STILLEN 370Z Urethane Fascia - Sneak Peek - In Development

Josh@STILLEN · 12-24-2009, 02:47 PM

We wanted to give you a sneak peek at the 370Z fascia that we've been working on, and describe some of the planned features of this new piece.

As always this front fascia will be constructed out of durable polyurethane. Polyurethane is definitely a more expensive process when it comes to building the molds and the machinery required but the durability, quality, and fit and finish of the final products are by far superior.

When we sat down to discuss the concepts of the fascia the number one thing we all agreed on was function. This fascia needed to supply as much air as possible to some of the key components of the car. Some of those considerations were, STILLEN Gen 3 Intakes, intercooler systems, additional coolers, possible brake cooling. Another hot topic were the O.E. fangs. Some people love them, some people hate them, but without question they are a very distinct feature on the car. To please everyone and again, improve functionality we are going to make a modular piece that will attach to the inside of the center opening and will resemble the O.E. fang pieces as well function as brake ducts. These pieces will be available options for people who want to add them later on but will not be included in the main kit.

So, here are the photos, we hope you enjoy, and as always your feedback is welcomed!

RCZ · 12-24-2009, 03:09 PM

Those side vents are huge, maybe big enough to throw the oil cooler to the side.

Trips · 12-24-2009, 03:14 PM

Will the vent's be functional for brake cooling?

edit read the function options...duh

FuszNissan · 12-24-2009, 03:45 PM

I am not sure what to think of yet. Might have to wait and see the finished product. I am up in the air right now.

Josh@STILLEN · 12-24-2009, 04:42 PM

It's tough to visualize sometimes when products are in this stage of rawness, and not sure these pictures really give a good impression, but wanted to post them rather than wait.

simota1 · 12-24-2009, 05:20 PM

this makes me excited

i can see it now.....

lemansz20 · 12-24-2009, 05:41 PM

I am liking it, seems like a clean, not overstated design, does look a little high for a bumper, but then again might just be the picture, one thing I hope is that the bumper, matches and is at the same height of any sideskirts you guys make so it flows, unlike other kits where the sideskirts are lower then the front bumper.

Kyle@STILLEN · 12-24-2009, 05:50 PM

As you can see this has been modeled off of the factory fascia so it is the same height as factory. We will definitely be building the rockers to match this ride height.

spearfish25 · 12-24-2009, 05:52 PM

Interesting. I'll have to see how the grill opening is 'dressed' and would want to do the brake cooling kit (assuming there will be one) at the same time. Otherwise those huge vents just dead end and look silly. I wish the line of the headlights was carried down through the lateral borders of the front grill. Maybe the fang insert will do just that.

simota1 · 12-24-2009, 06:24 PM

since its the same height as the stock bumper will there be like a additional lip kit like the zele carbons own? except in poly....

Goolsbymd · 12-24-2009, 06:32 PM

I like it. Will be keeping an eye on this

Mike · 12-24-2009, 07:11 PM

Hmm, not sure. I was hoping for just a bolt on lower lip spoiler in urethane.

RCZ · 12-24-2009, 07:27 PM

Mike, I think they are doing that ALSO.

This bumper looks very Stillen. I would like to see a finished version. Kinda makes the front end look narrower.

gladeslvrcoq · 12-24-2009, 08:01 PM

Quote:

Originally Posted by RCZ

Mike, I think they are doing that ALSO.

This bumper looks very Stillen. I would like to see a finished version. Kinda makes the front end look narrower.

Got that right! Needs a longer nose and smaller ducts.

Kyle@STILLEN · 12-24-2009, 08:55 PM

In comparison to the factory nose this is actually anch or so longer. Also we did kick around the idea of smaller ducts (which are what's behind the cardboard) and they just looked too wimpy. Also the primary goal is increasing the amount of air through the car and as someone mentioned those large openings on the sides are perfect for additional coolers

.

