding clips and bolts is a skill the reader will have. Anyone want to see anything else?

madwi · 12-28-2018, 06:58 PM

Quote:

Originally Posted by derraj06

So small update, at the request of a friend on here I put a few of my passenger side progress pictures in a public album on my profile. Check them out if you want an idea of what you’ll go through.

I plan to put together a DIY next week highlighting the following:

-Basic install with things I personally ran into.
-My version of cutting the fender liner with optional adding mesh to protect the vent from debris
-tools I used
-many photos to document the whole thing.

I don’t really plan to go down to the nut and bolt level as this isn’t something simple so I’ll make an assumption that a basic understand of finding clips and bolts is a skill the reader will have. Anyone want to see anything else?

Works for me.

Rusty · 12-28-2018, 07:02 PM

Cutting torch works for me.

Hotrodz · 12-28-2018, 07:25 PM

Quote:

Originally Posted by Rusty

Cutting torch works for me.

And a sledgehammer and chisel for meà

Sent from my SM-G965U using Tapatalk

Ni55anPat · 12-30-2018, 09:35 PM

I’m assuming it’s to late to order a set?

Rusty · 12-30-2018, 09:41 PM

Quote:

Originally Posted by Ni55anPat

I’m assuming it’s to late to order a set?

I don't think so. But I don't think you would get the same pricing. Get in contact with them to make sure.

gbrettin · 01-01-2019, 08:47 PM

Wow! These things look great!

Sent from my SM-G930P using Tapatalk

JTM88 · 01-01-2019, 11:32 PM

Damn those look good!

Sent from my iPhone using Tapatalk

cv129 · 01-02-2019, 12:18 AM

That blue GT3RS....I meant Z....looks super duper awesome!

OptionZero · 01-02-2019, 01:37 PM

I am not doubting the functionality of these - i'm sure they work

however

from an aesthetic standpoint, the large black "frame" that actually surround the vents and mount to the fender are kinda too much for me

Is there room to mount these on the BACK of the fender?

again - purely for the appearance

12-22-2018, 01:44 PM	#151 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,271 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Late stocking stuffer. gbrettin and redondoaveb like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-26-2018, 09:08 PM	#152 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Here is picture of the first set that was delivered. Sent from my SM-G965U using Tapatalk andy_meng1024, VABAM, gbrettin and 5 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

12-26-2018, 09:35 PM	#153 (permalink)
derraj06 Enthusiast Member Join Date: Jun 2013 Location: Huntsville, AL Posts: 406 Drives: MB 370z Rep Power: 12	Hey that blue thing is mine! I’m working on the driver side tonight and providing some info to FE on the template and some measurements. My end goal is to do a write up next week once I’m happy with the fitment (not seeing any part issues, it’s just a bit of a bear to make things my version of perfect.) if you guys would find it helpful. I’ve spent about 30 hours on the various things with this firs tset. Roughly half of that is just measurements and info for FE but I would gues this will be about a 20-40 hour ordeal for most depending on how carefully you want to cut it but I am doing this with the fenders on the car as I still drive it daily. VABAM, gbrettin, Rusty and 2 others like this. __________________ 2010 Monterey Blue 370Z

12-28-2018, 06:19 PM	#156 (permalink)
derraj06 Enthusiast Member Join Date: Jun 2013 Location: Huntsville, AL Posts: 406 Drives: MB 370z Rep Power: 12	So small update, at the request of a friend on here I put a few of my passenger side progress pictures in a public album on my profile. Check them out if you want an idea of what you’ll go through. I plan to put together a DIY next week highlighting the following: -Basic install with things I personally ran into. -My version of cutting the fender liner with optional adding mesh to protect the vent from debris -tools I used -many photos to document the whole thing. I don’t really plan to go down to the nut and bolt level as this isn’t something simple so I’ll make an assumption that a basic understand of finding clips and bolts is a skill the reader will have. Anyone want to see anything else? VABAM, gbrettin, Rusty and 2 others like this. __________________ 2010 Monterey Blue 370Z

12-28-2018, 07:02 PM	#158 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,271 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Cutting torch works for me. VABAM, gbrettin, Hotrodz and 1 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-30-2018, 09:35 PM	#160 (permalink)
Ni55anPat A True Z Fanatic Join Date: Mar 2010 Location: Chicago Posts: 1,831 Drives: Zed Rep Power: 18	I’m assuming it’s to late to order a set?

01-01-2019, 08:47 PM	#162 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,287 Drives: Tricycle Rep Power: 589151	Wow! These things look great! Sent from my SM-G930P using Tapatalk VABAM, God-Speed, cv129 and 3 others like this.

01-01-2019, 11:32 PM	#163 (permalink)
JTM88 Enthusiast Member Join Date: Oct 2016 Location: Houston, TX Posts: 276 Drives: 2012 370Z Rep Power: 14	Damn those look good! Sent from my iPhone using Tapatalk __________________ 2012 Base Gun Metallic MT6 -CNT Racing CBE-Swift Sport Springs-Sport Akebono BBK-Z1 Motorsports Intakes-König Oversteer Wheels-1320 Resonated Test Pipes -RJM Rev 2.1 Clutch Pedal-

01-02-2019, 12:18 AM	#164 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,249 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	That blue GT3RS....I meant Z....looks super duper awesome! gbrettin likes this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

01-02-2019, 01:37 PM	#165 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,246 Drives: 15 370Z Nismo 6MT Rep Power: 214100	I am not doubting the functionality of these - i'm sure they work however from an aesthetic standpoint, the large black "frame" that actually surround the vents and mount to the fender are kinda too much for me Is there room to mount these on the BACK of the fender? again - purely for the appearance 370Z JT likes this. __________________ OptionZero Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Finite Element Design Fender Vents	cv129	Exterior & Interior	7	06-07-2018 08:17 PM
[WTB] Wtb:) carbon fiber fender	TaiShu	Parts for sale (Private Classifieds)	0	06-30-2017 08:10 PM
[FOR SALE] Carbon Signal 2 piece fender with extended vents!	Kaden44	Parts for sale (Private Classifieds)	7	03-05-2016 08:22 PM
[FOR SALE] Carbon Fiber GTR Hood Vents	Alexwallace23	Parts for sale (Private Classifieds)	4	05-05-2014 09:55 PM
Help Us Develop The Design For New Carbon Fiber Engine Covers	Mike@Blackline	Exterior & Interior	21	11-12-2009 08:53 PM