ZSPEC Fastener Kit Install Guide
 

Does anyone have a copy of the basic install guide for the ZSPEC Fastener Kit?

https://zspecdesign.com/zspec-ultima...70z-all-trims/

I've tried emailing Zspec directly with no luck.

Try Z1.

Z1 Motorsports
2877 Carrollton-Villa Rica Hwy
Carrollton, GA 30116
United States of America
P: (770) 838-7777
E: Info@Z1Motorsports.com

I just kind've guessed and went off of what I "thought" each packet meant. Needless to say I have over half of the package left.

Just a heads up though, don't change out the bolt that grounds the starter. I tried sanding it and everything else to make sure it had a clean connectionT. he car didn't like it and would either start maybe 10% of the time or (more often) not start and just start smoking.

I just emailed the owner to see what they can help you with. I let you know what he says...

Trying to help out a fellow 370Z-er :tiphat:

That's kind of where I'm at; just guessing what goes where.

Thanks, I appreciate it! I did get a rep on the phone the other day, and found out that the "basic installation guide" is really just instructions on using Loc-tite, etc. It doesn't contain any specific instructions for the various bolts.

I should also point out that I bought my kit from a forum member on here. Although it was new, many of the parts had been dumped into a larger bag and thus are not labeled at all.

The Z Spec fastener kit looks very nice in the engine bay. Good write up.

Nice kit but $100 retail?