12-24-2009, 02:47 PM	#1 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 533	STILLEN 370Z Urethane Fascia - Sneak Peek - In Development We wanted to give you a sneak peek at the 370Z fascia that we've been working on, and describe some of the planned features of this new piece. As always this front fascia will be constructed out of durable polyurethane. Polyurethane is definitely a more expensive process when it comes to building the molds and the machinery required but the durability, quality, and fit and finish of the final products are by far superior. When we sat down to discuss the concepts of the fascia the number one thing we all agreed on was function. This fascia needed to supply as much air as possible to some of the key components of the car. Some of those considerations were, STILLEN Gen 3 Intakes, intercooler systems, additional coolers, possible brake cooling. Another hot topic were the O.E. fangs. Some people love them, some people hate them, but without question they are a very distinct feature on the car. To please everyone and again, improve functionality we are going to make a modular piece that will attach to the inside of the center opening and will resemble the O.E. fang pieces as well function as brake ducts. These pieces will be available options for people who want to add them later on but will not be included in the main kit. So, here are the photos, we hope you enjoy, and as always your feedback is welcomed!

12-24-2009, 03:14 PM	#3 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Will the vent's be functional for brake cooling? edit read the function options...duh __________________ Last edited by Trips; 12-24-2009 at 03:17 PM.

12-24-2009, 03:45 PM	#4 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	I am not sure what to think of yet. Might have to wait and see the finished product. I am up in the air right now. __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

12-24-2009, 05:20 PM	#6 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	this makes me excited i can see it now..... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

12-24-2009, 05:52 PM	#9 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	Interesting. I'll have to see how the grill opening is 'dressed' and would want to do the brake cooling kit (assuming there will be one) at the same time. Otherwise those huge vents just dead end and look silly. I wish the line of the headlights was carried down through the lateral borders of the front grill. Maybe the fang insert will do just that. __________________ 2013 Cadillac V-Wagon, RIP Z Last edited by spearfish25; 12-24-2009 at 05:54 PM.

12-24-2009, 03:09 PM	#2 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Those side vents are huge, maybe big enough to throw the oil cooler to the side.

12-24-2009, 04:42 PM	#5 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 533	It's tough to visualize sometimes when products are in this stage of rawness, and not sure these pictures really give a good impression, but wanted to post them rather than wait.

12-24-2009, 05:41 PM	#7 (permalink)
lemansz20 Banned Join Date: Aug 2009 Location: THe world Posts: 195 Drives: Nissan Maxima Rep Power: 0	I am liking it, seems like a clean, not overstated design, does look a little high for a bumper, but then again might just be the picture, one thing I hope is that the bumper, matches and is at the same height of any sideskirts you guys make so it flows, unlike other kits where the sideskirts are lower then the front bumper.

12-24-2009, 05:50 PM	#8 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 306	As you can see this has been modeled off of the factory fascia so it is the same height as factory. We will definitely be building the rockers to match this ride height.

12-24-2009, 06:24 PM	#10 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	since its the same height as the stock bumper will there be like a additional lip kit like the zele carbons own? except in poly.... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

12-24-2009, 06:32 PM	#11 (permalink)
Goolsbymd Base Member Join Date: Oct 2009 Location: Hampton, VA Posts: 84 Drives: 09 370z Rep Power: 16	I like it. Will be keeping an eye on this __________________ 09 370 base w/ sport AT Mag. Black, 20% tint, CF B Pillars, MR Works LED/Blacked out light combo. Soon: Stillen SC/Venaci Heros/Carbon fiber pieces.

12-24-2009, 07:11 PM	#12 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	Hmm, not sure. I was hoping for just a bolt on lower lip spoiler in urethane. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

12-24-2009, 07:27 PM	#13 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Mike, I think they are doing that ALSO. This bumper looks very Stillen. I would like to see a finished version. Kinda makes the front end look narrower.

12-24-2009, 08:55 PM	#15 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 306	In comparison to the factory nose this is actually anch or so longer. Also we did kick around the idea of smaller ducts (which are what's behind the cardboard) and they just looked too wimpy. Also the primary goal is increasing the amount of air through the car and as someone mentioned those large openings on the sides are perfect for additional coolers .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber front fascia?	kannibul	Exterior & Interior	21	09-30-2009 02:19 AM
front fascia cost?	Snakes709	Nissan 370Z General Discussions	7	09-22-2009 08:15 AM
Sneak Peek, Carbon Fiber B-Pillars @ The 370ZSOURCE!!!	Michael@TheZStore	Exterior & Interior	3	08-25-2009 06:21 PM
Sneak Peek, Carbon Fiber Door Sills @ The 370ZSOURCE!!!!!	Michael@TheZStore	Exterior & Interior	2	07-29-2009 04:58 PM
Going to sneak a peek at a 2010 Genesis Coupe in a few minutes!!!	iamtherhino	Other Vehicles	5	03-07-2009 11:08 AM